Study of the effect of laser treatment on the initial oxidation behaviour of Al‐coated NiCrAlY bond‐coat

In this study, the initial oxidation behaviour of laser‐treated Al/NiCrAlY bond‐coat is investigated. Two approaches, (i) Al film sputtering on the surface of bond‐coat and (ii) laser treatment, have been taken to enhance the oxidation resistance of NiCrAlY bond‐coat. Experimental results showed that after laser treatment, the Al/NiCrAlY bond‐coat exhibited a columnar dendritic microstructure without cracks and voids. A dense and continuous α‐Al₂O₃/Cr₂O₃ multilayer was found to form on the bond‐coat surface. Results on the cyclic oxidation at 1200 °C (for time ≤ 204 h) revealed that the laser‐treated Al/NiCrAlY bond‐coat exhibited better oxidation resistance compared to as‐sprayed NiCrAlY, Al/NiCrAlY and laser‐remelted NiCrAlY bond‐coat. The formation of θ‐Al₂O₃, NiO, Cr₂O₃ and NiCr₂O₄ spinel oxides was observed to be suppressed due to the preformed α‐Al₂O₃ scale during initial oxidation on the surface of laser pre‐oxidized Al/NiCrAlY bond‐coat. Copyright © 2013 John Wiley & Sons, Ltd.     

On the determination of the point of fracture initiation by the load separation criterion in J-testing of ductile polymers

The application of an experimental approach based on the load separation criterion for the determination of the point of fracture initiation in a fracture test on a ductile polymer was critically examined. To this aim, the fracture process outlined by the application of this method was related to that described by the visual analysis of the fracture surfaces obtained in fracture tests on nominally identical specimens, in which different levels of crack extension were produced. The material examined was an acrylonitrile-butadiene-styrene (ABS) resin, and the fracture tests were performed at low loading rate on single-edge notched in bending specimens.The results demonstrated that this load separation criterion based methodology is a promising approach for the determination of the point of fracture initiation, and for material fracture resistance, J_Ic, evaluation. The method also has experimental simplicity and a high degree of repeatability.     

Cu-V-O氧化物催化燃烧甲苯的活性和抗硫性

采用溶胶-凝胶法制备一系列不同Cu/V比例的Cu-V-O催化剂,利用XRD、BET、H₂-TPR等手段对催化剂进行了表征,并考察其催化燃烧甲苯的活性和抗硫性。结果表明,适量的Cu掺杂会提高催化剂比表面积,而且Cu-V可以形成Cu₃V₂O₈晶型结构,使V₂O₅晶格氧活动增加,提高催化剂氧化-还原能力。其中,Cu_0.15V_0.85催化剂表现出最佳的活性和抗硫性;通过TiO₂负载可以进一步提高催化剂对甲苯的催化燃烧活性和抗硫性。     

Graphene Oxide Protected Nucleic Acid Probes for Bioanalysis and Biomedicine

Recently, the binding ability of DNA on GO and resulting nuclease resistance have attracted increasing attention, leading to new applications both in vivo and in vitro. In vivo, nucleic acids absorbed on GO can be effectively protected from enzymatic degradation and biological interference in complicated samples, making it useful for targeted delivery, gene regulation, intracellular detection and imaging with high uptake efficiencies, high intracellular stability, and very low toxicity. In vitro, the adsorption of ssDNA on GO surface and desorption of dsDNA or well‐folded ssDNA from GO surface result in the protection and deprotection of DNA from nucleic digestion, respectively, which has led to target‐triggered cyclic enzymatic amplification methods (CEAM) for amplified detection of analytes with sensitivity 2–3 orders of magnitude higher than that of 1:1 binding strategies. This Concept article explores some of the latest developments in this field.     

Integrated Hollow Mesoporous Silica Nanoparticles for Target Drug/siRNA Co‐Delivery

A hollow mesoporous silica nanoparticle (HMSNP) based drug/siRNA co‐delivery system was designed and fabricated, aiming at overcoming multidrug resistance (MDR) in cancer cells for targeted cancer therapy. The as‐prepared HMSNPs have perpendicular nanochannels connecting to the internal hollow cores, thereby facilitating drug loading and release. The extra volume of the hollow core enhances the drug loading capacity by two folds as compared with conventional mesoporous silica nanoparticles (MSNPs). Folic acid conjugated polyethyleneimine (PEI‐FA) was coated on the HMSNP surfaces under neutral conditions through electrostatic interactions between the partially charged amino groups of PEI‐FA and the phosphate groups on the HMSNP surfaces, blocking the mesopores and preventing the loaded drugs from leakage. Folic acid acts as the targeting ligand that enables the co‐delivery system to selectively bind with and enter into the target cancer cells. PEI‐FA‐coated HMSNPs show enhanced siRNA binding capability on account of electrostatic interactions between the amino groups of PEI‐FA and siRNA, as compared with that of MSNPs. The electrostatic interactions provide the feasibility of pH‐controlled release. In vitro pH‐responsive drug/siRNA co‐delivery experiments were conducted on HeLa cell lines with high folic acid receptor expression and MCF‐7 cell lines with low folic acid receptor expression for comparison, showing effective target delivery to the HeLa cells through folic acid receptor meditated cellular endocytosis. The pH‐responsive intracellular drug/siRNA release greatly minimizes the prerelease and possible side effects of the delivery system. By simultaneously delivering both doxorubicin (Dox) and siRNA against the Bcl‐2 protein into the HeLa cells, the expression of the anti‐apoptotic protein Bcl‐2 was successfully suppressed, leading to an enhanced therapeutic efficacy. Thus, the present multifunctional nanoparticles show promising potentials for controlled and targeted drug and gene co‐delivery in cancer treatment.     

Influence of sputter power on structural and electrical properties of TiO2 films for Al/TiO2/Si gate capacitors

Titanium dioxide (TiO₂) thin films were deposited onto p‐Si substrates held at room temperature by reactive Direct Current (DC) magnetron sputtering at various sputter powers in the range 80–200 W. The as‐deposited TiO₂ films were annealed at a temperature of 1023 K. The post‐annealed films were characterized for crystallographic structure, chemical binding configuration, surface morphology and optical absorption. The electrical and dielectric properties of Al/TiO₂/p‐Si structure were determined from the capacitance–voltage and current–voltage characteristics. X‐ray diffraction studies confirmed that the as‐deposited films were amorphous in nature. After post‐annealing at 1023 K, the films formed at lower powers exhibited anatase phase, where as those deposited at sputter powers > 160 W showed the mixed anatase and rutile phases of TiO₂. The surface morphology of the films varied significantly with the increase of sputter power. The electrical and dielectric properties on the air‐annealed Al/TiO₂/p‐Si structures were studied. The effect of sputter power on the electrical and dielectric characteristics of the structure of Al/TiO₂/p‐Si (metal‐insulator‐semiconductor) was systematically investigated. Copyright © 2014 John Wiley & Sons, Ltd.     

Au-MgB2-Au纳米结点的负微分电阻效应

运用密度泛函理论结合非平衡格林函数的方法对MgB2直线原子链与两半无限Au（100）电极构成纳米结点的电子输运特性进行了第一性原理计算．在模拟Au-MgB2-Au纳米结点的拉伸过程中,计算了结点在不同距离下的结合能与电导．结果发现结点的Au-B键长为1．90A,B-Mg键长为2．22A时,结合能最大,结构最稳定,此时结点平衡电导为0．51G0（G0=2e^0／h）．通过计算投影态密度发现电子通过结点时主要是通过B、Mg原子的px和py电子轨道形成的π键进行传输的．在-1．5～1．5V的电压范围内,结点的电流-电压近似为线性关系,表现出类似金属的导电性质,而当正负电压高于15V时,电流对称性逐渐减小,即存在负微分电阻效应,从不同电压下透射谱的变化对负微分电阻现象进行了分析与讨论．     

顺铂耐药的分子机制

顺铂被广泛用于多种类型的实体肿瘤的临床治疗.DNA是顺铂的主要靶点,顺铂结合会导致DNA损伤并诱发细胞凋亡.然而,顺铂化疗常常受到内在的和获得性的耐药性的限制.在过去30多年里,大量的研究致力于对顺铂耐药性的理解,并且提出了几种导致顺铂耐药性的分子机制.这些机制显示顺铂的耐药性具有多因素特征.本文系统描述和讨论了顺铂的耐药性机制,包括细胞内药物积累的减少,药物去活作用的增强,DNA修复作用,DNA损伤反应和凋亡通路的变化以及一些间接信号通路的调控影响.     

Biological evaluation of 2-methylpyrimidine derivatives as active pan Bcr-Abl inhibitors

We designed a series of 2-methylpyrimidine derivatives as new BCR-ABL inhibitors using scaffold-hopping strategy.These synthetic compounds exhibited significant inhibition against a broad spectrum of Bcr-Abl mutants including the gatekeeper T315I mutant.Compound 7u showed very potent kinase inhibitory activities against Bcr-Abl WT,Bcr-Abl E255K,Bcr-Abl Q252H,Bcr-Abl G250E and Bcr-Abl T315I,with IC50 values of 0.13 nM,0.17 nM,0.24 nM,0.19 nM and 0.65μM,respectively.This compound also displayed anti-proliferation activity against K562 cell line with an IC50 value of 1.1 nM,thus representing a new lead for further optimization.     

硅表面活性剂增强的双网络耐高温多孔有机硅弹性体

采用聚醚改性三硅氧烷表面活性剂、 丙烯酸酯改性硅油和水3种组分制备了稳定的油包水(W/O)乳液, 经酸碱催化水解、 紫外引发聚合和干燥除水过程得到了双网络多孔有机硅弹性体. 扫描电子显微镜(SEM)分析结果表明, 所制备的有机硅弹性体具有丰富的孔径结构分布. 压缩强度测试结果表明, 弹性体具备良好的耐压缩性能, 45%压缩应变下循环50次, 仍具备良好的回弹性能. 有机硅弹性体具有优异的耐高温性能, 分解温度为370 ℃, 高于绝大多数多孔有机硅弹性体材料的分解温度. 丙烯酸酯改性硅油的制备工艺成熟、 廉价易得, 显著降低了多孔有机硅弹性体的生产成本, 为规模性开发有机硅材料提供了新的思路和应用前景.