Synthesis,structure and dielectric properties of a novel Gd coordination polymer based on 2-（ pyridin-4-yl ）- 1H-i midazole-4,B -dicarboxylate

A new Gd coordination polymer based on 2-（pyridin-4-yl）-I H-imidazole-4,5-dicarboxylate （H3PIDC） has been synthesized under hydrothermal conditions, formulated as {[Gd3（HPIDC）3（PIDC）（H2O）4].3H2O}n （1）. The compound crystallizes in the monoclinic system, space group C2/c with a=20.951（7）, b = 9.515（3）, c = 27.483（10） A,β= 106.176（6）°, Z = 4, V= 5262（3） A3, C40 H45 Gd3 N12 O30, Dc = 2.071 g/cm3, Mr=1645.63, λ （MoKa）=0.71073A, μ=3.846mm-1, F（000）=3204, the final R=0.0390 and wR= 0.1332. Complex 1 is a two-dimensional MOF built up from T-shaped 3-connected HPIDC2 , PIDC3 and 4-connected metal nodes. Dielectric constant of complex 1 was measured at different frequencies with temperature variation.     

Fabrication of hollow silica microspheres utilizing a hydrothermal approach

Hollow silica microspheres(HSMSs) have been successfully fabricated via a facile hydrothermal route using D-glucose as the sacrificial template and sodium silicate powder as the silica precursor.The resulting silica hollow particles were characterized by scanning electron microscopy(SEM),transmission electron microscopy(TEM),X-ray diffraction(XRD),and infrared spectroscopy(IR).The surface area was determined using the BET method.SEM and TEM images exhibited micro-sized silica hollow particles with a size of ~1.5μm.     

Graphene oxide assisted facile hydrothermal synthesis of LiMn0.6Fe0.4PO4 nanoparticles as cathode material for lithium ion battery

Assisted by graphene oxide（GO）,nano-sized LiMn0.6Fe0.4PO4 with excellent electrochemical performance was prepared by a facile hydrothermal method as cathode material for lithium ion battery.SEM and TEM images indicate that the particle size of LiMn0.6Fe0.4PO4（S2）was about 80 nm in diameter.The discharge capacity of LiMn0.6Fe0.4PO4 nanoparticles was 140.3 mAh-g^1 in the first cycle.It showed that graphene oxide was able to restrict the growth of LiMn0.6Fe0.4PO4 and it in situ reduction of GO could improve the electrical conductivity of LiMn0.6Fe0.4PO4 material.     

Synthesis,Structure and Magnetic Property of One Ni~Ⅱ Based Coordination Polymer

One new coordination polymer, [Ni(m-bix)(m-BDC)](1, m-bix = 1,3-bis(imidazol-1-ylmethyl)benzene, m-BDC = 1,3-benzenedicarboxylic acids), has been hydrothermally synthesized and structurally characterized by elemental analysis, IR, TGA and X-ray single-crystal diffraction. The green block crystal of complex 1(C22H18N4Ni O4) belongs to monoclinic system, space group P21/c with a = 10.0418(3), b = 23.8651(6), c = 8.7872(2) A, β = 112.333(3)o, V = 1947.88(9)A3, Z = 4, Dc = 1.572 g/cm3, Mr = 461.11, F(000) = 952, R = 0.0335 and w R = 0.0683 for 2827 observed reflections(I 2σ(I)). Complex 1 exhibits a novel 6-connected 3D sxd type topological framework. The magnetic characterization of complex 1 shows antiferromagnetic coupling exchange.     

Synthesis and Crystal Structure of a New Pr(Ⅲ)–K(Ⅰ) Heterometallic Oxalate Coordination Polymer

A new 3D heterometallic coordination polymer, namely [K2Pr2(C2O4)4·H2O]n(1), has been successfully synthesized under hydrothermal conditions. X-ray single-crystal diffraction determination reveals that 1 crystallizes in monoclinic system, space group P21/n with a = 12.060(4), b = 8.493(3), c = 15.776(5)(A), β = 93.235(3)°, V = 1613.4(9) 3, Z = 4, Mr = 730.12, Dc = 3.006 Mg/m3, μ = 6.581 mm-1, F(000) = 1368, the final R = 0.0283 and w R = 0.0866 for 2939 observed reflections with I 2σ(I). Complex 1 features an unusual 3D heterometallic coordination framework, in which oxalates exhibit three different coordination behaviours. Moreover, powder X-ray diffraction and thermal properties for 1 have also been investigated.     

Hydrothermal Synthesis and Structural Characterization of a Novel 3-D Open Framework Zinc Phosphate Microporous Compound(C_5N_2H_(14))·[Zn_3(OH_2)(PO_4)_2(HPO_4)]

One novel organically templated zincophophate(C5N2H14)·[Zn3(OH2)(PO4)2(HPO4)] has been synthesized under hydrothermal conditions and characterized by single-crystal X-ray diffraction together with elemental analysis, infrared spectroscopy, thermogravimetric analysis, and powder X-ray diffraction. The title compound crystallizes in the monoclinic space group P21/n, with a = 9.7904(11), b = 14.0287(14), c = 11.8651(13) , β = 104.690(3), V = 1576.4(3) 3, Z = 4, T = 296(2) K, Mr = 601.31 and Dc = 2.533 g/cm3. The compound consists of a macroanionic [Zn3(OH2)(PO4)2(HPO4)]2- framework and(C5N2H14)2+ cations, and its structure is built up from ZnO3(OH2), ZnO4, HPO4 and PO4 tetrahedral units that result in 4, 8 and 10-ring channels.     

Investigation of Hydrolysis in Poly（ethylene terephthalate） by FTIR-ATR

The hydrothermal aging of poly(ethylene terephthalate)(PET) was investigated at 70 95 °C. A new method to investigate the hydrolysis degree of PET by Fourier transform infrared spectroscopy(FTIR) was proposed. The spectra during the hydrothermal aging were measured using attenuated total reflection accessory(ATR). Peak resolving of carbonyl regions was performed, and the ratio of two groups of bands representing carboxylic acids and esters respectively were calculated to show the hydrolysis degree of ester groups in PET. The acid/ester ratio shows exactly the same trend as the average chain scission number per unit mass at various temperatures and thus can be used as a parameter to characterize the hydrolysis and random chain scission of PET. This method related to the hydrolysis mechanism directly, is simple, fast and convenient compared to the traditional methods such as viscometry, end-group titration and size exclusion chromatography(SEC). It may also be useful in hydrolysis characterization of other polyesters.     

铜树枝晶的水热合成以及结构表征和抗菌性能评价(英文)

在乙醇胺-水混合溶液中采用水热处理硫酸铜的方法制备了多结构的铜树枝晶;采用X射线粉末衍射仪、扫描电子显微镜、透射电子显微镜分析了所得样品的结构和形貌;采用牛津杯法评价了其对金黄葡萄球菌、枯草芽孢杆菌、大肠杆菌和绿脓杆菌的抗菌性能.结果表明,铜树枝晶由一个长的一级中心主干和许多高度对称分布在主干两侧的二级分支结构构成,且形貌均匀;反应温度、反应时间以及溶剂组成对铜树枝晶的形貌有很大影响.与此同时,铜树枝晶表现出选择性的抗菌行为,对金黄葡萄球菌、枯草芽孢杆菌和绿脓杆菌更有效.     

基于对苯二甲酸配体的含二维铅无机层的三维无机-有机杂化材料的合成及晶体结构(英文)

以对苯二甲酸作为配体,利用水热法合成了含二维(2D)铅无机层的三维(3D)无机-有机杂化材料[Pb2Cl(1,4-BDC)1.5]n(1);利用红外光谱、电感耦合等离子体原子发射光谱、X-射线衍射表征了产物的结构,利用热重分析测定了其热稳定性.结果表明,[Pb2Cl(1,4-BDC)1.5]n属于单斜晶系,P21/c空间群,其晶格参数为:a=0.599 000(10)nm,b=1.185 29(2)nm,c=1.847 37(3)nm,β=91.778 0(10)°,V=1.310 98(4)nm3,Z=4,R1=0.032 0,wR2=0.089 4,Rint=0.043 6.就化合物1的分子结构而言,由Pb—X—Pb(X=O或Cl)链接形成的2D无机层通过对苯二甲酸配体连接,构筑成具有3D骨架的无机-有机杂化材料.     

SAPO-5分子筛的可控合成及晶化过程探索

在非醋酸体系下分别通过动态和静态水热晶化方法合成了SAPO-5分子筛, 并考察了转速、 晶化时间及凝胶体系水硅比对SAPO-5分子筛晶相及形貌的影响, 采用X射线衍射(XRD)和扫描电子显微镜(SEM)技术研究了静态、 动态水热条件下SAPO-5分子筛的晶化过程. 结果表明, 静态水热条件下晶化6 h得到的SAPO-5分子筛为球状、 六边形柱状聚集晶体; 而在20 r/min转速下晶化2和6 h得到的SAPO-5分子筛分别为分散的凹面柱状晶体(凹面直径约6~8 μm)及均一分散的球状晶体(直径为16 μm); 在60 r/min转速下晶化3 h即可得到高度分散的六边形柱状晶体(六边形直径约5~8 μm); 提高转速至100和140 r/min时仅需晶化1 h即可得到六边形柱状晶体. 通过考察体系水硅比(H₂O/Si摩尔比)的影响, 确定最佳的水硅比为70, 此条件下所得晶相为纯相且分子筛的分散度最好. 综上可知, 相较于静态晶化, 动态晶化不仅从形貌上改善了晶体的分散度, 通过缩短晶化时间、 降低晶化转速也提高了SAPO-5分子筛的晶化效率. 本文采用较小的水硅比(H₂O/Si摩尔比为70)、 较低的模板剂用量在非醋酸体系下合成了SAPO-5分子筛, 为SAPO-5分子筛的合成提供了一条更简单、 经济的路线.