无线传感器网络中继节点布居算法的研究

本文表述的是在该应用背景下引入多约束条件, 并采用枚举法与贪婪寻优算法相结合的方法, 解决了在可以作为中继节点设置位置的预设中继节点位置集合内, 合理选择中继节点设置位置以及既存网络因添加新传感器节点所引起的中继节点追加的问题. 仿真实验表明, 本文提出的中继节点布居与追加优化算法能够保证多约束条件下网络的容错性. 同时提出的基于最小网络距离因子评价标准, 有效提高了中继节点布居算法的能效性.     

考虑最佳入口温度的多股流换热器网络循环优化

针对于多股流换热器网络的应用优势,本文在衍生网络优化方法基础上,提出了考虑最佳入口温度的多股流换热器循环优化方法,即利用多股流换热器网络小面积换热器合并而不产生固定投资费用这一特点,将优化结果中存在公用工程的流体返回到另一种流体的入口并与其入口流体进行循环优化。结果表明,这种优化方法能够进一步发挥多股流换热器网络的优点,得到年综合费用更小、运行费用更低的网络结构。     

基于遗传LM算法的涂层目标光谱偏振BRDF建模分析

通过比较测量方法测量得到绿漆涂层木板探测目标在400～720 nm的光谱偏振二向反射分布函数值,从获得的户外试验测量数据入手,分析与探测角、波长之间的关系,通过有限探测条件得到的光谱偏振二向反射分布函数值(BRDF)建立光谱偏振BRDF模型,来描述探测目标的偏振二向反射特性。其中利用基于小面元的模型建立光谱偏振BRDF模型,利用遗传算法和Levenberg-Marquardt(LM)算法相结合的优化算法来获得非线性模型参数。仿真实验结果表明采用的遗传LM优化算法具有较好的性能,能较快较准确得到非线性的模型参数。真实实验数据证明了基于小面元模型的正确性,表明光谱偏振二向反射分布函数建模方法结果的可靠性。最后与绿漆涂层铁板目标的模型反演参数进行比较得出：2种不同材质、相同颜色涂层的目标,具有较为接近的折射率,其较小差别可以理解为由涂层的厚度、均匀程度的不同导致,而非不同的材质所引起。     

Evaluation and prediction of the degradation of space Si solar cells induced by a low-earth-orbit radiation environment

Space-graded silicon solar cells are evaluated by 1 MeV and 2 MeV electron-irradiation. The mean degradation of the maximum power (P_max) is presented and analyzed. The degradation at both electron energies has been correlated with the displacement damage dose (D_d). A good linearity between the electron D_d and the mean P_max degradation is obtained. The concept of D_d has also been used to predict the Si solar cell response in a low-earth-orbit (Altitude 799 km, Inclination 99^o) radiation environment, considering the shielded effect of a 120 μ m-thick silica coverglass on reducing the radiation. Compared with the on-orbit data from a Si solar array of a Chinese satellite (duration from April 2007 to July 2010), a good match can be found between the on-orbit data and the predicted results using D_d methodology, indicating the method is appropriate for evaluating the radiation damage of the solar cells, and also to provide a new technique for studying radiation effects on the optoelectronic detectors used in many high energy physics applications, where harsh radiation environments produce damage in optoelectronic device materials.     

操作参数对PEM燃料电池中水迁移的影响

质子膜内水分和阴极多孔电极中液态水含量是PEM燃料电池正常运行的控制因素。本文给出了一个用于研究PEM燃料电池内水迁移的稳态、等温、两相流模型。模型耦合了连续方程、动量守恒方程和物质守恒方程,以及水在质子膜中传递方程。运用试验结果验证了模型的有效性。分析模拟结果表明,增大系统操作压力、升高电池操作温度和降低加湿温度将会使质子膜中水的净迁移通量增大;增大操作压力、降低操作温度和升高加湿温度会增加阴极CTL与GDL界面上液态水含量。     

压缩空气蓄能(CAES)系统集成及性能计算

压缩空气蓄能(CAES)系统是一种新型电能存储系统,具有动态响应快、经济性能高、环境污染小等优点,可起到负荷平衡、战略规划、提高供电质量的作用。CAES系统包括空气压缩机、电动机/发电机、地下贮气室、换热器、燃烧室、燃气轮机等常用设备,可分为两个子系统,分别是蓄能子系统和发电子系统,通过对设备采取不同组态,可得到不同方案系统。本文将结合当前CAES发展的新技术,提出CAES系统的集成方案并进行相应的计算与优化。     

Circulation model for water circulation and purification in a water Cerenkov detector

Owing to its low cost and good transparency, highly purified water is widely used as a medium in large water Cerenkov detector experiments. The water circulation and purification system is usually needed to keep the water in good quality. In this work, a practical circulation model is built to describe the variation of the water resistivity in the circulation process and compared with the data obtained from a prototype experiment. The successful test of the model makes it useful in the future design and optimization of the circulation/purification system.     

The optimal path of piston motion for Otto cycle with linear phenomenological heat transfer law

An Otto cycle engine with internal and external irreversibilities of friction and heat leakage, in which the heat transfer between the working fluid and the environment obeys linear phenomenological heat transfer law [q ∝△(T -1)], is studied in this paper. The optimal piston motion trajectory for maximizing the work output per cycle is derived for the fixed total cycle time and fuel consumed per cycle. Optimal control theory is applied to determine the optimal piston trajectories for the cases of with and w...     

频率自适应最优权重阵列干涉条纹处理技术

考虑长基线水平阵列波束形成对声场模态呈现的滤波特征,建立了一种随频率改变滤波通带的阵列权矢量设计方法。基于简正波理论,结合声场波束形成特点,在分析了常规波束形成信号LOFAR谱图干涉条纹的清晰度和条纹结构不同于单水听器输出信号条纹现象基础上,采用线性等式约束的二次优化模型,给出了一种频率自适应的最优权重估计。数值仿真验证和试验数据分析表明,利用该方法设计的最优权重阵列波束处理,可以滤波出SRBR(Surface-Reflected Bottom-Reflected)或N-SRBR(Non-Surface-Reflected Bottom-Reflected)模态组成的波束形成信号,信号谱图干涉条纹斜率与理论分析基本一致。     

Simulation of water potential for the electronic structureof serine

First-principles, all-electron, \textit{ab initio} calculations have been performed to construct an equivalent water potential for the electronic structure of serine (Ser) in solution. The calculation is composed of three steps. The first step is to search for the configuration of the Ser + NH₂O system with a minimum energy. The second step is to calculate the electronic structure of Ser with the water molecule potential via the self-consistent cluster-embedding method (SCCE), based on the result obtained in the first step. The last step is to calculate the electronic structure of Ser with the dipole potential after replacing the water molecules with dipoles. The results show that the occupied states of Ser are raised by about 0.017~Ry on average due to the effect of water. The water effect can be successfully simulated by using the dipole potential. The obtained equivalent potential can be applied directly to the electronic structure calculation of protein in solution by using the SCCE method.