Determination of Phenolic Compounds Based on Co‐Immobilization of Methylene Blue and HRP on Multi‐Wall Carbon Nanotubes

This work evaluated an amperometric biosensor based on multi‐wall carbon nanotubes (MWCNT), chemically modified with methylene blue (Met) and horseradish peroxidase (HRP), for detection of phenolic compounds. The dependences of the biosensor response due to the enzyme immobilization procedure, HRP amounts, pH and working potential were investigated. The amperometric response for catechol using the proposed biosensor showed a very wide linear response range (1 to 150 μmol L^?1), good sensitivity (50 nA cm^?2 μmol^?1 L), excellent operational stability (after 300 determinations the response remained at 97%) and very good storage stability (lifetime>3 months). Based on all these characteristics, it is possible to affirm that the material is promising for phenol detection due to its good electrochemical response and enzyme stabilization. The biosensor response for various phenolic compounds was investigated.     

Tying together the ultrastructural modifications of wood fibre induced by pulping processes with the mechanical properties of paper

The composition and ultrastructural arrangement of cell wall polymers in wood fibres have determining influence on the properties of wood derived materials. It is therefore important to improve our understanding of the relationship between fibres organisation, the modifications induced by pulping treatments, and the resulting paper sheet mechanical properties. The different treatments to which fibres are subjected during the manufacturing of pulps and papers induce morphological and micro-structural alterations due to the removal of wall constituents and of microfibrillar elements. The impact of pulping processes on fibres was investigated at the ultrastructural scale of transmission electron microscopy. Particular attention was given to the effects of beating in refiners at various intensities on the ultrastructure of fibres. The most characteristic effects consisted of delaminations, microfibril disorganisation, and even fractures, of varying importance depending on the intensity of the mechanical refining. The consequences of internal alterations and surface modifications of the fibres were examined in relation to the paper sheet mechanical properties. Correlations between the type of alteration observed in the fibres and its possible impact on a given paper mechanical property are suggested. With similar approaches, the effects of drying and recycling were studied.     

合成甲醇的催化剂Rh-ZnO/MWNTs的研究

研究新型的由多壁碳纳米管(MWNTs)负载的， ZnO助催的铑基甲醇合成催化剂. 当铑含量达到4％(w)时，催化剂具有较高的比表面积(99.6 m2•g－1), 催化剂的反应活化能为68.8 kJ•mol－1.在563 K, 1 MPa下，催化剂的最高催化活性和甲醇选择性分别为411.4 mg/gcat.•h和96.7％. TEM、TPR和TPD等表征结果显示，碳纳米管能增加Rh在催化剂表面的分散度，提高催化剂的还原温度并能增加氢物种的吸附量，这些结果将有助于更好地了解催化剂中各组分间的协同作用和催化活性中心本质.     

Must thermodynamic functions be piecewise analytic?

There seems to be no general theoretical argument to support the idea that thermodynamic functions are piecewise analytic. We suggest that nonanalyticity may be associated with Gibbs states which are quasiperiodic under space translations, or have a more general nonperiodic (turbulent) behavior.     

An investigation of glasses for capillary chromatography

An investigation was conducted of various glasses, other than soda lime or borosilicate, for use in glass capillary gas chromatography. The work has uncovered some unique chromatographic qualities in the use of potash soda lead and fused silica glasses as materials for making glass capillary columns. The fused silica proved to be an ideal material for capillary column construction, being inherently more inert than glass containing metal oxides. It has been shown that through the use of thin wall capillary tubing of high flexibility many of the mechanical problems associated with glass capillary columns, such as fragility and column straightening, can be avoided.     

Influence of the variable wall thickness of the sample tubes and a quartz Dewar on the EPR signal intensity in a single TE102 and double TE104 rectangular cavity

The response of a single TE₁₀₂ and double TE₁₀₄ rectangular cavity to the insertion of samples contained in tubes with variable wall thickness and a quartz Dewar into the cavity has been analyzed. A direct, indirect, and concurrent (positive or negative) “lens effect” inside the double TE₁₀₄ rectangular cavity is discussed. The experimental dependence of the EPR signal intensity on the wall thickness of the sample tube, δ, for the line-like samples with identical length of the sample material column, L=30 mm, recorded in the microwave cavity showed a directly proportional increase of the relative “lens effect” with the increase of the wall thickness of the tube in the interval, δ∈<0.1 mm, >0.5 mm. The insertion of the variable-temperature double-wall quartz Dewar (home-built, resonant frequency shift, ca. −300 MHz) into the single TE₁₀₂ rectangular cavity showed the same relative “lens effect”, with ca. 1.5-time increase of the EPR signal intensity, for a point-like sample and the line-like samples with material columns of diameter of 1 and 1.3 mm, and wall thickness of the sample tubes, δ∈<0.1 mm, >0.5 mm. The increased effect of the Dewar arises because the active volume of the quartz Dewar tube walls is always much more larger than the active volume of the sample tube wall. In the case of the double TE₁₀₄ rectangular cavity, the insertion of the quartz Dewar: (i) into the same cavity, in which the sample is present, caused a direct “lens effect”, with ca. 1.8-fold increase of the EPR signal intensity; however, (ii) into the complementary cavity, in which the sample is absent, caused an indirect “lens effect”, with ca. 0.6-fold decrease of the EPR signal intensity. With the Dewar and sample in one cavity and a large empty sample tube in the complementary cavity, a concurrent (positive or negative) “lens effect” can be observed. Thus, the possible increase/decrease of the EPR signal intensity depends on the volume ratio of the quartz Dewar tube walls and large sample tube wall inserted into the double TE₁₀₄ rectangular cavity. Each of the above phenomena may be a significant source error in quantitative EPR spectrometry unless the samples to be compared in the quantitative EPR analysis are contained in sample tubes having the same wall thickness and each EPR spectra should be recorded inside an identical quartz Dewar.     

Toward low‐noise synthetic turbulent inflow conditions for aeroacoustic calculations

The accuracy of boundary conditions for computational aeroacoustics is a well‐known challenge, due in part to the necessity of truncating the flow domain and replacing the analytical boundary conditions at infinity with numerical boundary conditions. In particular, the inflow boundary condition involving turbulent velocity or scalar fields is likely to introduce spurious waves into the domain, therefore degrading the flow behavior and deteriorating the physical acoustic waves. In this work, a method to generate low‐noise, divergence‐free, synthetic turbulence for inflow boundary conditions is proposed. It relies on the classical view of turbulence as a superposition of random eddies convected with the mean flow. Within the proposed model, the vector potential and the requirement that the individual eddies must satisfy the linearized momentum equations about the mean flow are used. The model is tested using isolated eddies convected through the inflow boundary and an experimental benchmark data for spatially decaying isotropic turbulence. Copyright © 2013 John Wiley & Sons, Ltd.     

Study of the purifying affects of thermal annealing for polymer‐wall liquid crystal cells

The thermal annealing process was proposed to purify the pixel regions of a liquid crystal (LC) cell with polymer walls. This technique, based on thermal‐induced phase separation, successfully evicts the residual monomers from the LC volume and significantly improves electro‐optical properties of the polymer‐wall LC devices. The influence of the annealing process on the purity of LC‐rich domain and the electro‐optic properties of a LC cell was explored with a series of experiments. According to the experimental results, the annealing technique is extremely prospective for constructing flexible polymer‐wall LC display applications.     

Dynamic release process of pollutants during suspended sediment transport in aquatic system

Pollutants release is highly consistent with suspended sediment concentration （SSC） in water column, especially during re-suspension and transport events. The present research focuses on pollutant dynamic release from re-suspended sediment, especially the vertical distribution relationship between them. The sediment erosion experiments on a series of uniform flow are conducted in a circulate flume. Reactive tracer （phosphorus） is used as the contaminant in fine-grained sediments to identify the release characteristic length and time. Experimental results show that the flow condition near-bed depends on the sediment surface roughness. The region with high turbulent intensities corresponds to a high concentration sediment layer. In addition, the SSC decreases with the distance, water depth, and particle grain size. The sediment in a smaller grain size takes much more time to reach equilibrium concentration. Total phosphorus （TP） concentration changes along the water depth as SSC in the initial re-suspension stage, appearing in two obvious concentration regimes： the upper low-concentration layer and the high-concentration near-bottom layer. This layered phenomenon remains for about 3 hours until SSC distri- bution tends to be uniform. Longitudinal desorption plays an important role in long-way transport to reduce the amount of suspended sediment in water column.     

Birth–death process of local structures in defect turbulence described by the one-dimensional complex Ginzburg–Landau equation

Defect turbulence described by the one-dimensional complex Ginzburg–Landau equation is investigated and analyzed via a birth–death process of the local structures composed of defects, holes, and modulated amplitude waves (MAWs). All the number statistics of each local structure, in its stationary state, are subjected to Poisson statistics. In addition, the probability density functions of interarrival times of defects, lifetimes of holes, and MAWs show the existence of long-memory and some characteristic time scales caused by zigzag motions of oscillating traveling holes. The corresponding stochastic process for these observations is fully described by a non-Markovian master equation.