Naturally derived green bio-additives

During the last few years, special attention has been paid by the lubricant industry towards vegetable oil-based lubricants due to their biodegradability, renewability and excellent tribological properties. But to maintain the biodegradability of the final lubricants, the additive in the lubricants must also be biodegradable. Hence, in our present work, multifunctional lubricating oil additive based on castor oil has been investigated as a less toxic, feasible alternative to traditional petroleum based additives. Homopolymer of castor oil and its copolymer with α-pinene were synthesized by a thermal method using azobisisobutyronitrile as a radical initiator. Characterization of the prepared polymers was performed by spectral analysis and gel permeation chromatography (GPC). Additive performances of each of the prepared polymers as viscosity index improvers/viscosity modifiers and pour point depressants were carefully evaluated. Photo micrographic image was used to study the effectiveness of the additives as pour point depressants. Thermogravimetric analysis (TGA) was conducted to investigate the thermal response of the additives at high temperature. Finally, biodegradability of all the polymers was tested against fungal pathogen by the disc diffusion method and soil burial test. The study illuminated excellent additive performances of the polymers and thus their potential for acting as entirely naturally derived green bio-additives for lube oil.     

Membrane-based microchannel device for continuous quantitative extraction of dissolved free sulfide from water and from oil

Underground fluids are important natural sources of drinking water, geothermal energy, and oil-based fuels. To facilitate the surveying of such underground fluids, a novel microchannel extraction device was investigated for in-line continuous analysis and flow injection analysis of sulfide levels in water and in oil. Of the four designs investigated, the honeycomb-patterned microchannel extraction (HMCE) device was found to offer the most effective liquid–liquid extraction. In the HMCE device, a thin silicone membrane was sandwiched between two polydimethylsiloxane plates in which honeycomb-patterned microchannels had been fabricated. The identical patterns on the two plates were accurately aligned. The extracted sulfide was detected by quenching monitoring of fluorescein mercuric acetate (FMA). The sulfide extraction efficiencies from water and oil samples of the HMCE device and of three other designs (two annular and one rectangular channel) were examined theoretically and experimentally. The best performance was obtained with the HMCE device because of its thin sample layer (small diffusion distance) and large interface area. Quantitative extraction from both water and oil could be obtained using the HMCE device. The estimated limit of detection for continuous monitoring was 0.05 μM, and sulfide concentrations in the range of 0.15–10 μM could be determined when the acceptor was 5 μM FMA alkaline solution. The method was applied to natural water analysis using flow injection mode, and the data agreed with those obtained using headspace gas chromatography-flame photometric detection. The analysis of hydrogen sulfide levels in prepared oil samples was also performed. The proposed device is expected to be used for real time survey of oil wells and groundwater wells.     

基于油藏实际的稠油层内水热催化裂解机理研究

开展了稠油层内水热催化裂解技术在胜利油田的先导实验,五口井平均周期单井增油653 t,稠油初期降黏率达79.8%,措施14周后降黏率仍大于62%。利用Brookfield DV-Ⅲ黏度计、ElementarVario EL III元素分析仪、Knauer K-700蒸气压渗透仪、Agilent 6890N气相色谱仪和EQUINOX 55傅里叶变换红外光谱仪等,对措施前后稠油的物化性质进行分析。结果表明,层内水热催化裂解后稠油黏度及平均分子量减小、轻烃含量增加、重质组分含量减少、氢碳原子比增加、杂原子含量减小。稠油层内裂解反应受催化剂体系、高温水及储层矿物因素控制,催化剂是促进稠油裂解的主要因素,供氢剂及分散剂等助剂有助于提高裂解效果,高温水的酸碱性质及储层矿物对稠油具有催化裂解作用。多因素协同作用下使稠油发生脱侧链、分子链异构、断链、加氢、开环、成环、脱硫等系列反应,使得稠油大分子分解成小分子物质,降低了稠油黏度,改善了稠油品质,证实该技术在现场应用中具有可行性。     

Analysis and Fate of Dibenzothiophene Derivatives in the Marine Environment

Abstract

Dibenzothiophene (DBT) and related methylated derivatives are known to be among the most persistent and probably the most toxic PAH in the marine environment. Their analysis and their fate by photo-oxidation and biodegradation were studied.

The methylated DBT isomers, provided that they are resolved by high resolution GC, were used as organic markers of oil pollution in oysters. The determination of the relative distribution of the four monomethyl DBT allowed to characterize the source of pollution in an oyster-area in the North Brittany (France).

The fate of methylated DBT compounds was studied in a controlled sea-water enclosure where Arabian light oil was spilled. Analysis of the weathered oil showed that: (i) oil was degraded by photo-oxidation at a rate of 0.004% day; (ii) the half-lives of photolysis of methylated DBT was dependent upon the number of methyl groups on the aromatic nucleus: 8 days for DBT, 20 days for methyl-1 DBT and more than 2 years for trimethylated DBT. Compounds solubilized in the water column were identified as methyl-substituted dibenzothiophene sulfoxides and sulfones by HPLC with synchrofluorescence and GC-flame photometric detection.

The metabolic pathway of DBT was established in vitro. Rat microsomes transformed this substrate to DBT-5-oxide and subsequently to DBT-5-dioxide. Such an enzymatic S-oxidation was shown to be principally Cytochrome-P-450 dependent. It is suggested that the mixed-function oxidase (MFO) activity of marine species could be evaluated by this S-oxidation test in addition to the usual aryl hydrocarbon hydroxylase.     

Studies on Melamine Modified Polyesteramide as Anticorrosive Coatings from Linseed Oil: A Sustainable Resource

Melamine modified polyester amide (MPEA) was synthesized by the reaction of linseed oil fatty amide. The resin was further cured at room temperature by polystyrene co‐maleic anhydride (SMA) in different phr (30–80) to obtain MPEA coatings. The probable structure of MPEA was confirmed by FT‐IR, ¹H‐NMR and ¹³C‐NMR spectroscopic techniques. The physico‐chemical characterization of these resins viz. iodine value, saponification value, refractive index, inherent viscosity were carried out by standard methods. MPEA (40 wt%) solution in ethylene glycol monomethyl ether (EGME) was applied on a mild steel strip of standard sizes to study their physico‐mechanical and chemical resistance properties. It was found that coatings of MPEA with 60 parts per hundred of the resin (phr) of SMA showed the best performance in physico‐mechanical and alkali resistance properties. Thermal stability and curing behavior were studied by Thermo Gravimetric Analyses (TGA) and Differential Scanning Calorimetry (DSC), respectively.     

Effect of Chain Length of Polyethylene Glycol and Crosslink Density (NCO/OH) on Properties of Castor Oil Based Polyurethane Elastomers

The equilibrium swelling study of polyurethanes (PU) was carried out in various solvents in order to calculate their solubility parameter. The kinetics of swelling and sorption have also been studied in 1,4‐dioxane at 30°C. The PU was synthesized by reacting a novel polyol (castor oil derivative and epoxy based resin, EpxR) and one of the polyethylene glycols (PEG 200, PEG 400, PEG 600) with different weight compositions, with a toluene diisocyanate (TDI) adduct (derived from toluene diisocyanate and R60 polyol). Different NCO/OH ratio viz. 1, 1.3 and 1.7 were employed in the study. The results were found to vary with the weight composition of polyol components, as well as the crosslink density of the samples. The sorption behavior is also found to vary with the molecular weight of polyethylene glycol employed in the preparations of the polyurethanes. Kinetic studies of swelling revealed that the sorption is anomalous in nature. The diffusion coefficient (D) increased with an increase in the NCO/OH ratio and decreased with an increase in chain length of polyethylene glycol. The sorption coefficient (S) decreased with an increase in crosslink density (NCO/OH) and increased with increasing polyethylene glycol (i.e., PEG 200, PEG 400, and PEG 600) moieties in the polyurethanes. The molecular weight between two crosslink points was calculated using the Flory Rehner equation (24), and hence, the number of chains per unit volume (N) and degree of crosslinking (ν) in all the samples were determined.     

A New Polymer Flooding Agent Prepared Through Intermacromolecular Complexation

Abstract

This paper reports a new polymer flooding agent used for enhanced oil recovery (EOR), poly(acrylamide-acrylic acid) [P(AM-AA)]/poly(acrylamide-dimethyldiallylammonium chloride) [P(AM-DMDAAC)] polyelectrolyte complex. The solution viscosity of prepared P(AM-AA)/P(AM-DMDAAC) complex is enhanced due to the strong interaction between the two oppositely charged copolymers, i.e., P(AM-AA) and P(AM-DMDAAC), which were prepared through radical copolymerization. The ionic content could be controlled by changing the reaction conditions. The structures of the two copolymers were characterized through FT-IR, ¹H NMR, and acidic and precipitation titration. The formation as well as the factors affecting the P(AM-AA)/P(AM-DMDAAC) polyelectrolyte complex were investigated by means of viscosity measuring and light transmittance testing. The experimental results show that the composition of the copolymers, the pH value, and the concentration of the polymer solutions have remarkable effects on the formation of P(AM-AA)/P(AM-DMDAAC) polyelectrolyte complex and the solution viscosity. When DMDAAC content in P(AM-DMDAAC) is 3.2 mol%, AA content in P(AM-AA) is 48–58 mol%, the weight ratio of P(AM-AA) to P(AM-DMDAAC) is 70/30–30/70, the pH value of the solution is 6–10, and the concentration of solution is 1000–3500 ppm, then a homogeneous solution of P(AM-AA)/P(AM-DMDAAC) poly-electrolyte complex could be obtained which exhibits a much higher solution viscosity compared with its components.     

Styrene-PEG (600) DMA Crosslinked Polymers for Absorption of Oil Derivatives

In this work, styrene (St) based crosslinked polymers were prepared for removal of oil derivatives from aqueous solutions. Polyethylene glycol (600) dimethacrylate (PEG (600) DMA) was used as crosslinker in synthesis of styrene based crosslinked polymers, for the first time. The polymers were characterized by FTIR, SEM, elemental analysis and solvent (toluene, chloroform and fuel-oil) absorption capacities. The effects of different reaction parameters like crosslinker type, diluents amount and the presence of pore forming agent on the absorption properties of polymers were investigated. The polymers synthesized by using PEG (600) DMA have higher solvent absorption capacity than that of synthesized by using conventional crosslinker. Furthermore, the polymers synthesized in the presence of good diluents have higher absorption capacities. The addition of pore forming agent into the reaction medium has also improved the absorption rate of polymers. The absorption capacity of polymers in different solvents is in order of chloroform > toluene > fuel-oil. It was seen that oil derivatives can be removed efficiently from water by the St-PEG (600) DMA polymers.