FM-AM Conversion Induced by Polarization Mode Dispersion in Fiber Systems

The conversion of the frequency modulated pulse induced from frequency modulation （FM） to amplitude modulation （AM） by the polarization mode dispersion （PMD） is theoretically and experimentally investigated. When there is no polarizer at the output end of a fiber system, the amplitude modulation depth is stable by 8%. Random amplitude modulation is observed when a polarizer is placed at the output end of the fiber system. The observed minimum and maximum modulation depths in our experiment are 5% and 80%, respectively. Simulation results show that the amplitude modulation is stable by 4% induced mainly by group velocity dispersion （GVD） when there is no polarizer, and the amplitude modulation depth displays the random variation character induced by the GVD and PMD. Lastly, a new fiber system scheme is proposed and little amplitude modulation is observed at the top of the output pulse.     

High Power Continuous-Wave Actively Mode-Locked Diode-Pumped Nd:YAG Laser

We demonstrate a diode-pumped cw mode-locked Nd：YAG by an acousto-optic mode locker. A mode-locked pulse with duration of 345 ps and output power of 12 W is obtained. The resonator design shows three advantages： a larger mode volume, high stability against thermal lens fluctuations, and excellent beam quality with TE00 mode. Different from previous active mode locking designs, we employ a frequency stabilizer and a phase-lock loop circuit to ensure the mode locking stable operation.     

Experiment of C-Band Wavelength Conversion in a Silicon Waveguide Pumped by Dispersed Femtosecond Laser Pulse

We experimentally demonstrate the C-band wavelength conversion using four-wave mixing in a 17-mm-long silicon-on-insulator waveguide pumped by a dispersed mode-locked femtosecond laser pulse. The idler can be observed with an incident average pump power lower than 4 dBm, and about 35 nm of conversion bandwidth from 1530nm to 1565nm is measured by using a 1550-nm pump wavelength. The pulse-pumped efficiency is demonstrated to be higher, by more than 22 dB, than the cw-pumped efficiency. The conversion efficiency variations with respect to the pump and signal powers are also investigated.     

Influence of O2 Flux on Compositions and Properties of ITO Films Deposited at Room Temperature by Direct-Current Pulse Magnetron Sputtering

Indium tin oxide （ITO） films were deposited on glass substrates at room temperature by dc pulse magnetron sputtering. Varying 02 flux, ITO films with different properties are obtained. Both x-ray diffractometer and x-ray photoelectron spectrometer are used to study the change of crystalline structures and bonding structures of ITO films, respectively. Electrical properties are measured by four-point probe measurements. The results indicate that the chemical structures and compositions of ITO films strongly depend on the O2 flux. With increasing O2 flux, ITO films display better crystallization, which could decrease the resistivity of films. On the contrary, ITO films contain less O vacancies with increasing O2 flux, which could worsen the conductive properties of films. Without any heat treatment onto the samples, the resistivity of the ITO film could reach 6.0 × 10^-4 Ω·cm, with the optimal deposition parameter of 0.2 scem O2 flux.     

Effect of Different Substrate Temperature on Sb-Doped ZnO Thin Films Prepared by Pulsed Laser Deposition on Sapphire Substrates

Sb-doped ZnO thin films are deposited on c-plane sapphire substrates by pulsed laser deposition. Hall results indicate that the conductivity of the Sb-doped ZnO thin films is strongly dependent on the substrate temperature. The sample deposited at the temperature of 550°C exhibits p-type conductivity. It gives a resistivity of 15.25Ω＆#12539;cm, with a Hall mobility of 1.79cm2V-1s-1 and a carrier concentration of 2.290×1017cm-3 at room temperature. The x-ray diffraction indicates that the Sb-doped ZnO thin films deposited in the range of 450-650°C are high c-axis oriented. Low-temperature photoluminescence spectra indicate that the sample deposited at 550°C shows the strong acceptor-bound exciton （A0X） emission.     

戴维宁定理在电路分析中的应用

等效电压源定理又叫做戴维宁定理,它可表述为,两端有源网络①可等效于一个电压源,其电动势等于网络的开路端电压,内阻等于从网络两端看除源（将电动势短路）网络的电阻．     

电路短路危害演示器

1设计动机 初中物理电学部分中“短路及其危害”是一个重要但又十分抽象的内容．教材中虽然明确介绍了短路的概念及其危害,但是并没有设计相关演示实验方案．教学中教师也往往因为“该实验不便于演示”,只是简单地进行理论上的推理与分析,师生对其都缺乏感性认识,导致学生学习起来十分困难,学习效果很差．为了解决这个问题,笔者设计了如下演示实验．     

采用较长脉宽双色场获得孤立阿秒脉冲

通过数值求解一维含时薛定谔方程,本文研究了具有较长脉宽双色激光脉冲与氢原子模型相互作用产生的谐波辐射谱.研究发现,当采用12个光学周期的特定组合脉冲时,孤立阿秒脉冲可以实现.这里特定组合脉冲由两束类似频率脉冲(ω,ω+δω)构成,附加脉冲的作用恰是调整基频光电场的形状.不同于入射基频光,整形后的基频光在时间始末端电场振幅被抑制,只有中间部分电场对谐波谱有贡献,它的作用等同于单一6飞秒超短脉冲的效果.从而扩展获得孤立阿秒脉冲所需脉宽从6飞秒到12飞秒.     

基于脉冲耦合神经网络的拉曼光谱定性分析

通过对脉冲耦合神经网络(pulse coupled neural network,PCNN)和拉曼光谱定性分析的研究,提出了基于PCNN的拉曼光谱定性分析方法.首先,利用PCNN神经元的疲劳与不应期特性将拉曼光谱数据进行编码;然后,基于改进的Horspool算法将检测样品对应编码与基码数据库中的所有基码逐一匹配,并得到各对应的匹配相似度,进而判定样品类别.相关实验和数据分析证明了该文方法的准确性和有效性.同时,该文方法避免了目前基于谱模版定性分析方法中待测样品拉曼光谱特征谱峰难以确定以及匹配分析冗余度高等不足,且对存储空间的要求仅为后者的5.8%.     

一类分数阶脉冲微分方程Dirichlet边值问题非平凡解的存在性

研究了一类带有脉冲的分数阶微分方程Dirichlet边值问题非平凡解的存在性.通过利用变分法和Morse理论证明了此分数阶脉冲微分方程至少存在一个非平凡解.