10-甲基吖啶苯酚酯衍生物的合成、表征及化学发光特性

吖啶-9-羧酸苯酚酯是一类效率较高的化学发光试剂.其结构一般有两部分组成,吖啶环发光部分和9-羧酸苯酚酯离去基团.本文对离去基团进行修饰,分别在离去基团苯酚部分的2,5或2,6位引入取代基CF₃、NO₂、Br、CH₃,合成了4个新吖啶酯衍生物,并对它们的分子结构进行了表征.4个新化合物和模型化合物(无取代基)比较,均表现出较好的化学发光效率;发光动力学基本符合文献报道规律.而且化学发光法对其水解稳定性考察显示,取代基的电性和位阻是影响稳定性的两大因素.     

新型锍鎓盐类光生酸剂的合成及产酸性能研究

成功合成了两种新型锍鎓盐类光生酸剂,其结构经¹1HNMR和MS分析确认,并对其基本物性及在405、365nm光下乙腈溶液中的分解及产酸性能进行了研究,通过计算得出了分解及产酸量子产率.结果表明,两种化合物有较高的热分解温度和在常用有机溶剂中有较好的溶解性;在405nm光源下,4-(9′-苯基蒽基)苯基三氟甲磺酸锍鎓盐(PAGS1)和4-(4′-N,N-二乙基-1′-苯乙烯基)苯基三氟甲磺酸锍鎓盐(PAGS2)的分解量子产率分别为10%和15%,产酸量子产率为8.1%和13%;但在365nm光源下,分解及产酸量子产率均很低,说明两种光生酸剂对于405nm波长的光较敏感,适宜作为405nm光源下的光生酸剂.     

50~250 keV质子入射SiC和Si靶时的电子发射特性研究

在中国科学院近代物理研究所兰州重离子加速器国家实验室测量了能量范围为50~250 keV 的质子入射碳化硅靶和硅靶表面的电子发射产额。实验结果发现,两种半导体靶材的电子发射产额随质子入射能量变化趋势均与作用过程中电子能损随质子入射能量的变化趋势相似。通过分析电子发射的能量来源,发现实验中电子发射产额主要由动能电子发射产额贡献,势能电子发射产额可以忽略不计。两种靶材的电子发射产额均近似地正比于质子入射靶材过程中的电子能损,比例系数B随入射能量略有变化。     

Quantitative assessment of rhodamine spectra

With the development of single-molecule detection and super-resolution fluorescence imaging, rhodamine dyes gain new life. Through the modification of the N-substituents and the replacement of the oxygen atom in xanthene, the wavelength and brightness can be effectively changed. However, the spectra of rhodamine, especially due to the balance between ring-closed non-fluorescent lactone and ring-opened fluorescent zwitterion/cation, are sensitive to interference from various environmental factors. In this way, the spectral data of various rhodamines reported by different research groups under different test conditions lacked comparability, sometimes even lacked accuracy. In order to meet the requirements for the accuracy and uniformity of spectral data in the research of single molecule imaging and dye structure-fluorescence relationship study, we have tested the spectra of fifteen rhodamine dyes that cover the visible and near-infrared regions under exactly the same conditions. By studying the dependence of the spectra on dye concentrations, it was confirmed that 1 μmol/L was ideal for detection less from the interference of dye molecule aggregation. We provide comprehensive and reliable spectral data of these fifteen dyes, which are expected to be used as references for future research. And the direct comparison of different rhodamine spectra would help to understand the structure-fluorescence relationship of rhodamines.     

The synthesis and fluorescence properties of novel chromenone-crown ethers

o-Dihyroxy-3-phenylchromenone derivatives, namely, 6,7-dihydroxy-3-(3′,4′-dimethoxyphenyl)chromenone and 6,7-dimethoxy-3-(3′,4′-dihydroxyphenyl)chromenone, were obtained from 2,4,5-trihydroxybenzaldehyde/3,4-dimethoxyphenylacetic acid and 2-hydroxy-4,5-dimethoxybenzaldehyde/3,4-dihydroxyphenylacetic acid, respectively, in the presence of acetic anhydride and sodium acetate under an inert atmosphere, after treatment with MeOH/HCl(aq). The chromenone-crown ethers were prepared from cyclic condensation of o-dihydroxy-3-phenylchromenones with poly(ethylene glycol) ditosylates in the presence of CH₃CN/alkali metal carbonates. The chromatographically purified novel chromenone-crown ethers were identified by ¹H NMR, MALDI-TOF mass spectrometry and elemental analysis. The fluorescence and UV–vis spectroscopic properties of the obtained chromenone-crown ethers and their complexes with Li⁺, Na⁺ and K⁺ perchlorate salts were estimated in acetonitrile. The quantum yields of novel chromenone-crown ethers were determined by the comparative method.

     

Rheological Properties of Model and Crude Oil Systems when Wax Precipitate under Quiescent and Flowing Conditions

Wax precipitation and deposition is a recurring challenge in transportation of crude oil, and increased knowledge about the behavior of such systems is necessary. Microscopy and differential scanning calorimetry were used to follow the crystallisation of wax for two model systems. The amount of solid was also determined by the latter method as well. The flow and viscoelastic behavior were investigated around the wax precipitation temperature, and the yield stress was determined both after dynamic and static cooling. Interpretation of the results was carried out in view of crystal growth and microstructure of the wax crystals. The variables that were studied were wax composition, amount of wax and thermal and shear history.     

Beyond green with synthetic chlorophylls – Connecting structural features with spectral properties

The distinct features of chlorophylls in photosynthesis have led to the formation of numerous derivatives for applications encompassing solar energy conversion, molecular photonics, photodynamic therapy, and molecular imaging. Synthetic chlorins created de novo and bearing a geminal dimethyl group in the reduced ring have proved invaluable for fundamental studies. Four decades of research have led to accumulation of tabulated spectra for > 400 such synthetic chlorins with distinct structural frameworks (17-oxochlorins, 13¹-oxophorbines, chlorinimides) and substituents (alkyl, aryl, ethynyl, phenylethynyl, acetyl, formyl) located at specific (meso, β) positions. In this review, spectral traces (324 absorption, 247 fluorescence) are assembled along with photophysical data including the molar absorption coefficient (ε), fluorescence quantum yield (Φ_f) and singlet excited-state lifetime (τ_s). The review uses the accumulated spectral data derived from chlorins all containing a uniform molecular scaffold to (1) highlight the effects of molecular structure on spectral features, and (2) identify trends including how ε, Φ_f and τ_s vary with wavelength and other features. Use of a common geminal-dimethyl-substituted chlorin scaffold – beginning with no substituents, to one substituent at designated sites, and to 2 or more substituents – provides a systematic Aufbau approach for understanding the absorption spectra of chlorins on a path to and beyond the native chlorophylls. The review provides insights concerning the rational design of potent analogues of Nature’s preeminent red-region absorbers for potential utilization in diverse applications and is aimed at multiple audiences: those interested in spectral properties, tetrapyrrole photophysics, and the molecular design of new chromophores.     

Rational hydrothermal synthesis of graphene quantum dots with optimized luminescent properties for sensing applications

Hydrothermal synthesis using graphene oxide (GO) as a precursor has been used to produce luminescent graphene quantum dots (GQDs). However, such a method usually requires many reagents and multistep pretreatments, while can give rise to GQDs with low quantum yield (QY). Here, we investigated the concentration, the temperature of synthesis, and the pH of the GO solution used in the hydrothermal method through factorial design experiments aiming to optimize the QY of GQDs to reach a better control of their luminescent properties. The best synthesis condition (2 mg/mL, 175 °C, and pH = 8.0) yielded GQDs with a relatively high QY (8.9%) without the need of using laborious steps or dopants. GQDs synthesized under different conditions were characterized to understand the role of each synthesis parameter in the materials' structure and luminescence properties. It was found that the control of the synthesis parameters enables the tailoring of the amount of specific oxygen functionalities onto the surface of the GQDs. By changing the synthesis' conditions, it was possible to prioritize the production of GQDs with more hydroxyl or carboxyl groups, which influence their luminescent properties. The as-developed GQDs with tailored composition were used as luminescent probes to detect Fe³⁺. The lowest limit of detection (0.136 μM) was achieved using GQDs with higher amounts of carboxylic groups, while wider linear range was obtained by GQDs with superior QY. Thus, our findings contribute to rationally produce GQDs with tailored properties for varied applications by simply adjusting the synthesis conditions and suggest a pathway to understand the mechanism of detection of GQDs-based optical sensors.     

Hypertension in Prenatally Undernourished Young-Adult Rats Is Maintained by Tonic Reciprocal Paraventricular–Coerulear Excitatory Interactions

Prenatally malnourished rats develop hypertension in adulthood, in part through increased α₁-adrenoceptor-mediated outflow from the paraventricular nucleus (PVN) to the sympathetic system. We studied whether both α₁-adrenoceptor-mediated noradrenergic excitatory pathways from the locus coeruleus (LC) to the PVN and their reciprocal excitatory CRFergic connections contribute to prenatal undernutrition-induced hypertension. For that purpose, we microinjected either α₁-adrenoceptor or CRH receptor agonists and/or antagonists in the PVN or the LC, respectively. We also determined the α₁-adrenoceptor density in whole hypothalamus and the expression levels of α_1A-adrenoceptor mRNA in the PVN. The results showed that: (i) agonists microinjection increased systolic blood pressure and heart rate in normotensive eutrophic rats, but not in prenatally malnourished subjects; (ii) antagonists microinjection reduced hypertension and tachycardia in undernourished rats, but not in eutrophic controls; (iii) in undernourished animals, antagonist administration to one nuclei allowed the agonists recover full efficacy in the complementary nucleus, inducing hypertension and tachycardia; (iv) early undernutrition did not modify the number of α₁-adrenoceptor binding sites in hypothalamus, but reduced the number of cells expressing α_1A-adrenoceptor mRNA in the PVN. These results support the hypothesis that systolic pressure and heart rate are increased by tonic reciprocal paraventricular–coerulear excitatory interactions in prenatally undernourished young-adult rats.     

Selenium Alleviates the Adverse Effect of Drought in Oilseed Crops Camelina (Camelina sativa L.) and Canola (Brassica napus L.)

Drought poses a serious threat to oilseed crops by lowering yield and crop failures under prolonged spells. A multi-year field investigation was conducted to enhance the drought tolerance in four genotypes of Camelina and canola by selenium (Se) application. The principal aim of the research was to optimize the crop yield by eliciting the physio-biochemical attributes by alleviating the adverse effects of drought stress. Both crops were cultivated under control (normal irrigation) and drought stress (skipping irrigation at stages i.e., vegetative and reproductive) conditions. Four different treatments of Se viz., seed priming with Se (75 μM), foliar application of Se (7.06 μM), foliar application of Se + Seed priming with Se (7.06 μM and 75 μM, respectively) and control (without Se), were implemented at the vegetative and reproductive stages of both crops. Sodium selenite (Na₂SeO₃), an inorganic compound was used as Se sources for both seed priming and foliar application. Data regarding physiochemical, antioxidants, and yield components were recorded as response variables at crop maturity. Results indicated that WP, OP, TP, proline, TSS, TFAA, TPr, TS, total chlorophyll contents, osmoprotectant (GB, anthocyanin, TPC, and flavonoids), antioxidants (APX, SOD, POD, and CAT), and yield components (number of branches per plant, thousand seed weight, seed, and biological yields were significantly improved by foliar Se + priming Se in both crops under drought stress. Moreover, this treatment was also helpful in boosting yield attributes under irrigated (non-stress) conditions. Camelina genotypes responded better to Se application as seed priming and foliar spray than canola for both years. It has concluded that Se application (either foliar or priming) can potentially alleviate adverse effects of drought stress in camelina and canola by eliciting various physio-biochemicals attributes under drought stress. Furthermore, Se application was also helpful for crop health under irrigated condition.