反应介质对溶剂热法合成CuS晶体的影响

以氯化铜、硫脲为反应物,通过溶剂热法合成了具有不同形貌的微纳米分级结构CuS晶体,研究了不同反应介质对材料的形貌、晶体结构以及反应产量等的影响。结果表明,以N,N-二甲基甲酰胺（DMF）为溶剂,可以得到微米级六角花状CuS晶体,以乙二醇或者水/DMF混合物为溶剂,得到的CuS晶体为微米球花状,CuS晶体的产量随着溶剂中水所占比例的增大,呈现先上升后下降的结果,当V_DMF：V_H2O=1：1时得到CuS的最大产量,为理论产量的64.5%。当V_DMF：V_H2O=2：1时得到的CuS晶体具有良好的光催化活性,能够在氙灯模拟的自然光照射2.5 h以内使罗丹明B污染物溶液的脱色率达到96.7%。     

SYNTHESIS AND THERMAL PROPERTIES OF POLYBENZOXAZOLE FROM SOLUBLE PRECURSOR WITH HYDROXY-SUBSTITUTED POLYENAMINONITRILE

Aromatic polybenzoxazole (PBO) precursor, hydroxy-substituted polyenaminonitrile, was prepared by direct polycondensation of 1,4-bis(l-chloro-2,2-dicyanovinyl)benzene (CCB) and 4,6-diaminoresorcinol dihydrochloride (DAR) using pyridine and N,N-dimethylacetamide as condensing agent and solvent. The precursor has good solubility in polar aprotic solvent which is due to the strong dipolar nature of the main chain. The soluble precursor was subjected to thermal cyclization in an inert atmosphere to convert it into the corresponding PBO, which has its 5% weight loss temperature at 540℃ The fully cyclized PBO were characterized by FT-IR and TGA. The introduction of 10% mol 1,3,5-benzenetricarboxylic chloride (BTC) into the main chain not only has little effect on the solubility of PBO precursor but also raises its 5% weight loss temperature to 552℃ and char yield at 700℃ for the cyclized PBO with BTC.     

POLYMERIZATION OF A NEW SUBSTITUTED ACETYLENE BEARING A FURAN RING WITH PALLADIUM ACETYLIDE CATALYSTS

A substituted polyacetylene bearing a furan ring, poly(2-propynyl 2-furoate) (PPF), was synthesized for the first time with palladium acetylide complex catalysts in CHCl3 at 60℃ to give a soluble and stable polymer with a yield of ca.75%. Some features for polymerization of 2-propynyl 2-furoate are described and discussed. The resulting polymer was characterized by IR, GPC and ^1H-NMR analysis.     

偶氮型光致变色液晶树状大分子的量子产率、异构转化率和活化能研究

研究了化合物端基含36个己氧基偶氮苯介晶基元的二代(G2)光致变色液晶树状大分子在氯仿及四氢呋喃溶液中的量子产率、吸收光强Ia、活化能E、异构转化率A/A0、热回复异构化速率常数kH及其反/顺异构体组分比A′/A′0,并与一代光致变色液晶碳硅烷树状大分子(G1)及介晶基元化合物(M3)的光化学行为进行了比较.在氯仿及四氢呋喃溶液中的量子产率的顺序均为M3>G1>G2,吸收光强Ia在氯仿及四氢呋喃溶液中的顺序分别为G2>G1>M3(氯仿)和M3>G1>G2(四氢呋喃),在氯仿及四氢呋喃溶液中活化能的顺序均为M3>G2>G1,在氯仿及四氢呋喃溶液中热回复异构化速率常数kH的顺序均为G1>G2>M3,在热回复异构化反应中的反/顺异构体组分比A′/A0′在氯仿及四氢呋喃溶液中的顺序均为G2>G1>M3.     

伞形花内酯的荧光量子产率与电离常数

研究了伞形花内酯在不同酸度下的荧光光谱,测量了荧光量子产率和电离常数。伞形花内酯有2种荧光型体,分别存在于弱酸性和弱碱性溶液中。在pH 3～6的溶液中,伞形花内酯以中性分子型体存在,最大激发波长λex=325nm,最大发射波长λem=455nm;在pH 9～10.5的溶液中,伞形花内酯主要以阴离子型体存在,λex/λe...     

Exploration for electronic transitions and photodissociation mechanism of hydrogen iodide

The electronic transitions and excited-state fragmentation of hydrogen iodide have been studied within the A-band continuum. The extinction intensity for the excitations from the ground to the low-lying electronic states are derived by performing the wave packet simulations of nuclear dynamics in this study. The quantum yields of the spin-excited I* product at the different photon energies are determined as well. The results suggest that the possibility of intersystem crossing can be neglected. Employing the time-dependent density functional theory (TDDFT), the four highest occupied and the two lowest unoccupied orbitals of hydrogen iodide have been analyzed, and the transition to the state is found to be most probable in the first absorption band.     

各向异性本构关系在板料成形数值模拟中的应用

对几种能表达面内各向异性的屈服准则Hill、Barlat-Lian、Barlat进行了比较。以弹性变形服从各向同性广义虎克定律的情况下，给出了基于张量算法推导的弹塑性本构关系的一般表达式，并由此导出了相应屈服准则的弹塑性本构关系的显式表达。借助ABAQUS软件本构模块用户子程序接口，分别实现了这些屈服准则在ABAQUS的嵌入。以模拟方形盒的拉延过程为例，分析了不同的屈服准则在板料成形过程数值模拟中的应用。模拟结果表明，基于弹塑性本构关系一般表达所列出的相应屈服准则的显式表达式是正确的；在采用壳元来模拟板料成形时，采用Barlat准则的模拟结果和采用Barlat-Lian准则的结果差别不大。     

Upper bound limit analysis of active earth pressure with different fracture surface and nonlinear yield criterion

Conventional calculations of static and seismic active earth pressures of soils on a retaining wall are formulated assuming the soils obeying a linear Mohr–Coulomb yield criterion. However, experimental evidences show that the strength envelopes of almost all geomaterials are nonlinear in nature over a wide range of normal stresses. In this paper, the strength envelope of the backfill behind a retaining wall is considered to follow a nonlinear yield criterion. A simple method is proposed for calculating the static and seismic active earth pressures acting against a retaining wall using a nonlinear yield criterion. This method is based on the upper bound theorem of limit analysis. Both translational and rotational fracture surfaces are employed in the formulation for calculating active earth pressures. Quasi-static representation of earthquake effects using a seismic coefficient concept is adopted for seismic active earth pressure calculations. Instead of using directly the actual nonlinear yield criterion, a linear Mohr–Coulomb yield criterion, which is tangential to the nonlinear yield criterion, is used to formulate the active earth pressure problem as a classical nonlinear programming problem. A nonlinear sequential quadratic programming algorithm is used to search for the maximum solution. In order to assess the validity of the proposed method, values of active earth pressures for different values of seismic coefficients and nonlinear parameters in the yield criterion are calculated and compared with solutions obtained using an extended Rankine’s active earth pressure theory. For the case of static active earth pressure, the upper bound solutions using the present method with a translational fracture surface are equal to the extended Rankine’s theoretical solutions and are slightly smaller than those obtained using the present method with a rotational fracture surface. For the case of seismic active earth pressure, numerical results obtained using the present method with a rotational fracture surface is very close to the extended Rankine’s theoretical solutions. A study is conducted to investigate the effects of the parameters in the nonlinear yield criterion on the active earth pressures.     

HTPB复合底排药压缩屈服应力模型研究

目前广泛应用于底排增程技术的 HTPB 复合底排药 (composite base bleed grain,CBBG) 是一种颗粒填充含能材料,战场环境中将承受冲击、温度等载荷作用. 为研究 HTPB CBBG 冲击压缩力学性能,进行了不同温度 (233$\sim$323 K) 和应变率 (1100$\sim$7900 s$^{-1}$) 下的分离式霍普金森压杆实验. 实验结果表明,各工况下,应力应变曲线均呈现屈服-$\!$-应变硬化特征,HTPB CBBG 保持高韧性. 提高应变率和降低温度均导致相同应变下的应力幅值上升,但温度较应变率对HTPB CBBG 冲击压缩力学性能的影响更为显著. 基于所研究温度范围高于 HTPB CBBG 玻璃化转变温度,通过将水平、垂直移位因子与温度的关系表示为 WLF 方程的形式,将时温等效原理引入协同模型,并计及内应力的应变率增强效应,提出了一种新的屈服应力模型.选取参考温度,利用水平、垂直移位因子-$\!$-温度曲线和屈服应力主曲线拟合模型参数.模型预测值与实验数据对比结果表明:该模型可准确表征 233$\sim$323 K 时 HTPB CBBG 屈服应力的双线性应变率相关性,明确了较低和较高应变率时,应变率效应分别主要由内应力和驱动力贡献.      

广义双剪应力准则角隅模型

本文将广义双剪应力准则变换为π平面和静水应力轴的柱坐标方程,然后将其角隅光滑化,得到了新的光滑、外凸的广义双剪应力准则角隅模型,研究结果表明,近年来作为光滑化Mohr-Coulomb理论提出的各种角隅模型,实际上并不是光滑化的Mohr-Coulomb理论,而是光滑化的广义双剪应力理论。