流动注射-抑制化学发光测定阿莫西林的方法研究

基于阿莫西林对Co2+催化的鲁米诺-H2O2化学发光体系的抑制作用,首次建立了阿莫西林的流动注射化学发光抑制分析法。发光信号的降低值ΔΙ与阿莫西林的质量浓度在8×10-9~4×10-5g/mL的范围内呈良好的线性关系,检出限为2.7×10-9g/mL,对1.0×10-5g/mL阿莫西林测定的相对标准偏差为1.89%(n=11)。本方法快捷、简便且具有很高的灵敏度,可用于阿莫西林胶囊中阿莫西林含量的测定,并与药典规定的方法进行对照,结果满意。     

流动注射化学发光法测定阿莫西林

在碱性介质中 ,阿莫西林抗生素对鲁米诺 KMnO4化学发光反应有增敏作用 ,据此建立了微量快速测定阿莫西林的流动注射化学发光分析法。该法线性范围为 1 .0× 1 0 -7～ 5 .0× 1 0 -5g mL ,检出限为 3.0× 1 0 -8g mL ;对 1 .0× 1 0 -6g mL阿莫西林 1 1次平行测定 ,其相对标准偏差为 1 .7%。此法已用于阿莫西林胶囊中阿莫西林的测定。     

Medium-high frequency ultrasound and ozone based advanced oxidation for amoxicillin removal in water

In this study, treatment of an antibiotic compound amoxicillin by medium-high frequency ultrasonic irradiation and/or ozonation has been studied. Ultrasonic irradiation process was carried out in a batch reactor for aqueous amoxicillin solutions at three different frequencies (575, 861 and 1141 kHz). The applied ultrasonic power was 75 W and the diffused power was calculated as 14.6 W/L. The highest removal was achieved at 575 kHz ultrasonic frequency (>99%) with the highest pseudo first order reaction rate constant 0.04 min⁻¹ at pH 10 but the mineralization achieved was around 10%. Presence of alkalinity and humic acid species had negative effect on the removal efficiency (50% decrease). To improve the poor outcomes, ozonation had been applied with or without ultrasound. Ozone removed the amoxicillin at a rate 50 times faster than ultrasound. Moreover, due to the synergistic effect, coupling of ozone and ultrasound gave rise to rate constant of 2.5 min⁻¹ (625 times higher than ultrasound). In the processes where ozone was used, humic acid did not show any significant effect because the rate constant was so high that ozone has easily overcome the scavenging effects of natural water constituents. Furthermore, the intermediate compounds, after the incomplete oxidation mechanisms, has been analyzed to reveal the possible degradation pathways of amoxicillin through ultrasonic irradiation and ozonation applications. The outcomes of the intermediate compounds experiments and the toxicity was investigated to give a clear explanation about the safety of the resulting solution. The relevance of all the results concluded that hybrid advanced oxidation system was the best option for amoxicillin removal.     

Electrochemistry and Adsorptive Stripping Voltammetric Determination of Amoxicillin on a Multiwalled Carbon Nanotubes Modified Glassy Carbon Electrode

The study of electrochemical behavior of amoxicillin (AMX), a β‐lactam antibiotic, is described on a multiwalled carbon nanotubes (MWCNTs) modified electrode by electrochemical impedance spectroscopy (EIS) and adsorptive stripping voltammetry for sensitive determination of AMX in pharmaceutical and human urine samples within a wide pH range from 2.0 to 10.0. Also, studies by Fe₂O₃ nanoparticles modified carbon paste electrode show that iron oxide impurities in the MWCNTs are not active sites for sensing of amoxicillin. Under optimized conditions, the oxidation peak has two linear dynamic ranges of 0.6–8.0 and 10.0–80.0 μM with a detection limit of 0.2 μM and a precision of <4%.     

Different strategies for the direct determination of amoxicillin in human urine by second-order multivariate analysis of kinetic-spectrophotometric data

The kinetic evolution of UV-visible absorption spectra of amoxicillin in the presence of copper(II) ions has been processed by the second-order multivariate methods parallel factor analysis (PARAFAC) and also by a novel approach based on partial least-squares with residual bilinearization (PLS/RBL). The latter one is employed for the first time to evaluate kinetic-spectral information. The mechanism of the analyte metal-catalyzed hydrolysis involves a reaction intermediate and a final reaction product, both with spectra which may allow for the determination of amoxicillin in human urine, even in the presence of unsuspected sample components. This is possible thanks to the second-order advantage exploited by the employed chemometric algorithms, among which PARAFAC and PLS/RBL gave the best results. Amoxicillin was determined in a series of spiked and real urine samples, which allowed to perform, respectively, a recovery study and a comparison with the reference high-performance liquid chromatographic technique. The best figures of merit were obtained with PLS/RBL, namely sensitivity, 0.5 AU L mg⁻¹ (AU = absorbance units), analytical sensitivity, 500 L mg⁻¹ and limit of detection, 6 mg L⁻¹. Relative advantages and disadvantages of the employed algorithms are discussed.     

AuCl4--鲁米诺体系测定阿莫西林钠的含量

在NaOH介质中,AuCl4-氧化鲁米诺产生化学发光,阿莫西林钠显著增强该体系的发光,据此建立了测定阿莫西林钠的流动注射化学发光新方法.在优化的实验条件下,测定阿莫西林钠的线性范围为0.01～15 μg/mL,检出限为2.6 ng/mL,对1.0 μg/mL阿莫西林钠进行了11次平行测定,其相对标准偏差为1.7%.本法已用于针剂及血清中阿莫西林钠的测定.     

Metal chelates of ampicillin versus amoxicillin: synthesis,structural investigation,and biological studies

Solid chelates derived from some alkaline earth and transition metal complexes with ampicillin (Hamp, a) and amoxicillin (Hamox, b) were synthesized and characterized using elemental analysis, molar conductivity, IR, magnetic susceptibility, and thermogravimetric studies. Both drugs behave as tetradentate ligands coordinating to metal through amino, imino, and carboxylate as well as through β-lactamic carbonyl. All chelates have octahedral geometry except Cu(II) complexes which have square planar structure and uranium has pentagonal bipyramidal coordination. ¹H- and ¹³C-NMR of the Zn(II) and UO₂(VI) chelates are compared with the free ligands. The antimicrobial activity of the prepared chelates was determined.