以催化油浆窄馏分为添加剂的Al－MCM－41分子筛的合成

 采用阳离子表面活性剂十六烷基三甲基溴化铵为模板剂，以正硅酸乙酯为硅源，以硫酸铝为铝源，水热合成了以催化油浆窄馏分为添加剂的高比表面积Al－MCM－41介孔分子筛，并利用XRD，HREM，TG－DTA及N2吸附－脱附等测试手段对合成样品进行了表征．合成的Al－MCM－41分子筛的比表面积和孔体积分别达到1295m2／g和1．5cm3／g，其平均孔径为4．3nm．重点研究了Al－MCM－41分子筛结晶度、晶胞参数、比表面积、孔体积及平均孔径等结构性质随催化油浆窄馏分添加量及其组成的变化规律，并从合成机理上进行了解释．     

Composition of <Emphasis Type="Italic">Carlina acanthifolia</Emphasis> Root Essential Oil

The root of Carlina acanthifolia All. (Asteraceae) contained 1.0% of essential oil (expressed in g per 100 g of dried plant material). Using GC and GC/MS, nine components were identified (100% of total oil). The structure of benzyl 2-furylacetylene (carlina oxide), which is the principal component of the oil (91.5%), was spectrometrically identified. __________ Published in Khimiya Prirodnykh Soedinenii, No. 4, pp. 331–332, July–August, 2005.     

STUDIES ON TUNG OIL COATED REGENERATED CELLULOSE FILMS WITH WATERRESISTANCE

Regenerated cellulose films with water-resistance were obtained by an improved method ofpreparing cellulose cuoxam solution from pulps of agricultural wastes (linters, wheat straw, reedand Bamao). Experimental results showed that the mechanical properties of both the dry. and wetfilms were excellent. Data from IR, SEM and tensile strength measurements implied that thesignificant improvement of water-resistance of the films was due to the cohesion between the thinTung oil covers with hydrophobicity and the regenerated cellulose films. The films werecompletely biodegraded after being buried in soil for 100 days. The transmittance of the filmsderived from linter and reed in visible band range were 80-90%.     

GC-MS Analysis of the Essential Oil from the Oleoresin of Pistacia atlantica var. mutica

The oleoresin of Pistacia atlantica var. mutica, growing in different regions of Iran, is a popular naturally occurring chewing gum and has been used traditionally in the treatment of peptic ulcer. The GC-MS analysis of the essential oil, obtained from steam distillation of the oleoresin of P. Atlantica var. mutica, has led to the identification and quantification of eleven terpenoids, -pinene (70%), -pinene (1.94%), 3-carene (0.2%), carveol (2.18%), epoxypinene (2.15%), limonene oxide (9%), myrtenol (5.31%), limonene (0.62%), citral (5.72%), -phellandrene (0.2%), and -myrcene (0.3%). The total amount of essential oil obtained was 22% v/w which is higher than any other species of the genus Pestacia.     

Determining the wax content of crude oils by using differential scanning calorimetry

By the use of differential scanning calorimetry (DSC), a new method to measure the wax content of crude oil has been developed. In this paper, the wax content of a crude oil is proposed and proved to be the Q (total thermal effect of wax precipitation in sample) ratio of the crude oil and its corresponding wax obtained by using standard acetone method, i.e. Q_oil/Q_wax. For the 14 studied crude oils with the wax content ranging from 1 to 27 wt.%, the wax contents determined by the presented method are in good agreement with those determined by standard acetone method, with an absolute average deviation of only 0.82 wt.%. This method has an advantage over reported DSC methods in which the exact dissolution or precipitation enthalpy of wax is a must. It is also found that the wax contents determined by either of the two methods show good linear relationship with the total thermal effect Q_oil, with the correlation coefficients over 0.96. According to the empirical correlations, the wax content of a crude oil can be easily determined by using the DSC total thermal effect Q_oil. In addition and more significantly, the new method can be applied to improve the accuracy in determining the amount of precipitated wax in a waxy crude oil at different temperatures.     

Ultra-fast essential oil characterization by capillary GC on a 50 microm ID column

A 5 m x 50 microm capillary column with 0.05 microm stationary phase film thickness, with a calculated efficiency of almost 20,000 plates per metre (under optimum conditions), was used for very fasthigh resolution GC analysis of lime essential oil. The total analysis time of this volatile essential oil was less than 90 s. Fast GC is shown to be appropriate for essential oil quality assurance analysis, and quantitative results of key components are comparable with those obtained by using conventional GC analysis. The fast GC analysis is approximately 33 times faster than the conventional GC method.     

原油溶胶-凝胶等温转变过程中的流变性研究

使用RS75流变仪，采用小振幅振荡剪切方法和稳态剪切方法对含蜡原油在溶胶 -凝胶等温转变过程中的流行了研究．结果表明，等温转变成的凝胶原油的结构在 很大程度上决定于预剪切速率，非牛顿含蜡原油在结构恢复过程中表现出不可逆的 触变特性．而凝胶原油在外力作用下向溶胶状态转变的过程中，要经历从线性粘弹 性变形，到非线性粘弹性变形，再到结构屈服的过程，且高剪切应力下的溶胶原油 结构与预剪切速率无关．     

原油乳状液破乳的动态法研究

The stability of different crude oil emulsions from ASP flooding production well is studied by the method of a stirred tank. The demulsifying of crude-oil emulsion by different demulsifying agents is discussed. The breakage of the crude oil emulsions from the well PO11 by the different types and concentrations of the emulsifying agents is also discussed. The breaking mechanism of the demulsifying agent is described microscopically.     

Direct analysis of alkylnaphthalenes in crude oils by two-dimensional capillary gas chromatography

Summary Diaromatics are geochemically significant constituents of crude oils. Their determination is usually achieved by elaborate prefractionation methods, such as medium pressure liquid chromatography and HPLC, prior to capillary gas chromatography. The present contribution describes the quantitative analysis of methylnaphthalenes, ethylnaphthalenes, and dimethylnaphthalenes in selected crude oils by two-dimensional capillary GC. Since the method does not comprise any work-up procedure the determination of geochemical parameters (alkylnaphthalene concentration ratios) is performed on the original, untreated crude oil samples. Accordingly, the analytical results reflect the original composition. The influence by evaporational losses in the laboratory is minimized.     

Quantitative determination of paraffin oil in blood by capillary gas chromatography

A capillary gas chromatographic method is described for the quantitative determination of liquid paraffin in blood. Paraffin is extracted from blood into n-heptane. After solvent evaporation and dissolution of the residue in 100–200 μl n-heptane one μl is injected into a gas chromatograph fitted with a fused silica capillary column (Permabond® OV-1-CB-0.1, 10 m × 0.32 mm i.d.) and flame ionization detector. Analysis is performed by using an oven program [50°C (3 min)?285°C (5 min), rise 10%min]. The sensitivity (1.5 ng hexadecane) and the reproducibility prove the applicability of the method for the determination of liquid paraffin in blood and for the study of the stability of the liquid paraffin hollow fiber membranes used in an extracorporeal liver support system.