遥测振动信号EMD-WVD分布应用研究

飞行器飞行试验采集的遥测振动信号频段丰富、成分构成复杂,合理有效地解读其包括的时频信息在分析飞行器结构和环境特性方面至关重要。依托经验模态分解(EMD)方法将复杂信号分解成准单分量信号,借助相关系数法将伪分量信号剔除,保证分解信号的有效性。通过EMD和 WVD方法的结合,将保留的准单分量信号进行WVD变换并做平滑伪处理,从而获得复杂信号的时频分布。EMD-WVD组合模型经在仿真信号上的应用检验,能够检测信号自身的时频特性,进一步应用其在遥测振动信号上,同平滑伪WVD抑制交叉项方法进行了比较,结果表明EMD-WVD组合模型更加有效,能够反映复杂工程信号的时频分布特性。     

Influence of stiffeners on plate vibration and radiated noise excited by turbulent boundary layers

The influence of stiffeners on plate vibration and noise radiation induced by turbulent boundary layers is investigated by wind tunnel measurements. Plates with and without stiffeners are tested under the flow speed of 60 m/s, 71 m/s and 86 m/s, respectively. The stiffeners are set either perpendicular or parallel to the direction of the free stream. Measured vibration and noise levels are compared with theoretical calculations, where wall pressure cross-spectra are described by the Corcos model. For the plates tested, it is evident that stiffeners perpendicular to the direction of the free stream could increase noise radiation, but have almost no influence on vibration level of plates.     

基于单幅数字散斑投影及图像相关的离面振动测量

采用单幅数字散斑图投影及高速数字图像采集技术,研究了动态离面位移的测量。采用商用液晶投影仪将计算机产生的模拟散斑图投影到待测动态变形物体表面,由高速数字图像采集设备摄取并保存变形散斑图,采用时间序列数字图像相关软件计算出物体表面各点随时间变化的离面位移。这种方法用于振动分析时不仅可以获得振型分布,而且还可以获得各点的振幅值。与现有的激光频闪照相测振及激光多普勒测振等方法相比,具有光学系统简单,可全场定量测量。悬臂梁振动实验结果证实了该方法的有效性。     

Calculation of the vibration–rotational transition intensities of water molecules trapped in an argon matrix: stretching O–H vibrations spectral region

The frequencies and intensities of vibration–rotational transitions of water molecules in an argon matrix were calculated for temperatures of 6 and 30 K. The rigid asymmetric top approximation was used with available literature values of the effective rotational constants in the ground and excited vibrational states. The calculations were carried out by taking into account the existence of a non-equilibrium population distribution between the rotational levels of ortho- and para-water isomers. It was assumed that the temperature relaxation of the population of rotational levels is independent of the ortho- and para-isomers. Comparison of the results of the theoretical calculations with experimental literature data shows good agreement for the majority of the rotational structure lines for symmetric and antisymmetric stretching vibrations both in the frequency values and in the values of the relative intensities.     

Holographic vibration measurements of rough surfaces using a LCSLM

This paper describes measurements of a vibrating object with rough surface by the time-averaged method of holography using a newly designed optically addressed liquid crystal spatial light modulator with a resolution of 102 lp/mm and a diffraction efficiency of 16%. An object vibrating faster than several tens of Hz could be visualized. The pattern obtained by the method provides the locus of vibrating nodes. The advantage of this method is that a high contrast pattern of a vibrating object can be imaged in near-real-time, although the sensitivity of vibration is decreased.     

Flexural vibration analyses of piezoelectric ceramic tubes with mass loads in ultrasonic actuators

Based on Timoshenko beam model, a theoretical model of radially polarized piezoelectric ceramic tubes is investigated. In the model, the piezoelectric effects are considered, and the shear correction factor is introduced which reveals effects of the size of the cross-section and Poisson’s ratio. Based on the model, the particular attentions are devoted to effects of the boundary conditions at two ends on flexural resonance frequencies of the piezoelectric ceramic tubes. Changing the sizes of the tubes and the mass loads at both free ends, the variations of the flexural resonance frequencies of free–free piezoelectric ceramic tubes are calculated theoretically. Besides, the flexural resonance frequencies of the piezoelectric ceramic tube cantilevers with mass loads at one free end are also investigated theoretically. To verify accuracy of the theoretical mode, the flexural resonance frequencies for different lengths of the piezoelectric ceramic tubes and different loaded masses are measured experimentally. The theoretical results agree well with the experimental measurement, which demonstrates that the model is accurate for analyzing the flexural resonance frequencies of the piezoelectric ceramic tubes with mass loads.     

干式变压器有限元仿真模型的电磁和振动分析

随着电力需求的逐年增长,干式变压器的数量也在不断增加。干式变压器在运行时存在着振动和噪声的问题,为了对干式变压器振动的规律与特点进行研究,本文建立了干式变压器本体振动的有限元仿真模型,通过电磁分析获得相应的磁场分布,然后利用结构动力学分析得到其本体振动的相关规律。通过对处于运行状态的变压器振动数据进行实测分析,得到变压器振动的特征频率,然后对仿真结果进行对比分析,可以发现振动幅度与频率之间存在的关系。本文的研究结果可对干式变压器的减振降噪研究提供参考。     

用等效网络方法求均匀弹簧纵振动的本征频率

利用机电类比方法导出了均匀质量弹簧在几种特定边界条件下的本征频率方程,并给出了相应的本征频率公式。体现了等效网络理论分析机械振动问题的优越性。     

舰载导弹振动环境状态实时监测系统设计

为了全面监测舰上导弹贮存的振动环境,设计了对舰艇横摇、纵摇和升沉条件下的加速度信号实时监测系统;该系统采用一体化、模块化设计的思想,应用堆栈式结构总线PC104,提高了系统的便携性、可靠性;采用两种供电方式提高了系统适应性;文章详细阐述了硬件系统和软件系统的设计,并重点对数据采集存储和数据显示功能实现进行了论述;在1 000 Hz采样频率的实验条件下,采集数据准确可靠,精确度为99.75%,达到了系统设计的要求。     

机载多框架光电吊舱两级隔振设计

在分析了目前常用的机载光电设备隔振系统的基础上,针对两轴四框架的结构特点,提出了一种基于多框架的两级隔振方案,克服了目前隔振系统体积、重量大,加工装配要求高的缺点。基于隔振模型的理论计算表明,根据系统给定的质量比和频率比,优化选择内外框架的刚度比,即选择合适的内外框隔振器可达到理想的隔振效果。通过某型光电吊舱的扫频实验...