Effect of Drying Methods on the Structure and Combustion Activity of Mn—Substituted Hexaaluminate Catalysts

Conventional oven drying (COD) and supercritical drying (SCD) methods were applied to the preparation of Mn-substituted hexaaluminate (BaMnA111O19-α) catalysts. The effect of drying methods on phase composition, specific surface area, pore structure, reduction behavior of Mn^3 ions, and combus-tion activity of the samples was investigated. The homogenous mixing of the components in the sol-gel process could be maintained by SCD, and the hexaaluminate phase was almost the only phase of the resulting materials after calcination. H2-TPR revealed that the Mn^3 ions in the sample obtained by SCD were easier to be reduced than that by COD. Moreover, the samples obtained by SCD have higher surface area, narrower pore size distribution, and higher combustion activity than those obtained by COD.     

Zeta电位法选择农药悬浮剂所需润湿分散剂

采用Zeta电位法对质量分数为20%的吡氟草胺悬浮剂所需润湿分散剂进行筛选,以激光粒度分布仪对实验体系的平均粒径(Dav)进行了验证。研究结果表明,除木质素磺酸钠以外,阴离子型润湿分散剂均可使体系的Zeta电位绝对值(│ζ│)达到40mV以上,体系较为稳定;阴离子型润湿分散剂NNO和MorwetD425复配后,相同使用量下体系的│ζ│较单一使用NNO和MorwetD425的大;当m(NNO):m(MorwetD425)=1:4,复配润湿分散剂的总质量分数为1%时,│ζ│达到最大值,颗粒平均粒径最小,热贮前后变化很小,体系达到最佳分散效果。因此,Zeta电位表征润湿分散剂在农药悬浮剂中的润湿分散性能与体系颗粒平均粒径的变化规律有良好的对应关系,故Zeta电位可作为表征润湿分散剂分散性能优劣的指标。     

超临界流体干燥过程的分析

以ZrOCl2•8H2O为原料，采用超临界流体干燥（SCFD）法，在短时间内制备出大孔体积高比表面ZrO2气凝胶超细粉．该法具有良好的稳定性和可靠性．建立了醇凝胶中液相含水量的分析方法，为产品质量控制及确认体系是否处于超临界状态提供了依据．对抽提后的溶剂分析表明，SCFD过程是一物理过程．对水的抽提干燥过程亦进行了初步的理论探讨．     

阳极氧化与超临界干燥结合制备多孔硅

多孔硅（PS）在室温下发射强可见光，这一发现在国际上引起极大关注，成为材料科学、半导体物理和化学以及信息科学领域研究的热点［1，2］．最近三、四年，国内外对PS制备工艺、影响PS发光的因素、PS发光机制、PS应用前景等方面进行了广泛的研究［2］，但有一些基本问题仍待解决，如关于PS发光机制尚存在分歧；PS电致发光效率低，离应用差距甚远；高多孔度PS微孔结构不稳定等．PS微孔内溶剂蒸发过程中，由于毛细管张力的存在，造成微孔骨架受力不匀．强的应力使PS骨架脆弱，甚至微孔结构坍缩，从而导致PS结构不稳定．对于高多孔度…     

Fe／ZrO_2气凝胶超细粒子催化剂的制备、表征及F－T反应性能的研究

用超临界流体干燥法制备出大孔高比表面高分散态Ｆｅ／ＺｒＯ_２气凝胶超细粒子催化剂，研究了在其制备过程中织构性质、颗粒大小、体相和表面结构的变化，并与普通浸渍法制备的Ｆｅ／ＺｒＯ_２催化剂作了对比。对几种Ｆｅ／ＺｒＯ_２催化剂的Ｆ－Ｔ反应性能考察表明，Ｆｅ／ＺｅＯ_２气凝胶超细催化剂显示出高的反应活性；随载体ＺｒＯ_２颗粒尺寸减小，活性组分铁的分散度变大，其颗粒尺寸变小，催化剂比表面积增大，反应活性增大，甲烷和低碳烃生成量增加，重质组分减少，认为产物烃分布主要受催化剂活性相颗粒尺寸效应制约。     

Acidity of Alginate Aerogels Studied by FTIR Spectroscopy of Probe Molecules

Supercritical drying of alginate gels is an efficient way to prepare aerogels with high surface area (>300 m² · g⁻¹). FTIR spectroscopy allows to monitor the adsorption of NH₃ from the gas phase onto the acid sites of the alginate. Free carboxylic groups are effective Brønsted sites, whereas the divalent cations used in the ionotropic gelation present the properties of Lewis sites. The ratio between Brønsted and Lewis sites provides infomation on the role of pH in alginate gelation and suggests that non-buffered gelation by transition-metal cations is a mixed ionotropic-acid process.     

Fine Structure of Meniscus of a Wetting Liquid

Equilibrium of a capillary meniscus near a wetting film on a solid in a gravitational field is considered. Unlike previous studies, the present study proves that the fine meniscus structure in a gravitational field is a universal feature—it takes place in a wide variety of problems. In the general case, the capillary meniscus is at a certain distance from the wetting film and does not intersect it. The relation for the minimum distance from the arbitrary meniscus to the solid generalizes the Derjaguin formula for a flat slit. An equation that optimally approximates the meniscus with due account of the contribution of the meniscus/film transition region is derived. A refined solution to the problem of a meniscus on a vertical plate is derived within the perturbation theory. Both gravity and nonuniformity of the vertical static film above a capillary–gravitational meniscus do not affect the minimum distance (the influence is less than 0.0001). A general method for solving sophisticated problems of capillary equilibrium in gravitational field is proposed.     

Surface characteristics and wetting properties of sol–gel coated base paper

Two hybrid coatings synthesized by using alkoxysilanes as precursors in a sol–gel process, differing from each other in terms of the organic components in alkoxysilanes, have been developed to improve the water repellent properties of base paper. The sol–gel‐coated base paper samples were characterized by scanning electron microscopy, atomic force microscopy, confocal laser scanning microscopy, X‐ray photoelectron spectroscopy, time‐of‐flight secondary ion mass spectrometry, and contact angle measurements. The sol–gel coatings were found to clearly change the surface properties of base paper. Thin coating layers were formed on base paper surfaces. The topographical data indicated the formation of discontinuous thin films; the time‐of‐flight secondary ion mass spectrometry analyses confirmed that the coatings were covering the fibres but only partially covered the fibre–fibre intersections. Water and the subsequent heat treatment used as a reference treatment reduced the surface roughness and porosity and slightly changed the surface chemistry of the base paper. The wettability and absorptivity of base paper was clearly reduced by the applied coatings. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis of Highly Porous Organic/Inorganic Hybrids by Ambient Pressure Sol-Gel Processing

This paper reports the synthesis of highly porous organic/inorganic hybrids by a two-step acid-base catalyzed sol-gel process and ambient pressure drying. In the method organic and inorganic precursors are copolymerized so as to incorporate organic ligands into the solid network. The two-step acid-base catalyzed process was used to prevent phase segregation during the hydrolysis and co-condensation of organic and inorganic precursors. The organic ligands incorporated into the solid gel network modify the surface chemistry. Thus, the wetting angle is significantly increased so that the collapse of the gel network is greatly reduced upon the removal of pore fluid during drying. Organic/inorganic hybrids with BET surface areas above 1250 m2/g, porosities above 75% and pore sizes of 8 nm have been synthesized.     

不同干燥过程对超细TiO2粉体性质的影响

考察了采用不同干燥工艺制备的TiO2粉体在粒子形貌、颗粒大小与分布、晶相组成以及比表面积和孔结构等织构和结构性质方面的差异。结果表明，利用常规的干燥方法，由水凝胶脱水所得的颗粒，颗粒间严重团聚，颗粒粒径大且分布不均匀，比表面积和孔体积最小；由醇凝胶直接脱水，则可以显著提高粉体的织构性能．而采用超临界流体干燥法则可以进一步提高粉体的性能，比表面积由水凝胶的4．88m2·g－1增大到113．8m2·g－1，提高了近30倍；孔体积由0．027cm3·g－1增大到0．41cm3·g-1．大约提高了15倍；而且其能够有效地防止粒子间的团聚，较好地保持了湿凝胶的网络结构，使颗粒尺寸降低且分布均匀，可重复性好．