Photoswitching of an alcohol-sensitive photochromic diarylethene

The closed-ring isomer of diarylethene 1a, 1-(2-methyl-5-(4-N,N-diethylaminophenyl)thien-3-yl)-2-(2-methyl-5-phenylthien-3-yl)perfluorocyclopentene was found to cause the substitution reaction with primary alcohols at room temperature. The open-ring isomer 1a was stable in the alcohols. The product obtained in methanol was isolated by HPLC, and the structure was identified by ¹H NMR, mass spectrometry, and X-ray crystallographic analysis. It was revealed that two fluorine atoms were replaced with methoxy groups. The substitution reaction was also caused with ethylene glycol to form the five-membered ring. Both the products also showed photochromism, and had absorption maxima and photocycloreversion quantum yields different from those of 1a.     

Synthesis and photophysics of an octathioglycosylated zinc(II) phthalocyanine

A water soluble zinc(II) phthalocyanine symmetrically appended with eight thioglucose units was synthesized from commercially available hexadecafluorophthalocyaninatozinc(II) by controlled nucleophilic substitution of the peripheral fluoro groups. The photophysical properties and cancer cell uptake studies of this nonhydrolysable thioglycosylated phthalocyanine are reported. The new compound has amphiphilic character, is chemically stable, and can potentially be used as a photosensitizer in photodynamic therapy.     

香荆芥酚的荧光光谱和吸收光谱研究

研究了中药活性成分香荆芥酚(Carvacrol)的荧光光谱和吸收光谱,依据光谱数据测量了香荆芥酚的电离常数和荧光量子产率.在pH＜2.0时,香荆芥酚的荧光随溶液pH增大而增强;在pH2.0～8.0范围内,香荆芥酚有稳定的强荧光,最大激发波长为278 nm,最大发射波长为306 nm; pH＞8.0时荧光强度随pH的增大...     

指数掺杂结构对透射式GaAs光电阴极量子效率的影响研究

通过在一维连续性方程光电子产生函数项中加入短波约束因子,修正了指数掺杂和均匀掺杂透射式GaAs光电阴极量子效率公式.利用修正的透射式阴极量子效率公式分别拟合制备的指数掺杂和均匀掺杂透射式阴极量子效率实验曲线,符合得很好.另外拟合得到的阴极性能参数表明,由于内建电场的作用,指数掺杂阴极的性能要好于均匀掺杂阴极,指数掺杂结构能够明显提高透射式阴极的量子效率. 关键词： 透射式光电阴极 指数掺杂 量子效率 内建电场     

Fe、Co组成对Cu-Fe-Co基混合醇催化剂合成性能的影响

采用共浸渍法制备了一系列不同Fe、Co组成的Cu-Fe-Co基混合醇催化剂,对其CO加氢合成混合醇反应性能进行了考察,并采用BET比表面积分析、X射线衍射（XRD）、X射线光电子能谱（XPS）、场发射扫描电子显微镜（FE-SEM）及H₂程序升温还原（H₂-TPR）等手段对其进行了表征.结果表明:Cu-Fe二元催化剂添加适量的Co可以明显提高催化剂醇的明空收率（STY）、CO转化率,而总醇选择性不变.当活性组分Cu、Fe及助剂Co的质量分数分别为25%、22%、3%时,催化剂醇的时空收率高达205.6 g·kg^-1·h^-1,CO转化率为56.6%.XRD、XPS和TPR结果表明:在Cu组分含量不变时,少量Co组分的引入使催化剂表面形成微量的CuFe₂O₄相,促进了Cu-Fe组分间相互作用的增强,改善了催化剂活性组分的分散度,有利于提高催化剂活性及醇的时空收率;随Co含量的增大,催化剂中金属组分间的相互作用发生转变,形成了Cu-Co尖晶石相,导致催化剂的醇选择性有所下降.     

压缩-剪切复合应力下PMMA材料的静态力学特性研究

通过压缩具有一定倾斜角(0°,10°,15°,20°和25°)试件和双剪切模型试件,实现了单轴压缩、压缩-剪切复合应力以及纯剪切三种应力状态,得到PMMA(聚甲基丙烯酸甲酯)在相应应力状态下的应力-应变曲线,同时对不同应力状态下试件的破坏模式进行了分析。结果表明:在不同受力环境中材料的强度和破坏的机理不同;同单轴压缩状态下相比,材料在压缩-剪切复合应力状态下屈服极限、强度极限以及破坏应变均不同程度的增大,呈现明显的"剪切增强"现象。单轴压缩与压缩-剪切应力状态下试件的破坏模式均为在试件短对角面上出现明显的剪切屈服带,由应力分析得出试件剪应力在短对角面上达到最大,引起在此平面上分子链间滑动从而产生应变软化形成剪切屈服带;双剪切试件的破坏模式为与剪切面呈45°的斜面。     

����ֲڶȶ�������������ٲ��Ͻ����Ӱ��

依据钨材料表面溅射的实验现象,建立钨材料表面粗糙模型,模拟了高能H+、He+粒子辐照下的钨材料表面的溅射行为过程,并与基于离子输运的双群模型计算得到的结果作了比较。结果表明,随着钨材料表面粗糙程度的增加,溅射率降低;对一定的粗糙表面,相同能量的不同入射粒子,质量越大粒子溅射率越高,这些结果为分析聚变装置中心等离子体杂质水平和评价偏滤器寿命等提供了一定的理论支撑。     

A blue-green-emitting 3D supramolecular compound: synthesis,crystal structure and effect of solvents and temperature on the luminescent properties

A blue-green-emitting three-dimensional supramolecular compound (C₁₀O₂N₂H₈)(C₉O₇H₆) (1) was synthesised under hydrothermal conditions and structurally characterised by elemental analysis, IR spectrum, ¹H NMR and single-crystal X-ray diffraction. The crystal belongs to triclinic system with P 1¯ space group. The crystal structure is stabilised by O–H…O, O–H…N hydrogen bonds and π–π interactions (π–π stacking distance is 3.282 Å). Compound 1 exhibits intense green luminescence in solid state at 298 K (λ_em = 546 nm). In addition, absorption and fluorescence characteristics of compound 1 have been investigated in different solvents (DMSO, CH₃CN and CH₃OH). The results show that compound 1 exhibits a large red shift in both absorption and emission spectra as solvent polarity increases (polarity: DMSO>CH₃CN>CH₃OH), indicating a change in dipole moment of compound 1 upon excitation. Although the emission spectra of compound 1 in CH₃OH are close to it in dimethyl sulfoxide (DMSO), it is revealed that the luminescence behaviour of compound 1 depends not only on the polarity of environment but also on the hydrogen bonding properties of the solvent. Meanwhile, temperature strongly affects the emission spectra of compound 1. Emission peaks of compound 1 were blue shift at 77 K than those at 298 K in both solid state (ca. 142 nm) and solution (ca. 6–23 nm), which was due to the non-radiative transition decreases at low temperature. Moreover, the quantum yield and fluorescence lifetime of compound 1 were also measured, which increased with increasing polarity of solvent, lifetime in DMSO at 298 K (τ₁ = 0.92 μs, τ₂ = 8.71 μs) was the longest one in solvents (298 K: τ₁ = 0.87–0.92 μs, τ₂ = 7.50–8.71 μs; 77 K: τ₁ = 0.72–0.90 μs, τ₂ = 6.88–7.45 μs), which was also shorter than that in solid state (298 K: τ₁ = 1.13 μs, τ₂ = 7.50 μs; 77 K: τ₁ = 0.97 μs, τ₂ = 8.97 μs). This was probably because of the weak polarity environment of compound 1 in solid state.     

Secondary electron emission yield from vertical graphene nanosheets by helicon plasma deposition

The secondary electron emission yields of materials depend on the geometries of their surface structures.In this paper,a method of depositing vertical graphene nanosheet(VGN)on the surface of the material is proposed,and the secondary electron emission(SEE)characteristics for the VGN structure are studied.The COMSOL simulation and the scanning electron microscope(SEM)image analysis are carried out to study the secondary electron yield(SEY).The effect of aspect ratio and packing density of VGN on SEY under normal incident condition are studied.The results show that the VGN structure has a good effect on suppressing SEE.     

Functionality of novel black silicon based nanostructured surfaces studied by TOF SIMS

A functionality of the novel black silicon based nanostructured surfaces (BS 2) with different metal surface modifications was tested by time-of-flight secondary ion mass spectrometry (TOF SIMS). Mainly two surface functions were studied: analytical signal enhancement and analyte pre-ionization effect in SIMS due to nanostructure type and the assistance of the noble metal surface coating (Ag or Au) for secondary ion formation. As a testing analyte a Rhodamine 6G was applied. Bi⁺ has been used as SIMS primary ions. It was found out that SIMS signal enhancement of the analyte significantly depends on Ag layer thickness and measured ion mode (negative, positive). The best SIMS signal enhancement was obtained at BS2 surface coated with 400 nm of Ag layer. SIMS fragmentation schemes were developed for a model analyte deposited onto a silver and gold surface. Significant differences in pre-ionization effects can play an important role in the SIMS analysis due to identification and spectra interpretation.