1+1/2对转涡轮叶排轴向间距对性能影响的研究

木文对1+1/2对转涡轮中轴向间距影响进行了初步研究。对不同轴向间距叶栅流场进行了大量时间精确模拟。研究表明,1+1/2对转涡轮高低压转叶间轴向间距成为追求高效率的制约因素,轴向间距为高压转叶喉部宽度是关键点。因此有关小轴向间距下强激波/叶排干扰的研究应该加强。     

一种新型可调谐锁模光纤激光器

利用法布里-珀罗腔的激光二极管作为调制器件，实现环形腔光纤激光器的主动锁模。并利用法布里-珀罗腔的激光二极管的多纵模特性，把激光二极管当作一梳状滤波器，通过偏振控制器来调整入射到激光二极管内光的偏振态，同时均衡腔内增益，得到波长大范围可调谐的锁模激光，其脉冲宽度约为48ps，脉冲重复速率2GHz。     

轴流风扇叶片端导叶作用的研究

本文采用数值方法研究了叶片端导叶对轴流风扇性能的影响。通过与普通开式轴流风扇比较,分析了叶片端导叶对内部流动作用的机理.数值计算结果表明:叶片端导叶的安装位置将影响轴流风扇气动效率,安装叶片端导叶不能提高风扇静压升,但是在压力面安装时能有效地减小风扇叶顶泄漏流与主流的掺混损失;在设计流量下,压力面安装叶片端导叶使泄漏涡的作用范围较小,涡核更靠近吸力面;吸力面安装叶片端导叶弱化了泄漏涡的强度但没有减小泄漏涡的作用范围。     

基于旋转描述的三维几何造型方法

提出了一种能用凸四边形表示并可作平面展开的三维实体造型的设计方法。该方法用旋转描述表把二维平面展开图和三维实体联系起来，模拟人工折叠过程，由二维平面展开图逐次旋转变换完成三维造型重建。造型重建后，再通过纹理映射将平面设计图案映射到实体的各个面上，完成对实体着色渲染，生成具有真实感的三维实体。     

一类NLS-mKdV方程族的扩展可积系统

利用代数变换，构造了与文献［５］中的loop代数₂的子代数等价的loop代数1的一个子 代数₁.再将₁扩展为一个高维的loop代数.利用设计了一个等谱问题 ，结合子代数间的直 和运算和同构关系，得到了NLS_mKdV方程族的一类扩展可积系统.作为约化情形，求得了著 名的Schrdinger方程与mKdV方程的可积耦合系统. 关键词： loop代数 可积系统 等谱问题     

Experimental Study of Effect of Medium Boundary on Light Distribution in Tissue Phantoms

An experimental method for investigating the effect of medium boundary on distributions of light in the biological tissue phantom intralipid is presented. Measurements of distributions of light in intralipid-10% suspensions at 633 nm are described, in which a narrow collimated beam is incident on the surface of the phantoms and into the different depths inside of the phantoms. The experimental results show that the effect of the boundary of the medium on the curves geometry of light distributions is trivial, but the effect on intensity of scattering light is obvious, the maximal relative change of the energy fluence reaches 53.8% and the position of the peak of the energy fluence curve has a shift of 1.1 mm in the reverse direction of incident light for the phantom with albedo a=0.998, and the effect of the boundary is decreased with the increase of the absorption coefficients of tissue phantoms. The experimental results were analysed by the diffusion theory. These studies will be helpful for further understandings of the relation between the boundary of biological tissue and the distribution of light in tissue.     

(δ,ψ)-等距的稳定性

本文讨论了Banach空间之间非满射、非线性的弱等距逼近问题.在某些条件假设下,对(δ,ψ)-等距算子的稳定性给出了一些肯定的结果,从而修正并推广了文[1-4]中的一些结果.     

A modal analysis for the acoustic radiation problems, Ⅱ. Examples

The acoustic radiation modes and the field distribution modes describe the radiation patterns of a complex vibrating surface and the field distribution patterns respectively. The physical meanings of the acoustic radiation modes and the field distribution modes are revealed by numerical method. For a sphere body, a spinning body and a rectangular body, the geometrical patterns of the acoustic radiation modes and the field distribution modes are given. The radiation mode 1 represents the radiation behavior of a monopole radiator, the radiation modes 2 through 4 represent the radiation behavior of dipole radiators respectively, and the radiation modes 5 through 9 represent the radiation behavior of quadrapole radiators respectively. The acoustic radiation modes and the field distribution modes introduce the multi-pole decomposition method into discussion of the acoustic radiation problems.     

A New High Efficiency Multiwave Cerenkov Generator Operating at Low Magnetic Field

With a resonant cavity inserted between the second slow-wave-structure section and the tapered wavegulde, a new structure of the multlwave Cerenkov generator (MWCG) operating at low guiding magnetic field is proposed to produce high efficiency and high power microwave. Some features and potential advantages of the proposed device are analysed. The 2.5-dimensional partlcle-in-cell simulation is employed to verify the initial expectation.The results show that, with the use of an electron beam of 640keV and 8.4kA guided by the magnetic lield of 0.6 T, a stable and monochromatic X-band microwave output of 4 GW in peak power is achieved, and the average efficiency is over 30%.