金属—血清白蛋白的结构研究——Ⅵ.等离子点附近HSA和BSA中Cu(Ⅱ)和Ni(Ⅱ)金属中心的结构

本文用紫外光谱研究了等离子点附近HSA或BSA ¹Cu(Ⅱ)或Ni(Ⅱ)金属中心的结构。结果表明:在pH₄.0～5.3时,Cu(Ⅱ)—HSA配合物在低浓度时独具五配位的四方锥构型,高浓度时(>10^-4mol·l^-1)为四配位的四方平面构型,Cu(Ⅱ)—BSA、Ni(Ⅱ)—BSA在上述pH范围内均只存在四方平面构型。Cu(Ⅱ)、Ni(Ⅱ)结合位置与生理pH下的相同,均在白蛋白的N端三肽段上,与Asp^{1相似文献}   

Synthesis and properties of the copper(Ⅱ) complexes with stable radical

Four novel copper(Ⅱ) complexes have been synthesized,namely Cu(hfac)2NITPhNO2 (1),Cu(hfac)2NITPhCH3 (2),Cu(pfpr)2NITPhNO2,(3) and Cu(Pfpr)2NITPhCH3 (4),where hfac= hexafluoro-acetylacetonate,pfpr=pentafluoropropionate,NITR.=2-R-4,4,5,5-tetraniethyl-4,5-dihydro-1H-imidazolyl-1-oxyl-3-oxide.(R=4-nitrophenyl,4-methylphenyl).These complexes were rharicter-ized by elemental analyses,IR,electronic spectra and molar conductance.The temperature-dependent magnetic susceptibility of complexes 1 and 3 have been studied in the 4 300 K range,giving I he exchange integral J=10.56 cm-1 for complex 1 and J =-30.9 cm-1 for complex 3.     

催化动力学光度法测定痕量钴

研究了以镁试剂Ⅰ作指示物,Co(Ⅱ)催化过氧化氢氧化镁试剂Ⅰ褪色反应的动力学条件,据此提出催化光度法测定痕量钴的新方法.方法的灵敏度为 1.15×10~(-11)g·ml~(-1),测定范围0.06～0.25μg/25ml,用于酒类中钴含量的测定,结果良好.     

铜(II)-5-取代邻菲啰啉-二氧四胺大环三元体系的稳定性研究

The stability of copper (Ⅱ)-13-(2'-Hydroxy-3',5'-substituted benzyl)-1,4,8,11-tetraazacyclotetradecane-12, 14-dione(RTADO-14) binary complex compounds and of copper (Ⅱ)-5-substituted-1,10-phenanthrolines(R'TADO)-RTADO-14 ternary complex compounds was studied by means of pH titration method at 25.0±0.1 ℃ and I=0.1mol?dm-3KNO3. The formation constants of binary and ternary complexes were obtained. The structures of the binary and ternary complxes and the effects fo substituents on macrocyclic ligands and on R'Phen were also discussed.     

三辛基氧化膦(TOPO)萃取铟的研究

本文研究了三辛基氧化膦(TOPO)自盐酸溶液中萃取铟的性能,其萃取率是随酸度的增加而增加。与P_(350)和TBP相比较,萃取能力大小顺序为:TOPO>P_(350)>TBP经斜率法和化学分析法研究确定,TOPO白盐酸溶液中萃取铟的反应为:In_((a))~(3+)+H_((a))~++4Cl_((a))~-+2TOPO_((o))F(?)HInCl_4·2TOPO_((o))IR和NMR研究证明:铟是以H[InCl_4]形式被萃入TOPO有机相中的。     

样品价态对激光气化产生Cu/Cl团簇的组成和稳定性的影响

研究团控的形成条件、形成机理是目前团簇科学中的一个热点领域［‘］．产生气相团簇的方法主要有Knudsen高温炉扩散法、粒子溅射法、激光气化／分子束法、直接激光气化法·因为不需要另加缓冲气体，直接激光气化法【刀具有对体系真空要求较低，装置简单，容易和飞行时间质谱结     

CeO2担载Cu纳米粒子电催化CO2还原产乙烯：CeO2不同暴露晶面对催化性能的影响

Fossil fuels are expected to be the major source of energy for the next few decades. However, combustion of nonrenewable resources leads to the release of large quantities of CO₂, the primary greenhouse gas. Notably, the concentration of CO₂ in the atmosphere is increasing annually at an astounding rate. Electrochemical CO₂ reduction (ECR) to value-added fuels and chemicals using electricity from intermittent renewable energy sources is a carbon-neutral method to alleviate anthropogenic CO₂ emissions. Despite the steady progress in the selective generation of C₁ products (CO and formic acid), the production of multi-carbon species still suffers from low selectivity and efficiency. As an ECR product, ethylene (C₂H₄) has a higher energy density than do C₁ species and is an important industrial feedstock in high demand. However, the conversion of CO₂ to C₂H₄ is plagued by low productivity and large overpotential, in addition to the severe competing hydrogen evolution reaction (HER) during the ECR. To address these issues, the design and development of advanced electrocatalysts are critical. Here, we demonstrate fine-tuning of ECR to C₂H₄ by taking advantage of the prominent interaction of Cu with shape-controlled CeO₂ nanocrystals, that is, cubes, rods, and octahedra predominantly covered with (100), (110), and (111) surfaces, respectively. We found that the selectivity and activity of the ECR depended strongly on the exposed crystal facets of CeO₂. The overall ECR Faradaic efficiency (FE) over Cu/CeO₂(110) (FE ≈ 56.7%) surpassed that of both Cu/CeO₂(100) (FE ≈ 51.5%) and Cu/CeO₂(111) (FE ≈ 48.4%) in 0.1 mol·L^-1 KHCO₃ solutions with an H-type cell. This was in stark contrast to the exclusive occurrence of the HER over pure carbon paper, CeO₂(100), CeO₂(110), and CeO₂(111). In particular, the FE toward C₂H₄ formation and the partial current density increased in the sequence Cu/CeO₂(111) < Cu/CeO₂(100) < Cu/CeO₂(110) within applied bias potentials from -1.00 to -1.15 V (vs. the reversible hydrogen electrode), reaching 39.1% over Cu/CeO₂(110) at a mild overpotential (1.13 V). The corresponding values for Cu/CeO₂(100) and Cu/CeO₂(111) were FE_C2H4 ≈ 31.8% and FE_C2H4 ≈ 29.6%, respectively. The C₂H₄ selectivity was comparable to that of many reported Cu-based electrocatalysts at similar overpotentials. Furthermore, the FE for C₂H₄ remained stable even after 6 h of continuous electrolysis. The superior ECR activity of Cu/CeO₂(110) to yield C₂H₄ was attributed to the metastable (110) surface, which not only promoted the effective adsorption of CO₂ but also remarkably stabilized Cu⁺, thereby boosting the ECR to produce C₂H₄. This work offers an alternative strategy to enhance the ECR efficiency by crystal facet engineering.     

镀金和碳纳米管修饰金电极上吸附态葡萄糖氧化酶比活性的EQCM研究

采用石英晶体微天平(EQCM)技术监测了裸金电极、镀金和碳纳米管修饰金电极上葡萄糖氧化酶(GOD)的吸附过程. 通过EQCM测量吸附固定的GOD质量, 并实时检测酶反应产物H2O2的氧化电量, 求算了各表面上吸附态GOD的比活性(ESAi). 结果表明, 各表面上均可吸附一定的GOD, 且吸附态GOD均有一定的酶活性; 修饰CNTs可增大酶吸附量和酶电极对葡萄糖的响应电流, 但ESAi随CNTs修饰量的增大而降低; Au电极上电镀金后, 酶吸附量和酶电极对葡萄糖的响应电流亦增大, 但ESAi与裸金电极上的基本一致.     

Cu掺杂对LaMnO3催化剂的结构和催化氧化性能的影响

采用非晶态多核配合的方法合成了La1-xCuxMnO3(x=0、0.05、0.1、0.2、0.3、0.4、0.5)系列催化剂, 并用X射线衍射(XRD)、透射电镜(TEM)、比表面测定仪(BET)等手段对催化剂的微观结构进行了表征. 研究了Cu掺杂对钙钛矿结构及其对CO催化氧化发光性能及催化氧化CO、CH4性能的影响规律. 结果表明, 当x≤0.1 时, Cu掺杂仍可形成单相的钙钛矿结构; 当x>0.1时, 过量掺杂的Cu以CuO杂相存在. Cu掺杂可改善La1-xCuxMnO3催化剂对CO和CH4的催化氧化活性. 经700 ℃焙烧3 h制备的La0.9Cu0.1MnO3催化剂具有最高CO催化氧化活性(T100%=170 ℃), 该结果与CO催化氧化发光结果一致.而La0.95Cu0.05MnO3催化剂对CH4的催化氧化活性最高(T95%=705 ℃).     

C30卡宾三叶结分子结构与稳定性的理论研究

三叶结分子是最简单的非平凡纽结分子, C₃₀卡宾三叶结分子是由一条闭合的(C≡C—)₁₅ sp杂化碳链组成的, 是具有D₃对称性的拓扑手性分子. 本文用密度泛函方法[DFT/RB3LYP/6-31G(D)]对分子结构和光谱性质进行了研究, 在优化构型的基础上通过自然键轨道(NBO)方法和轨道能级研究了它的共轭性、成键情况和稳定性, 并与平面型C₃₀卡宾环分子进行了比较. 计算结果表明三叶结分子的三叶弧上形成了非平面的C≡C共轭和扭曲的内螺旋结构, 交叉处具有弱成键作用, 且分子轨道也发生了扭曲; 三叶结分子比卡宾环的共轭性和赝Jahn-Teller效应都明显小, 而总能量高. 因此, 分子打结是一个能量升高的过程.