低温加氢催化剂的设计: 理论与实践

简要总结了我们在C=C及C=O双键低温加氢双金属催化剂方面的最新研究成果. 首先, 我们以环己烯加氢为探针反应, 证明了平行使用多种研究手段的重要性, 包括单晶表面的基础研究与DFT计算, 多晶表面的合成与表征, 负载型催化剂的制备与性能测试等. 其次, 总结了双金属催化剂在其他加氢反应, 如丙烯醛C=O双键的选择性加氢, 苯的低温加氢, 以及乙炔的选择性加氢等反应中的应用. 最后, 讨论了利用金属碳化物代替贵金属Pt以减少双金属催化剂中Pt用量的可能性.     

焙烧对HZSM—5分子筛结构的影响

运用魔角自转固态核磁共振谱（ＭＡＳ－ＮＭＲ），研究了焙烧对ＨＺＳＭ－５分子筛结构的影响，结果表明，高温焙烧将引起ＨＺＳＭ－５分子筛骨架的脱铝，当焙烧温度从５００℃增加到７００℃时，ＨＺＳＭ－５的骨架Ｓｉ／Ａｌ比由１６．７增加至２２．７；而当焙烧温度由７００℃到８００℃时，骨架Ｓｉ／Ａｌ比则由２２．７增加到４８．５，Ａｌ－ＭＡＳＮＭＲ结果表明，从骨架上脱下来铝，部分地形成了ＮＭＲ不可见的无定形态，随     

Selective Oxidation of Methane to Methanol Using Molecular Oxygen on MoOx／（LaCoO3＋Co3O4） Catalysts

Comparatively high CH3OH selectivity (60.0%) and yield (6.7%) were obtained on MoOx/(LaCoO3 Co3O4) catalysts in selective oxidation of methane to methanol using molecular oxygen as oxidant. The interaction between MoOx and La-Co-oxide modified the molecular structure of molybdenum oxide and the ratio of O^-/O^2- on the catalyst surface, which controlled the catalytic performance of MoOx/(LaCoO3 Co3O4) catalysts.     

废水中偏二甲肼在Ni/Fe催化剂上的催化分解研究

研究了Ni/Fe催化剂对废水中偏二甲肼臭氧化分解的催化作用,考察了组分含量、体系的pH值和偏二甲肼初始浓度对催化反应的影响.结果表明,Ni/Fe催化剂对水中偏二甲肼的臭氧化具有良好的催化活性.催化剂组分含量、体系的pH值和初始浓度对反应的影响程度不大.对催化剂的XRD表征结果表明,催化剂主要由尖晶石结构的铁酸盐和FeNi3合金相组成,催化剂的良好催化性能与催化剂中尖晶石结构的铁酸盐和FeNi3合金相的形成有关.     

探究Cu/ZnO相互作用对CO2加氢制甲醇反应性能的影响

Using renewable green hydrogen and carbon dioxide (CO₂) to produce methanol is one of the fundamental ways to reduce CO₂ emissions in the future, and research and development related to catalysts for efficient and stable methanol synthesis is one of the key factors in determining the entire synthesis process. Metal nanoparticles stabilized on a support are frequently employed to catalyze the methanol synthesis reaction. Metal-support interactions (MSIs) in these supported catalysts can play a significant role in catalysis. Tuning the MSI is an effective strategy to modulate the activity, selectivity, and stability of heterogeneous catalysts. Numerous studies have been conducted on this topic; however, a systematic understanding of the role of various strengths of MSI is lacking. Herein, three Cu/ZnO-SiO₂ catalysts with different strengths of MSI, namely, normal precipitation Cu/ZnO-SiO₂ (Nor-CZS), co-precipitation Cu/ZnO-SiO₂ (Co-CZS), and reverse precipitation Cu/ZnO-SiO₂ (Re-CZS), were successfully prepared to determine the role of such interactions in the hydrogenation of CO₂ to methanol. The results of temperature-programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) characterization illustrated that the MSI of the catalysts was considerably affected by the precipitation sequence. Fourier transform infrared reflection spectroscopy (FT-IR) results indicated that the Cu species existed as CuO in all cases and that copper phyllosilicate was absent (except for strong Cu-SiO₂ interaction). Transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂O chemical titration results revealed that strong interactions between the Cu and Zn species would promote the dispersion of Cu species, thereby leading to a higher CO₂ conversion rate and improved catalytic stability. As expected, the Re-CZS catalyst exhibited the highest activity with 12.4% CO₂ conversion, followed by the Co-CZS catalyst (12.1%), and the Nor-CZS catalyst (9.8%). After the same reaction time, the normalized CO₂ conversion of the three catalysts decreased in the following order: Re-CZS (75%) > Co-CZS (70%) > Nor-CZS (65%). Notably, the methanol selectivity of the Re-CZS catalyst was found to level off after a prolonged period, in contrast to that of Co-CZS and Nor-CZS. Investigation of the structural evolution of the catalyst with time on stream revealed that the high methanol selectivity of the catalyst was caused by the reconstruction of the catalyst, which was induced by the strong MSI between the Cu and Zn species, and the migration of ZnO onto Cu species, which caused an enlargement of the Cu/ZnO interface. This work offers an alternative strategy for the rational and optimized design of efficient catalysts.     

Knoevenagel condensation catalysed by poly（vinyl chloride） supported tetraethylenepentamine （PVC-TEPA）

Poly(vinyl chloride) supported tetraethylenepentamine (PVC-TEPA) has been found to be an efficient catalyst for the Knoevenagel condensation. A wide range of aromatic aldehydes easily undergo condensations with ethyl cyanoacetate and malononitrile in the commercial 95% ethanol in refluxing using PVC-TEPA as catalyst to afford the desired products of good purity in moderate to excellent yields. A recycling study confirmed that the catalyst could be reused, the yield of the desired condensation product were not reduced. The merits of this protocol are environmentally benign, simple operation, convenient work-up and good yields. Furthermore, the catalyst can easily be recovered and reused at five times with comparable yields.     

Preparation of Small Particle Sized ZnAl-Hydrotalcite-Like Compounds by Ultrasonic Crystallization

Ultrasonic technology has been intensively studied recently due to its special features. In this paper, an ultrasonic crystallization method was introduced for the preparation of ZnAl-Hydrotalcite-Like compounds (ZnAl-HTLcs). Samples with high crystallinity, small particle size and narrow particle size distribution were obtained and fully characterized using conventional techniques of XRD, FT-IR and TGDTA. The results prove that both ultrasonic frequency and ultrasonic power have effects on the sizes of the product particles. By varying the ultrasonic power from 250 W to 88 W, with the ultrasonic frequency fixed at 59 kHz, the median particle size of the samples increased from 0.37 μm to 0.82 μm. By altering the hydrothermal treatment time from 1 h to 5 h at 110℃, the median particle size of ZnAl-HTLcs synthesized via ultrasonic crystallization increased from 0.88 μm to 1.11 μm.     

硫酸氢钠催化合成己酸异戊酯的研究

己酸异戊酯是应用最广泛的食用香料之一。通常它是在硫酸催化下由己酸和异戊醇酯化反应而得[1] ,硫酸虽然活性高 ,价廉 ,但选择性差 ,产品质量不好 ,设备腐蚀严重 ,同时产生大量废液 ,污染环境。已发现对甲苯磺酸、磺酸树脂、固体超酸、杂多酸、氯化铁以及过渡金属硫酸盐等均可作为酯化反应的优良催化剂[2～ 7] 。本文探讨了硫酸氢钠催化羧酸的酯化反应 ,结果发现它具有良好的催化性能 ,且后处理方便 ,无污染。1　实验部分在装有分水器、温度计和回流冷凝器的四颈烧瓶中 ,加入一定量分析纯的己酸、异戊醇、甲苯和催化剂硫酸氢钠 (ＮａＨＳＯ…     

某些多氮杂大环的合成与应用

多氮杂大环与许多金属离子能形成稳定的络合物。由于氮原子是三价的,因而多氮杂大环比冠醚具有更有利的结构;如果再导入羧基、膦酸基以及其他的亲水基团,则可得到一系列能形成水溶性金属络合物的配体。其中某些金属(如铜、钇等)的络合物在人体生理条件下表现出很好的稳定性,结合单原抗体技术的应用,这炎络合物在医疗、诊断方面有实用性。本文简单介绍某些代表性络合物的制备方法、物理性能和可能的应用。