模型昆虫翼作非定常运动时的气动力特性

基于Ｎａｖｉｅｒ－Ｓｔｏｋｅｓ方程的数值解,研究了一模型昆虫翼在小雷诺数（Ｒｅ＝１００）下作非定常运动时的气动力特性,这些运动包括：翼启动后的常速转动,快速加、减速转动,常速转动中快速上仰（模拟昆虫翼的上挥或下拍、翻转等运动）有如下结果：在小雷诺数下,模型昆虫翼以大攻角（α＝３５°）作常速转动运动时,由于失速涡不脱落,可产生较大的升为系数。其机理是：翼转动时,翼尖附近（该处线速度大）上翼面压强比翼根附近（该处线速度小）的小得多,因而存在展向压强梯度,同时存在着沿展向的离心力,此展向压强梯度和离心力导致的展向流动在失速涡的轴向方向,其可避免失速涡脱落。模型昆虫翼在快速加、减速转动和快速上仰运动中,虽然雷诺数小,但由于在短时间内产生了大涡量,也可产生十分大的气动力,例如在快速上仰运动中,升力系数可大于１０。     

昆虫飞行参数测量实验研究进展

在昆虫飞行的实验研究中,可采用活体实验、模型实验和活体模型结合三种方法。活体实验可以客观反映自然界中昆虫的飞行规律,获得真实的实验数据,但可重复性差。模型实验作为机械装置可以重复进行试验,详细描述流场结构并定量各种参数大小,但与真实飞行存在一定差距。单独使用这两种中的任一方法均可对一些现象给出了解释。二者相结合的方法更易于准确描述昆虫的运动特征,通过对比模型与活体的结果来提出机理,尽管需要的实验周期较长,但结论往往更接近真实状态,基于该方法科学家们已提出了几种飞行机理。本文结合近几年文献报道,综述了昆虫飞行参数测量方法,并对以上几种方法在研究昆虫飞行机理中的作用进行了对比分析,认为模型和活体结合的研究方法更容易为一些飞行现象提出合理解释。     

The influence of the wake of a flapping wing on the production of aerodynamic forces

The effect of the wake of previous strokes on the aerodynamic forces of a flapping model insect wing is studied using the method of computational fluid dynamics. The wake effect is isolated by comparing the forces and flows of the starting stroke (when the wake has not developed) with those of a later stroke (when the wake has developed). The following has been shown. (1) The wake effect may increase or decrease the lift and drag at the beginning of a half-stroke (downstroke or upstroke), depending on the wing kinematics at stroke reversal. The reason for this is that at the beginning of the half-stroke, the wing ``impinges' on the spanwise vorticity generated by the wing during stroke reversal and the distribution of the vorticity is sensitive to the wing kinematics at stroke reversal. (2) The wake effect decreases the lift and increases the drag in the rest part of the half-stroke. This is because the wing moves in a downwash field induced by previous half-stroke's starting vortex, tip vortices and attached leading edge vortex (these vortices form a downwash producing vortex ring). (3) The wake effect decreases the mean lift by 6%–18% (depending on wing kinematics at stroke reversal) and slightly increases the mean drag. Therefore, it is detrimental to the aerodynamic performance of the flapping wing. The project supported by the National Natural Science Foundation of China (10232010) and the National Aeronautic Science Fund of China(03A51049) The English text was polished by Xing Zhang     

Dynamic flight stability of a hovering model insect: lateral motion

The lateral dynamic flight stability of a hovering model insect （dronefly） was studied using the method of computational fluid dynamics to compute the stability derivatives and the techniques of eigenvalue and eigenvector analysis for solving the equations of motion. The main results are as following. （i） Three natural modes of motion were identified： one unstable slow divergence mode （mode 1）, one stable slow oscillatory mode （mode 2）, and one stable fast subsidence mode （mode 3）. Modes 1 and 2 mainly consist of a rotation about the horizontal longitudinal axis （x-axis） and a side translation; mode 3 mainly consists of a rotation about the x-axis and a rotation about the vertical axis. （ii） Approximate analytical expressions of the eigenvalues are derived, which give physical insight into the genesis of the natural modes of motion. （iii） For the unstable divergence mode, td, the time for initial disturbances to double, is about 9 times the wingbeat period （the longitudinal motion of the model insect was shown to be also unstable and td of the longitudinal unstable mode is about 14 times the wingbeat period）. Thus, although the flight is not dynamically stable, the instability does not grow very fast and the insect has enough time to control its wing motion to suppress the disturbances.     

Effects of unsteady deformation of flapping wing on its aerodynamic forces

Effects of unsteady deformation of a flapping model insect wing on its aerodynamic force production are studied by solving the Navier-Stokes equations on a dynamically deforming grid.Aerodynamic forces on the flapping wing are not much affected by considerable twist,but affected by camber deformation.The effect of combined camber and twist deformation is similar to that of camber deformation.With a deformation of 6% camber and 20°twist(typical values observed for wings of many insects),lift is increased bv 10%～20%and lift-to-drag ratio by around 10%compared with the case of a rigid flat-plate wing.As a result.the deformation can increase the maximum lift coefficient of an insect.and reduce its power requirement for flight.For example,for a hovering bumblebee with dynamically deforming wings(6?mber and 20°twist),aerodynamic power required is reduced by about 16%compared with the case of rigid wings.     

昆虫飞行的高升力机理

对近年来关于昆虫产生非定常高升力的研究进行了综述和归纳.这方面的工作对生物学研究和微型飞行器等微型机械的仿生设计有重要意义.研究表明:果蝇等昆虫翅膀的拍动运动可产生很大的非定常升力,其平均值是定常值的2~3倍,足够平衡昆虫的重量,并有较大的富余用于机动飞行;产生高升力有三个因素:一是拍动开始阶段翅的快速加速运动,二是拍动中的不失速机制,三是拍动结束阶段翅的快速上仰运动.人们从能耗的角度考察了这些非定常高升力机制的正确性和可行性.当作悬停飞行的果蝇用以上机制产生平衡其重量的升力时,其比功率(支持单位身体质量所需的功率)约为29W/kg, 生化/机械效率约为17%. 这些值与人们基于对昆虫肌肉力学特性的研究所预估的值接近.果蝇前飞时,其比功率随速度变化的曲线是一J形曲线,而不是象飞机或鸟的那样是一U形曲线;这与人们基于昆虫新陈代谢率的测量数据所推断的结果一致.对于蜻蜒等(功能上)有前、后两对翅膀的昆虫,有以下初步结果:翅的下拍主要产生升力,上挥主要产生推力;下拍时的平均升力系数可达2~3,十分大,上挥时的平均推力系数可达1~2, 也很大,它们主要由非定常效应产生;前、后翅的相互干扰并未起增大升力和推力的作用,反而有一定的不利作用.      

An analytic approach to theoretical modeling of highly unsteady viscous flow excited by wing flapping in small insects

Numerous studies on the aerodynamics of insect wing flapping were carried out on different approaches of flight investigations, model experiments, and numerical simulations, but the theoretical modeling remains to be explored. In the present paper, an analytic approach is presented to model the flow interactions of wing flapping in air for small insects with the surrounding flow fields being highly unsteady and highly viscous. The model of wing flapping is a 2-D flat plate, which makes plunging and pitching oscillations as well as quick rotations reversing its positions of leading and trailing edges, respectively, during stroke reversals. It contains three simplified aerodynamic assumptions: (i) unsteady potential flow; (ii) discrete vortices shed from both leading and trailing edges of the wing; (iii) Kutta conditions applied at both edges. Then the problem is reduced to the solution of the unsteady Laplace equation, by using distributed singularities, i.e., sources/sinks, and vortices in the field. To validate the present physical model and analytic method proposed via benchmark examples, two elemental motions in wing flapping and a case of whole flapping cycles are analyzed, and the predicted results agree well with available experimental and numerical data. This verifies that the present analytical approach may give qualitatively correct and quantitatively reasonable results. Furthermore, the total fluid-dynamic force in the present method can be decomposed into three parts: one due to the added inertial (or mass) effect, the other and the third due to the induction of vortices shed from the leading-and the trailing-edge and their images respectively, and this helps to reveal the flow control mechanisms in insect wing flapping. The project supported by the National Natural Science Foundation of China (10072066) and the Chinese Academy of Sciences (KJCX-SW-LO4, KJCX2-SW-L2)     

Large aerodynamic forces on a sweeping wing at low Reynolds number

The aerodynamic forces and flow structure of a model insect wing is studied by solving the Navier-Stokes equations numerically. After an initial start from rest, the wing is made to execute an azimuthal rotation (sweeping) at a large angle of attack and constant angular velocity. The Reynolds number (Re) considered in the present note is 480 (Re is based on the mean chord length of the wing and the speed at 60% wing length from the wing root). During the constant-speed sweeping motion, the stall is absent and large and approximately constant lift and drag coefficients can be maintained. The mechanism for the absence of the stall or the maintenance of large aerodynamic force coefficients is as follows. Soon after the initial start, a vortex ring, which consists of the leading-edge vortex (LEV), the starting vortex, and the two wing-tip vortices, is formed in the wake of the wing. During the subsequent motion of the wing, a base-to-tip spanwise flow converts the vorticity in the LEV to the wing tip and the LEV keeps an approximately constant strength. This prevents the LEV from shedding. As a result, the size of the vortex ring increases approximately linearly with time, resulting in an approximately constant time rate of the first moment of vorticity, or approximately constant lift and drag coefficients. The variation of the relative velocity along the wing span causes a pressure gradient along the wingspan. The base-to-tip spanwise flow is mainly maintained by the pressure-gradient force. The project supported by the National Natural Science Foundation of China (10232010)     

N-取代苯甲酰-N′-(5-甲氧基-2-甲硫基嘧啶-4-胺基)(硫)脲的设计、合成及生物活性研究

为了寻找新型高效、低毒、环境友好的农药先导化合物,以取代苯甲酸、α-甲氧基乙酸甲酯和甲酸乙酯为起始原料,设计合成了22个未见报道的N-取代苯甲酰-N′-(5-甲氧基-2-甲硫基嘧啶-4-胺基)(硫)脲10a~10v,其结构经1H NMR,IR和元素分析表征和确认.对目标化合物进行初步杀菌活性和昆虫生长调节活性筛选,生测结果表明:部分化合物具有较好的杀菌活性,如化合物10m和10p在50μg/m L下对黄瓜灰霉菌和油菜菌核菌的抑制率均超过70%,其中对后者的抑制率高于对照药剂95%百菌清;一些化合物对2~3龄库蚊幼虫表现出优良的昆虫生长调节活性,化合物10o和10r对幼虫的未羽化率达97.8%,化合物10t对幼虫具有100%灭杀活性.     

2-吡咯烷甲醇法合成切叶蚁警戒信息素

甲基庚酮;昆虫信息素;不对称烷基化反应;2-吡咯烷甲醇法合成切叶蚁警戒信息素