High frequency circular translation pin-on-disc wear testing of UHMWPE using a ball-on-flat contact along a hypotrochoidal track

To intensify experimental research within the field of orthopaedic tribology, a three-station, dual motion, high frequency (25.3 Hz) circular translation pin-on-disc wear test device was recently introduced. In the present study, the pins were CoCr with a spherical, polished bearing surface of 28 mm radius, whereas the flat discs were conventional UHMWPE. This configuration was intended to simulate the wear mechanisms of total knee prostheses. The number of wear cycles run was as high as 200 million. The mean wear rate was 0.35 mg per one million cycles (0.77 mg/24 h) which corresponded to a mean wear factor of 3.5 × 10⁻⁶ mm³/Nm. The study provided further proof that a wear test for orthopaedic implant materials can be accelerated by substantially increasing the cycle frequency, provided that the sliding velocity remains close to the values obtained from biomechanical studies. Hence, the moderate frictional heating will not lead to unrealistic wear mechanisms.     

Rapid simulation procedure for fretting wear on the basis of the method of dimensionality reduction

We suggest a numerical procedure for rapid simulation of fretting wear in a contact of two bodies subjected to tangential oscillations with a small amplitude. The incremental wear in each point of contact area is calculated using the Reye–Archard–Khrushchov wear criterion. For applying this criterion, the distributions of pressure and relative displacements of bodies are required. These are calculated using the method of dimensionality reduction (MDR).     

Accelerated wear testing of polyurethane hydraulic seal

The wear characteristics of a polyurethane (PU) hydraulic seal were investigated using a hydraulic seal tester and a pin-on-plate reciprocating tribo-tester, and the results were compared to field data with the aim of developing an accelerated wear test method for hydraulic seals. Tests using a hydraulic seal tester and a pin-on-plate reciprocating tribo-tester were found to reproduce abrasive wear of PU from the field. However, a significant compression set was observed from the test using the hydraulic seal tester. Motivated by the occurrence of abrasive wear from the field, the discolored lubricant and the lubricant with alumina particles were further used for testing using the pin-on-plate reciprocating tribo-tester. The height decrease data of the sealing surface showed that the wear was accelerated by factors of 2.1–3.4 using these degraded lubricants. The outcomes of this work are expected to aid in the design of reliable accelerated life testing for hydraulic seals.     

Mechanisms of Autocatalysis

Self‐replication is a fundamental concept. The idea of an entity that can repeatedly create more of itself has captured the imagination of many thinkers from von Neumann to Vonnegut. Beyond the sciences and science fiction, autocatalysis has found currency in economics and language theory, and has raised ethical fears memorably summed up by the “gray goo” trope. Autocatalysis is central to the propagation of life and intrinsic to many other biological processes. This includes the modern conception of evolution, which has radically altered humanity’s image of itself. Organisms can be thought of as imperfect self‐replicators which produce closely‐related species, allowing for selection and evolution. Hence, any consideration of self‐replication raises one of the most profound questions of all: what is life? Minimal self‐replicating systems have been studied with the aim of understanding the principles underlying living systems, allowing us to refine our concepts of biological fitness and chemical stability, self‐organization and emergence, and ultimately to discover how chemistry may become biology.     

一种交联聚合物薄膜的表面引发聚合制备及其摩擦磨损性能

采用活性可控的表面引发原子转移自由基聚合方法,在硅片表面制备了聚3-(三甲氧基硅)丙基甲基丙烯酸酯聚合物刷,其中产物侧链的三甲氧基硅基团提供相邻分子间相互交联的位点而形成聚合物薄膜;采用衰减全反射红外光谱仪和原子力显微镜分析了薄膜的化学结构和微观形貌,利用椭圆偏光测厚仪和接触角测量仪测定了其厚度和水接触角,并利用微观和宏观摩擦磨损测试装置评价了薄膜的摩擦磨损性能.结果表明,所制备的薄膜具有聚合物的结构特征以及良好的减摩抗磨特性,且其抗磨能力随着厚度增加而增强.     

Various ways to strengthen the fiber‐matrix interface for enhanced composite performance

Surface treatment (ST) of carbon fibers (CF) leads to an enhancement in fiber‐matrix adhesion. However, it deteriorates the strength of a fiber which makes its reinforcing action less effective in a composite. These effects in opposite directions control the net strength of a composite, and hence, the treatment has to be judiciously applied, which would enhance the first factor and minimize the second one. Authors have recently reported on four effective techniques (using various doses) such as treatments with nanoparticles of Ytterbium fluoride (YbF₃)_, cold remote nitrogen–oxygen plasma (CRNOP), γ‐ray irradiation and nitric acid oxidation. Amongst these methods, nitric acid oxidation is studied in depth in the literature, and γ‐ray irradiation is sparingly studied. However, nano‐YbF₃ and CRNOP were first time reported in the literature by the authors. However, comparative aspects of all these methods were not addressed. In this paper, these aspects in details are discussed to lay down the right criteria for selection of a ST technique of CF to design the desired performance of a composite. The composites with polyetherimide and treated CF (including untreated) were developed and evaluated for various properties including tribological one. Treated CF based composites exhibited excellent mechanical and tribological properties (under harsh operative conditions with wear rates ≈ 1 × 10^?15 m³/Nm and μ ≈ 0.09). It was concluded that for strength and tribo‐performance, different treatments and doses are to be employed. Overall nanosized‐YbF₃ treatment of CF proved to be the most promising ST method. Copyright © 2013 John Wiley & Sons, Ltd.     

Prebiotically Plausible Autocatalytic Peptide Amyloids

The prebiotic emergence of molecules capable both of self-replication and of storing information was a defining event at the dawn of life. Still, no plausible prebiotic self-replication of biologically relevant molecules has been demonstrated. Building upon the known templating nature of amyloids, we present two systems in which the products of a peptide-bond-forming reaction act as self-replicators to enhance the yield and stereoselectivity of their formation. This first report of an amino acid condensation that can undergo autocatalysis further supports the potential role of amyloids in prebiotic molecular evolution as an environment-responsive and information-coding system capable of self-replication.     

Prebiotic Route to Thymine from Formamide—A Combined Experimental–Theoretical Study

Synthesis of RNA nucleobases from formamide is one of the recurring topics of prebiotic chemistry research. Earlier reports suggest that thymine, the substitute for uracil in DNA, may also be synthesized from formamide in the presence of catalysts enabling conversion of formamide to formaldehyde. In the current paper, we show that to a lesser extent conversion of uracil to thymine may occur even in the absence of catalysts. This is enabled by the presence of formic acid in the reaction mixture that forms as the hydrolysis product of formamide. Under the reaction conditions of our study, the disproportionation of formic acid may produce formaldehyde that hydroxymethylates uracil in the first step of the conversion process. The experiments are supplemented by quantum chemical modeling of the reaction pathway, supporting the plausibility of the mechanism suggested by Saladino and coworkers.     

Evaluation of the Storage Conditions and Type of Cork Stopper on the Quality of Bottled White Wines

The effects of different storage conditions, light exposure, temperature and different commercially available cork stoppers on the phenolic, volatile and sensorial profile of Verdejo wines were studied. Two natural corks of different visual quality and a microgranulated cork stopper were investigated over one year at two different storage conditions. One simulating light exposure and temperature in retail outlets and the other simulating optimal cellar conditions (darkness and 12 °C). The wines stored under commercial conditions showed greater losses of total and free SO₂ and higher levels of brown-yellowish tones, related to the oxidation of flavan-3-ols. Although these wines underwent a decrease in the total content of stilbenes, a significant increase in trans-piceid was observed. In addition, these wines suffered important changes in their volatile and sensory profile. Volatile compounds with fruity and floral aromas decreased significantly, while volatile compounds related to aged-type characters, as linalool oxides, vitispirane, TDN or furan derivatives increased. Wines stored in darkness at 12 °C underwent minor changes and their sensory profiles were similar to wine before bottling. The high-quality natural corks and microgranulated corks better preserved the quality of the white wines from a sensory point of view. These results showed that temperature and light exposure conditions (diffuse white LEDs and 24 ± 2 °C) in retail outlets considerably decrease the quality of bottled white wines and, consequently, their shelf life, due to the premature development of aged-type characters.