17N+197Au反应中碎片与中子的符合测量

在3?3?.4MeV/u ¹⁷N束轰击¹⁹⁷Au靶产生的反应中,利用放置于不同角度组合的17个中子探测器(4°—83°)和14个半导体望远镜(2.3°—9.0°)对反应产物碎片与中子进行了符合测量.经对所得实验角分布积分得到Z=3—6元素的同位素产额分布.在参加者-旁观者模型框架下,采用¹⁷N原子核内部的不同密度分布计算了同位素产额分布并与实验数据做比较.     

塑料闪烁体的辐照特性

利用⁶⁰Co放射源分别对3种塑料闪烁体(BC-408, EJ-200, BC-404)进行辐照损伤研究, 比较辐照前后的透射谱、发射谱及光产额的变化, 发现3种闪烁体在低剂量具有较好的抗辐照性能; 当照射剂量超过1.44×10⁴Gy时,透射谱明显变坏, 光输出减少很严重, 但发射谱却保持不变.     

承受拉-扭组合载荷的薄壁圆筒屈服时产生塑性流动的条件

提出了在无外力作功的情况下，具有Bauschinger效应的弹塑性材料处于屈服状态产生自发的塑性流动时应满足的条件．这个条件不仅与材料的力学性能有关，而且还处决于材料的具体的载荷边界条件和变形．举例说明了承受拉一扭组合的薄壁圆筒中，采用组合强化模型时，产生塑性流动的具体条件．     

X-ray fluorescence in some rare earth and high Z elements excited by 661.6 keV γ-rays

The K-shell X-ray fluorescence cross sections are determined experimentally for 10 elements such as Pb, Hg, Ir, W, Lu, Tm, Dy, Tb, Gd and Nd at excitation energy of 661.6 keV associated with γ-rays of ¹³⁷Cs radioisotope. The technique employed involves the measurement of total intensity of fluorescent K X-rays that follow the photoeffect absorption of a known flux of γ-rays using a well type Nal(Tl) detector. The obtained results are compared with the available theoretical values and other measured values.     

Thermal behaviour of ethynyl and ethenyl terminated imide resins

A series of ethynyl and ethenyl end-capped imide resins were synthesised by the reaction of 9,9-bis(4-aminophenyl) fluorene (BAF) with pyromellitic dianhydride (PMDA)3/3′, 4,4′-benzophenone tetracarboxylic acid dianhydride (BTDA)/2,2-bis(3,4-dicarboxy phenyl) hexafluoropropane dianhydride (6F) and 3-ethynyl aniline/maleic anhydride. Structural characterisation was done by infra red and elemental analysis. Thermal characterisation was done by differential scanning calorimetry and thermogravimetric analysis. The decomposition temperatures of cured resins were above 200°C in nitrogen atmosphere. Char yield at 800°C ranged from 59–65.5%.     

Photo-initiated base-formation in a polymer matrix

It was found that amines were formed efficiently by the photolysis of O-acyloximes followed by hydrolysis in polystyrene films and the relationship between structures of O-acyloximes and yields of amines were investigated. O-phenylacetyl acetophenone oxime (PaApO), O-pivaloyl acetophenone oxime (PApO), and O-benzoyl acetophenone oxime (BApO) as monofunctional O-acyloximes and O,O′-succinyl diacetophenone oxime (SDApO) and O,O′-glutaryl diacetophenone oxime (GDApO) as bifunctional O-acyloximes were examined. The yields of amines for PaApO and SDApO under N₂ were ca. 70%, which was the highest among O-acyloximes examined in this experiment. On the other hand, the yields for PApO, BApO, and GDApO were less than 15% and it was verified that the hydrogen abstraction by imino radicals via 6-membered cyclic intermediates resulted in the lowering of yields. Although the effect of oxygen under photolysis on the yields of amine for PaApO was negligible under 50% conversion of PaApO, the yield decreased with further increase in the conversion and was 50% at 90% conversion. © 1994 John Wiley & Sons, Inc.     

Cavitands bearing four fluorophores

The synthesis of novel cavitands containing four fluorophores [tert-butoxycarbonyl protected 2,2′-bis(furyl)benzidine (t-BOC FurylBz) or 5,5′-bis(4-aminophenyl)-2,2′-bifuryl (t-BOC PFDA)] and ionophoric functional groups on the upper rim is reported. The cavitands bearing the four fluorophores emit blue light photoluminescence. In particular, the cavitand containing PFDA moieties exhibits a high photoluminescence quantum yield.     

氟代二苯乙烯氨基酸的合成及性能

以4-碘-L-苯丙氨酸为初始原料,经羧基和氨基的保护得到化合物2;化合物2与4-氟苯乙烯进行Heck反应得化合物3;化合物3脱去保护基得氟代二苯乙烯氨基酸(4,47.4%);其结构经1H NMR,13C NMR,IR和MS(ESI-TOF)确证。光学性质研究结果表明:4的激发、发射波长分别为314 nm和355 nm,斯托克斯位移为41 nm,荧光量子产率为0.22。化合物4在甲醇溶液中存在光致顺反异构现象,反式→顺式结构转变速率常数为0.026 min^-1。     

Dialing in color with rare earth metals: facile photoluminescent production of true white light

Combining polymeric architectures with metal ions produces hybrid materials with extremely rich properties. We are studying polymers containing terpyridine in the side chain. In this report, the chelation of lanthanide ions, Eu³⁺, Tb³⁺, and Dy³⁺ resulted in metal functionalized copolymers that exhibited excellent emission of red, green, and blue light respectively. The polymer architecture easily allows incorporation of all three colors into the material, which leads to the facile production of true white light in solution or the solid state. Quantum efficiencies for the polymer systems were determined. The white light system had an efficiency of 5%. Various combinations of colors were achieved from the basic RBG colors by simply varying the metal ion ratios in the polymer backbone. This easy tuning of the color makes these systems attractive. Copyright © 2007 John Wiley & Sons, Ltd.     

New tetra-aryl and bi-aryl porphyrins bearing 5,15-related fluorenyl pendants: the influence of arylation on fluorescence

The new tetra-aryl trans-A₂B₂-porphyrin with two fluoren-2-yl and two phenyl groups at the meso-positions has been synthesized and characterized, together with the analogous bi-aryl trans-A₂-porphyrin incorporating only the fluorenyl groups. The photophysical properties of these new compounds in solution are reported. The two additional phenyl groups in the A₂B₂ porphyrin stabilize the first excited singlet state by approximately 500 cm⁻¹ compared to the A₂ system, as revealed by the red-shift of the absorption Q bands and of the fluorescence emission bands. Both compounds display enhanced emission quantum yields compared to tetraphenylporphyrin: the augmentation is higher for the tetra-aryl than for the bi-aryl system, although not as high as for tetrafluorenylporphyrin. Fluorescence lifetime measurements of the series of four compounds suggest that the trends can be interpreted in terms of the larger influence of fluorenyl over phenyl groups in increasing the fluorescence radiative rate constant of the porphyrin, k_f.