Determination of Labile Iron at Low nmol L−1 Levels in Estuarine and Coastal Waters by Anodic Stripping Voltammetry

A new method is presented for the determination of electrochemically labile iron in estuarine and coastal seawater. The method is based on differential pulse anodic stripping voltammetry (DPASV) at a rotating silver‐alloy disk electrode. The voltammetric parameters include a plating potential of ?1.5 V and an activation potential of ?5 V for 10s; the seawater is at the original sample pH. The main finding is the presence of a peak for low nmol L^?1 levels of iron at ?0.55 V ascribed to elemental iron deposited on the bare silver alloy electrode. The peak increased linearly with the iron concentration between <1 and 14 nmol L^?1 using a 900 s plating time. At higher concentrations an additional iron peak appeared at ?0.7 V which was also found to increase linearly with the iron concentration but at a higher concentration range from ca. 15 to 90 nmol L^?1 using a 300 s plating time. The second peak was ascribed to iron deposited on iron. Additions of chelating agents (EDTA and a siderophore) to seawater caused the iron peak to be masked indicating that this method is suitable for iron speciation as only the electrochemically labile fraction is determined. The detection limit was 0.3 nmol L^?1 using a 900 s plating time. The method was used to determine iron in the range of 5 to 50 nmol L^?1 in samples from the Mersey estuary near Liverpool and its potential use for in situ monitoring was demonstrated by using it to monitor labile iron (at 2–3 nmol L^?1) over a period of 4 days at 1 h intervals in coastal waters in the Trondheim fjord, Norway.     

Fitting complex potential energy surfaces to simple model potentials: application of the simplex-annealing method

A stochastic method of optimization, which combines simulated annealing with simplex, is implemented to fit the parameters of a simple model potential. The main characteristic of the method is that it explores the whole space of the parameters of the model potential, and therefore it is very efficient in locating the global minimum of the cost function, in addition to being independent of the initial guess of the parameters. The method is employed to fit the complex intermolecular potential energy surface of the dimer of water, using as a reference the spectroscopic quality anisotropic site-site potential of Feller et al. The simple model potential chosen for its reparameterization is the MCY model potential of Clementi et al. The quality of the fit is assessed by comparing the geometry of the minimum, the harmonic frequencies, and the second virial coefficients of the parameterized potential with the reference one. Finally, to prove more rigorously the robustness of this method, it is compared with standard nonstochastic methods of optimization.     

有机溶剂性质及其水含量对酶催化合成含D－氨基酸残基的二肽衍生物的影响

有机溶剂性质及其水含量对酶催化合成保护的寡肽及其衍生物有显著影响。系 统地研究了有机溶剂性质及在不同有机溶剂中水含量对α－胰凝乳蛋白酶催化合成 含D－氨基酸残基的二肽衍生物产率的影响。用α－胰凝乳蛋白酶、枯草杆菌蛋白 酶和嗜热杆菌蛋白酶在有机溶剂中催化合成了一系列保护的二肽及其衍生物，并研 究了水含量对反应产率的影响，得到了十分有意义的结果。     

The preparation of a cabbage reference material for environmental monitoring and food analysis

 Cabbage is frequently used in environmental monitoring and food control, and, hence, cabbage reference materials (RMs) are required for ensuring quality assurance. A cabbage RM was prepared in view of certification of specific elements from the "black list" of high toxicological interest and nutritive importance. All tasks of the RM production (production of the plant material, cutting and freeze-drying, determination of the residual water content, preparation of the RM, homogeneity testing, stability testing, certification measurements) are described in detail. Received: 12 November 1999 / Accepted: 29 January 2000     

Crystal hydrates: an investigation of the use of crystal hydrates as stationary phases in gas chromatography

Summary The use of crystallohydrates, crystallohydrate solutions and melts as stationary phases in gas chromatography has been proposed. Crystallohydrates have been shown to display high selectivity in the separation of polar organic compounds when use is made of water vapours as the mobile phase. Some aspects of gas-liquid chromatography in water vapours and with the stationary phase comprising crystallohydrates have been studied, and the preliminary results obtained point to the desirability of further progress in this field.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Method Development for the Speciation of Chromium in River and Industrial Wastewater Using GFAAS

A simple, sensitive and inexpensive method for the speciation of Cr(VI) and Cr(III) in river and industrial wastewater was developed, optimized and validated. Samples were collected, filtered and then chromium species were determined in the filtrate. In the filtrate, total Cr was determined directly by Graphite Furnace Atomic Absorption Spectrometry (GFAAS). A portion of the filtered sample was buffered to pH 6.4, extracted with Amberlite LA-2/MIBK and finally Cr(VI) was determined in the organic extract and Cr(III) in the aqueous phase using GFAAS. The method was evaluated by analysis of the certified reference material, CRM 544, and good accuracy was obtained. The limit of detection for Cr(VI) and Cr(tot)/Cr(III) was found to be 0.30 and 0.08 µg L⁻¹, respectively, and a precision expressed as relative standard deviation of better than 11% was achieved for nine replicates. A number of water samples from the Tinishu Akaki River, Ethiopia, and wastewater samples from a chemical plant in Germany, were analysed. In addition to the GFAAS method, Cr(tot) was also determined using ICP-MS (in CRM 544, lyophilized water, and Tinishu Akaki River water samples) and Cr(tot) and Cr(VI) using UV-VIS spectrophotometry (in CRM 544 and industrial wastewater samples). Good agreement between the different methods was found.     

ViscosityB-coefficients,structural entropies and heat capacities,and the effects of ions on the structure of water

The water-structural contributions to the entropies and heat capacities of hydration of over 120 ions and the viscosity B-coefficients of nearly 80 aqueous ions are tabulated and correlated. B-coefficients for many more ions are predicted from this relationship and from their dependence on ionic size and charge. The structural entropies determine a unique scale of water structure making and breaking by the ions.     

Heats of solution of gaseous hydrocarbons in water at 25°C

The heats of solution at 25°C for a number of hydrocarbon gases are reported as measured by a calorimetric method. There is excellent agreement between the standard enthalpy changes of solution measured calorimetrically and those derived from high precision temperature dependent solubility measurements. However the calorimetrically determined standard enthalpies of solution of a number of gases are greatly improved over values obtained from low precision temperature dependent solubility measurements. A method is presented to readily estimate the standard errors in the standard enthalpy change for any process derived from the temperature dependence of the equilibrium constant for the process. Comparison of the standard enthalpies and entropies of solution of hydrocarbon gases in water shows that the standard free energies of solution for all hydrocarbon gases investigated are dominated by unfavorable entropy contributions. A strong linear correlation between the standard entropy of solution and the number of hydrogens in the hydrocarbon molecule is found. This correlation suggests that the hydrocarbon hydrophobic effect is regulated by the number of allowable configurations of a water molecule in contact with each C–H group.     

水/有机两相体系中催化氧化反应的研究进展

论述了水／有机两相体系中催化氧化反应的一些最新进展。由于采用水溶性催化剂，使得水／有机两相体系中的催化反应具有催化剂与产物容易分离的优点。阐述了水溶性催化剂在催化氧化反应中的应用，列举了一些典型的水溶性配体、水溶性催化剂以及催化氧化反应实例。参考文献21篇。     

以水、甲苯及其混合溶剂超临界萃取煤的研究

在半连续萃取装置上,以水、甲苯及其混合物为溶剂对黄县褐煤进行了非等温超临界萃取,考察了不同溶剂对萃取过程的影响。结果表明,以甲苯为溶剂的萃取率高于以水为溶剂的。以水为溶剂萃取物中的沥青烯和预沥青烯的H/C原子比高于以甲苯为溶剂的,而O/C原子比则低。在水中加入适量甲苯,能够明显改善萃取效果,大幅度提高萃取率。