铁氰化镍/银复合无机膜修饰电极对肼的催化氧化作用

在含有Ag+、Ni2+的胶体混合溶液中,多次循环扫描在电极表面形成复合无机膜(Ag/NiCHF),此复合膜修饰电极对肼有显著的催化氧化作用。N2H4的浓度在5.0×10-6～6.0×10-3mol/L范围内与电流呈线性关系,检出限达到1.0×10-6mol/L。该电极已成功的用于水样中肼的测定。     

成膜溶剂对聚4-甲基戊烯-1膜的形态结构和透过行为的影响——Ⅱ.膜的气体透过行为

以聚4－甲基戊烯－1（PMP）为膜材质，分别以环己烷、三氯乙烯、四氯乙烯及环己烷／三氯乙烯为溶剂，研究了这些溶液浇铸膜对O2、N2、H2及CO2等气体的透过行为。结果表明，气体的透过主要发生在PMP的无定形区域，但也在PMP的晶区进行。PMP的Ⅵ型结晶比Ⅰ型结晶具有较低的氧化透过活化能。     

羧酸铜与单螺旋吡啶胺配体自组装的两种新型超分子配合物

Two novel supramolecular complexes [Cu（bpapa）（dhbd）]·CHaOH （1） and [Cu（bpapa）（ma）]·ma （2） （bpapa= bis[6-（2-pyridylamino）pyrid-2-yl]amine, dhbd=2,3-dihydroxybutanedioate dianion, ma=a-methacrylate） were rationally designed, synthesized and characterized by single crystal X-ray diffraction, IR, electronic spectroscopy and thermogravimetric analyses. Complex 1 was the first oligo-a-pyfidylamino complex based on hydroxypolycarboxylate and self-assembled into a 3D honeycomb configuration network with open channels and tubes containing 1D ladder-shaped double chains formed by hydrogen bonds and aromatic π-π stacking interactions. Complex 2 constructed a 2D supramolecular network extended by 1D chains from dimeric supramolecular synthon through noncovalent supramolecular interactions. In the two complexes, the chelating monohelical ligand adopted all-anti configuration. Density functional theory calculations were applied to 1 and 2.     

发光反应型有机铵分子与CdSe纳米晶的组装

用巯基乙酸做稳定剂制备了水溶性CdSe纳米颗粒, 用十六烷基三甲基溴化铵(HTAB)、发光性(4-甲氧基均二苯乙烯基)二甲基乙基溴化铵 (MODAB)及末端含有双键的(4-甲基丙烯酰氧基均二苯乙烯基)二甲基乙基溴化铵(MSDAB)对该CdSe纳米颗粒进行了混合组装.通过改变三种有机分子的比例可以调控所得组装体的溶解性、聚合性及其发光性质.实验结果表明,当HTAB:MODAB:MSDAB=1:5.98～5.90:0.02～0.10(摩尔比)时,所得组装体具有较好的聚合性、溶解性和荧光性质.     

聚全氟乙丙膜电子束引发预辐射接枝AA和SSS制备阳离子交换膜的研究

利用电子束引发预辐射接枝技术,在聚全氟乙丙烯(FEP)薄膜上接枝丙烯酸(AA)和对苯乙烯磺酸钠(SSS),制备一种含羧酸基团和磺酸基团的阳离子交换膜,详细研究了反应温度、单体总浓度、pH值变化、辐照气氛及添加剂对接枝率的影响规律,明确了实验条件与接枝率的对应关系。FTIR测试证明了接枝产物是全氟乙丙烯和丙烯酸、对苯乙烯磺酸钠的接枝共聚物。     

In vivo mechanical study of helical cardiac pacing electrode interacting with canine myocardium

Cardiac pacing is a medical device to help human to overcome arrhythmia and to recover the regular beats of heart. A helical configuration of electrode tip is a new type of cardiac pacing lead distal tip. The helical electrode attaches itself to the desired site of heart by screwing its helical tip into the myocardium. In vivo experiments on anesthetized dogs were carried out to measure the acute interactions between helical electrode and myocardium during screw-in and pull-out processes. These data would be helpful for electrode tip design and electrode/myocardium adherence safety evaluation. They also provide reliability data for clinical site choice of human heart to implant and to fix the pacing lead. A special design of the helical tip using strain gauges is instrumented for the measurement of the screw-in and pull-out forces. We obtained the data of screw-in torques and pull-out forces for five different types of helical electrodes at nine designed sites on ten canine hearts. The results indicate that the screw-in torques increased steplike while the torque–time curves presente saw-tooth fashion. The maximum torque has a range of 0.3–1.9 N mm. Obvious differences are observed for different types of helical tips and for different test sites. Large pull-out forces are frequently obtained at epicardium of left ventricle and right ventricle lateral wall, and the forces obtained at right ventricle apex and outflow tract of right ventricle are normally small. The differences in pull-out forces are dictated by the geometrical configuration of helix and regional structures of heart muscle.     

正交试验优化鸡卵黄膜中含硒蛋白的提取方法

为提高鸡卵黄膜中含硒蛋白的提取率,采用正交试验优化提取方法。将提取时间、提取温度和提取液浓度单因素实验结合正交试验,比较含硒蛋白提取率的变化,并确定最佳提取条件。结果发现,最佳提取条件为提取温度为30℃、NaCl浓度为0.15 mol/L、提取时间为11 h,在此条件下,含硒蛋白的提取率为36.52%,硒含量为0.97μg/L。优化后的方法可用于卵黄膜功能性产品开发。     

Al/AlN多层膜的摩擦磨损性能研究

采用柱状靶磁控溅射系统制备Al/AlN纳米多层膜,采用纳米压痕仪测量Al/AlN纳米多层膜的纳米硬度,在UMT-2M型摩擦磨损试验机上评价其摩擦磨损性能.结果表明:当AlN层较厚时,薄膜在很短时间内被磨穿;调节Al/AlN层厚比为2.9/1.1时,薄膜的摩擦磨损性能明显提高;当保持Al/AlN层厚比为2.9/1.1、变化多层膜的调制周期时,薄膜的摩擦系数较低,但硬度较低的薄膜由于承载能力不够,不能够保持优良的摩擦磨损性能.     

自组装单层保护金纳米团簇的量子化电容充电

本文研究自组装单层保护金纳米团簇(C12Au MPC)在常温下二氯甲烷溶液中的量子化电容充电效应.示差脉冲伏安曲线显示金核平均直径为2.0 nm的C12Au MPC在-0.6~0.6 V电位区间内有9个明显的量子化电容充电峰,其双电层电容总的变化趋势为在零电荷电位附近最小,随着电位正移或负移电容变大.而且随着该金核尺寸的增大,MPC双电层电容值也变大.     

特定结构光催化剂的制备及其构效关系

高效光催化剂的设计是光催化研究的关键.本文介绍了超临界处理、醇解、溶剂蒸发诱导自组装(EISA)法和喷雾干燥技术在特定结构TiO2和非钛催化剂制备中的应用,并初步介绍了光催化剂的构效关系,说明具有特定组成和形貌结构的光催化剂的制备对提高光催化性能起到了关键的作用.