电子束、离子辅助和离子束溅射三种工艺对光学薄膜性能的影响

运用电子束、离子辅助和离子束溅射三种镀膜工艺分别制备光学薄膜,包括单层氧化物薄膜和增透膜,然后采取一系列测试手段,如Zygo轮廓仪、原子力显微镜、表面热透镜技术和X射线衍射等技术,来分析和研究不同的工艺对这些薄膜性能的不同影响,以判断合理的沉积工艺。     

Novel Protonic Conductive Silicates Produced by the Sol-Gel Method

ABSTRACT

Materials which display ionic conductivity were produced by the sol-gel and microemulsion-gel methods. The charging and discharging characteristics were investigated and it was found that a single ionic species was responsible for the conduction, the ionic species being residual protons from the initial component mixture. The complex impedence of various samples was measured and the ionic conductivities ranged in value from 9 × 10^?8 to 1 × 10^?5 ohm^?1 cm^?1. An Arrhemius plot for a microemulsion-gel revealed that the energy of activation was 0.15 eV.     

The Orion Water-Hardness Electrode: An Unexpected Response to Magnesium Ion

Abstract

The Orion water-hardness electrode, while being used to measure magnesium ion activity in a series of calcium-free solutions, displayed some unanticipated changes in potential. As the overall potential change observed for one solution was 183 mV (equivalent to more than six orders of magnitude changes in magnesium-ion activity), several precautions are suggested which should be observed when using this electrode for specific purposes. In particular, it is recommended that the exchanger be pre-equilibrated with an appropriate solution if the electrode is to be used in restricted systems of known chemical composition.     

Die Untersuchung einer Laboratoriumsanlage nach dem Heiß-Kalt-System mit einfachem Durchfluß der Fluide

Es wird ein Heiβ-Kalt-System mit einfachem Durchfluβ der Fluide untersucht. Dabei wird gezeigt, daβ zwischen den Isotopenkonzentrationen des Gases und der Flüssigkeit lineare Beziehungen bestehen. Eine Möglichkeit zur experimentellen Bestimmung der realen Werte der Parameter der Kolonne wird angegeben.     

Facile synthesis of pH‐responsive glycopolypeptides with adjustable sugar density

Well‐defined pH‐responsive glycopolypeptides were prepared by polymer‐analogous aqueous amide coupling of d ‐glucosamine to poly(α,l ‐glutamic acid) (PGA) using the coupling agent 4‐(4,6‐dimethoxy‐1,3,5‐triazin‐2‐yl)‐4‐methylmorpholinium chloride (DMT‐MM) without any organic solvents, additives, or buffers. Degrees of substitution (DS) up to 80% can be achieved, and the DS is adjustable by the molar ratio of DMT‐MM to PGA repeating units. Successful glycosylation of both low MW and high MW PGA was confirmed by ¹H NMR and FTIR spectroscopy as well as by an enhanced solubility at low pH. CD spectroscopy revealed that glycosylated PGAs with a DS up to 0.63 are able to undergo a pH‐responsive and reversible helix‐coil transition. However, for polymers with higher DS no transition occurs. A comparison with PGAs functionalized with monoethanolamine showed that the low helicity at high DS is not a steric effect due to the bulky sugar moieties, but a solvation effect. Preliminary turbidimetric tests with the lectin Concanavalin A indicate a biological activity of these glycosylated polypeptides. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3925–3931     

Poly(amidoamine)s: Past,present, and perspectives

Poly(amidoamine)s (PAAs) are a family of synthetic polymers obtained by stepwise polyaddition of prim‐ or sec‐amines to bisacrylamides. Nearly all conceivable bisacrylamides and prim‐ or sec‐amines can be employed as monomers endowing PAAs of a structural versatility nearly unique among stepwise polyaddition polymers. PAAs are degradable in aqueous media, including physiological fluids. Many of them are remarkably biocompatible notwithstanding their cationic character. PAAs are per se highly functional polymers and, in addition, can be further functionalized giving rise to an endless variety of polymeric structures meeting the requisites for applications in such apparently disparate fields as inorganic water pollutants scavengers, sensors, drug and protein intracellular carriers, transfection promoters, peptidomimetic antiviral and antimalarial agents. In this review, the unique chemistry of PAAs is discussed and a vast library of PAA structures and PAA applications from the beginning to the present days reported. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2319–2353     

Sampling and Analysis of Odorous Compounds in Water Treatment Plants

Abstract

The following analytical method has been used to identify some odorous compounds in the air of the water treatment plant Werdholzli, Zurich: sampling of contaminated air with the help of activated carbon, desorption by the solvents carbon disulphide and methylene chloride, separation of the carbon disulfide extract into a polar and a nonpolar fraction by adsorption column chromatography on silica. Hereafter gaschromatographic analysis of the polar fraction on glass capillary column (Ucon HB 5100); detection and identification were achieved by flame ionisation, thermoionic nitrogen selective detector and computerized mass spectrometry (Finnigan 3200 F, data system 6110).

The results show the presence of sulfur compounds: thiophenes, thiazoles; nitrogen compounds: pyrazines; oxygen compounds: phenols, alcohols and some unsatured hydrocarbons. The malodorous compounds were sulfur and nitrogen compounds in the range of 0.01-0.1 ppm.     

GasChromatography of Amino Acids as their N-Trifluoroacetyl Methyl Esters and Comparison with the Ion-exchange Method in Maize and Oats

A method for the preparation of N-trifluoroacetyl methyl esters of amino acids has been developed, permitting the separation and determination of 20 amino acids by temperature-programmed gas chromatography on two columns. The method was applied to the analysis of the amino acids in hydrolyzed maize and in hydrolyzed oats, where a direct comparison was made with the ion-exchange method.     

Solid-Phase Extraction and Capillary Gas Chromatographic Determination of Triazine Herbicides in Water

Abstract

A facile and efficient method is described for the determination of trace quantities of triazine herbicides, terbutryn, prometryn and ametryn in water. The procedure involved preconcentration of water samples by sorption on chromatographic grade silica gel particles with chemically modified surface, being covalently bonded with a nonofunctional C₈H₁₇ group. This was followed by solvent desorption with 2-propanol. The determinative step was achieved by capillary gas chromatography on Supelcowax-10 fused silica column using a nitrogen-phosphorus detector. The limit of detection was 0.1 μg-10 μgL^?1.     

Determination of Cadmium and Lead in Sea Water after Extraction Using Electrothermal Atomisation. Minimisation of Interferences from Co-Extracted Sea Salts

Abstract

Interferences from small amounts of sea salt in the determination of cadmium and lead were investigated. Test samples were made to mimic solutions obtained after extraction of sea water for trace metal analysis. Sea salt concentrations in the range 0–400 mg/l were investigated. Background absorption from this salt was high but easily minimised through the addition of nitric acid (2 % v/v). Sensitivity reductions due to the salt were considerable and varied from one graphite tube to the other. This problem was overcome by the addition of 1000 mg lanthanum per litre of sample. The positive effect of the lanthanum matrix modification is thought to be due to a change of the graphite tube surface.