Coupling of Acoustical Plane p-Wave to a Cased Borehole

Theoretical and numerical study on the coupling acoustic field of the plane p-wave to a cased borehole is carried out. The medium outside the cased borehole is modeled as the porous medium. The scattering field characteristics in the cased borehole are investigated when a plane fast p-wave is incident in tilt to the cased borehole from the porous medium. The scattering fields inside and outside the cased borehole are analyzed and deduced by Biot＇s theory under the boundary conditions on each interface, and they are numerically studied. It is found that the scattering field has strong resonant characteristics and there exists a series of resonant frequencies and peaks. The effects of the frequency, radii of each interface, incident angle, porosity, and other parameters on the resonant acoustic field have been investigated in detail in the fast and slow formations respectively. The resonant characteristics of the scattering field are also analyzed from the physical sense.     

堆积床内甲烷/空气预混燃烧的理论分析

在多孔介质内组织预混燃烧,燃气与多孔介质有强烈的换热作用,燃烧过程伴随着化学反应和热输运的强烈耦合。本文以惰性氧化铝球堆积床内的甲烷/空气预混燃烧为例,提出解析模型,对燃烧过程进行理论分析,给出温度分布的解析解,发现了超绝热火焰温度燃烧现象。     

基于神经网络的模板匹配方法求正常星系红移

星系通常分为正常星系(NG)与活动星系(AG)两类。文章提出了一种自动获取NG红移的快速有效方法: (1) 由NG模板根据红移范围Ⅰ: 0.0～0.3与Ⅱ: 0.3～0.5模拟得到两类星系样本, 进行PCA变换获得样本特征向量; (2) 利用概率神经网络设计两类样本特征向量的Bayes分类器; (3) 对于实际NG光谱数据, 利用Bayes分类器进行分类确定其红移的范围, 然后在此范围内进行模板匹配得到红移的准确值。与在整个红移范围内的模板匹配方法相比, 此方法不但节省了50%的模板匹配运算量, 而且还大大提高了红移值测量的精度。文章研究结果对于大型光谱巡天所产生的海量数据的自动处理具有重要意义。     

多孔硅在30~180℃温区光致发光谱的研究

对长期存放在空气中的多孔硅样品和即时制备的多孔硅样品分别在室温~180℃下进行了光致发光（PL）温度效应的研究.两类样品的PL呈现不同的变化规律.前者的PL还表现为双峰,且长波PL峰随温度升高蓝移;后者的PL表现为单峰,且PL峰位随温度升高红移.基于量子限制效应对后者进行了解释;而前者难以用分立的量子限制和表面发光中心模型来解释,实验结果表明两种机制之间可能有较复杂的耦合效应发生.     

三维有序二氧化锰大孔材料的模板技术合成及表征

以单分散SiO2 胶态晶体球形成的三维有序结构为模板 ,利用胶体晶模板技术合成了三维长程有序的二氧化锰大孔材料 .通过X射线粉末衍射 (XRD)和扫描电子显微镜 (SEM)对产物进行了表征 .其中XRD数据显示所得产物为纯四方相二氧化锰 .SEM结果表明 ,所合成的二氧化锰大孔材料孔大小均匀 ,空间排列高度有序 ,很好地复制了SiO2 胶态晶体球的自组装方式 .此外 ,对三维有序二氧化锰大孔材料的合成过程进行了分析 ,研究了前体填充次数对产物孔结构的完整性和有序性的影响 ,还发现产物孔径的收缩存在异常现象 .     

非均匀孔隙内加热丝上的沸腾核化现象

本文利用可视化实验台对非均匀孔隙内加热铂丝上的沸腾核化和气泡动力学特性进行可视化观测,分类整理和对比分析了不同条件下的实验现象。实验表明,非均匀孔隙内加热丝上的沸腾核化具有空间区域性,气泡动力学特性包括界面传递、干涸与湿润过程在不同特征区域,如角缝区、稀疏区和密集区呈现出各自特征。     

Using Digital Imaging to Characterize Threshold Dynamic Parameters in Porous Media Based on Lattice Boltzmann Method

Digital images (DI) and lattice Boltzmann method (LBM) are used to characterize the threshold dynamic parameters of porous media. Two-dimensional representations of the porous structure are reconstructed from segmentation of digital images obtained from a series of tiny samples. The threshold pressure gradients and threshold Péclet numbers are researched on seven test samples by using LBM. Numerical results are in agreement with that obtained by integrating Darcy’s law. The results also indicate that fluids can flow through porous media only if the fluid force is large enough to overcome threshold pressure gradient in porous media. One synthetic case is used to further illustrate the applicability of the proposed technique. In addition, the dynamical rules in our model are local, therefore it can be run on parallel computers with well computational efficiency.     

Experimental Study of Capillary Effect in Porous Silicon Using Micro-Raman Spectroscopy and X-Ray Diffraction

We investigate the capillary effect and the residual stress evolution in the wetting, drying and rewetting stages of porous silicon using x-ray diffraction and micro-Raman spectroscopy. A reversible capillary effect and an irreversible oxidation effect are the driving forces for the residual stress evolution. The lattice expansion of the porous-silicon layer is observed to decrease slightly by x-ray diffraction and the tensile residual stress increases rapidly by micro-Raman spectroscopy, with the change of about 82 MPa for the oxidation effect and the change of 2.78 GPa (enough for cracking) for the capillary effect. Therefore, the capillary effect plays a major role in the residual stress evolution in the stages. A simple microscopic liquid-bridge model is introduced to explain the capillary effect and its reversibility. The capillary emergence has a close relation with a great deal of the micro-pore structure of porous silicon.     

Lattice Boltzmann方法模拟多孔介质Klinkenberg效应

格子Boltzmann数值模拟方法是研究复杂的多孔介质结构特别是Klinkenberg效应的有效方法之一，对处理复杂边值问题尤其有效，用格子Boltzmann方法研究了气流穿越多孔介质问题，并将数值计算结果与实验结果进行了比较，结果表明格子Boltzmann方法是数值模拟气流穿越多孔介质问题的有效方法之一。     

二次阳极氧化方法制备有序多孔氧化铝膜

通过二次阳极氧化方法制备多孔氧化铝膜与一次阳极氧化方法制备多孔氧化铝膜孔排布规律性的对比 ,结果发现 ,二次阳极氧化方法制取的多孔氧化铝膜孔排布规律性明显好于一次阳极氧化法制取的多孔膜 .在几个微米范围内 ,孔呈理想的六角排布 .去除一次阳极氧化膜后 ,二次阳极氧化得以在更良好的表面进行 ,制取的氧化铝膜孔规律性和有序度更高 .有序区域的尺寸与晶粒内的亚晶大小有一定关系