厚壁管道周向导波检测技术实验研究

厚壁管道是火电机组四大管道系统的核心部件,将超声导波技术应用于厚壁管道的无损检测显得十分重要.首先确定厚壁管道检测的激励方式,优化选取适合厚壁管道检测的0.5MHz探头和楔形块角度为60°的斜探头组合.通过改变斜探头与外壁轴向缺陷之间周向距离,在一定范围内仍可检测到缺陷回波,且接收到的周向回波幅值变化不大,表明周向导波...     

带阻尼项的三阶脉冲微分方程的振动性与渐近性

解决了一类带阻尼项的三阶脉冲微分方程的非振动解与其一阶、二阶导数的符号关系,用迭代法得到其振动性与渐近性的判别准则,并举例说明准则的有效性.     

冲击电流计线圈运动状态的分析

简要介绍了冲击电流计的工作原理,分析研究了冲击电流计的偏转线圈在磁场中的运动状态,并运用数理方法和电磁学知识推导出描述各种运动状态的物理表达式,揭示出偏转线圈的运动规律,对于仪器的调节和实验电路的设计具有重要意义.     

High Hydrostatic Pressure to Increase the Biosynthesis and Extraction of Phenolic Compounds in Food: A Review

Phenolic compounds from fruits and vegetables have shown antioxidant, anticancer, anti-inflammatory, among other beneficial properties for human health. All these benefits have motivated multiple studies about preserving, extracting, and even increasing the concentration of these compounds in foods. A diverse group of vegetable products treated with High Hydrostatic Pressure (HHP) at different pressure and time have shown higher phenolic content than their untreated counterparts. The increments have been associated with an improvement in their extraction from cellular tissues and even with the activation of the biosynthetic pathway for their production. The application of HHP from 500 to 600 MPa, has been shown to cause cell wall disruption facilitating the release of phenolic compounds from cell compartments. HPP treatments ranging from 15 to 100 MPa during 10–20 min at room temperature have produced changes in phenolic biosynthesis with increments up to 155%. This review analyzes the use of HHP as a method to increase the phenolic content in vegetable systems. Phenolic content changes are associated with either an immediate stress response, with a consequent improvement in their extraction from cellular tissues, or a late stress response that activates the biosynthetic pathways of phenolics in plants.     

单层碳纳米管修饰电极上盐酸曲普利啶的电化学行为及其应用研究

应用循环伏安法研究了盐酸曲普利啶在碳纳米管修饰电极上的电化学行为.结果表明:在0.1 mol/L磷酸盐缓冲溶液(pH 6.9)中,盐酸曲普利啶产生一灵敏的氧化峰,其峰电位为0.81 V(vs.Ag/AgCl),峰电流与盐酸曲普利啶在1.0×10-6～1.3×10-4 mol/L浓度范围内呈线性关系,检出限为5.0×10-7mol/L,已用于片剂中盐酸曲普利啶的测定.     

高效耗能黏弹性阻尼框架结构减震性能研究

提出了高效耗能黏弹性阻尼器,研究了该阻尼器对框架结构的减震机理。首先给出了高效耗能黏弹性阻尼器的结构构造,推导了小震、大震与巨震作用下的阻尼放大系数计算公式,由此分析了该放大系数的变化规律。此外,还推导了设置高效耗能黏弹性阻尼框架结构的等效阻尼比。分析表明,框架结构设置高效耗能黏弹性阻尼器在阻尼等效前后顶部位移反应时程曲线相差不超过10%。     

Bunch transverse emittance increase in electron storage rings

In this paper a theoretical framework to estimate the bunch transverse emittance growing in electron storage rings due to short range transverse wakefield of the machine is established. New equilibrium emittance equations are derived and applied to explain the experimentally obtained results in ATF damping ring. This equation will be useful for linear collider damping ring design.     

光磁共振实验中壁弛豫过程与外磁场的关系

利用改进后的DH807型光磁共振实验装置,在静态磁场下精确测量了抽运信号的弛豫饱和值与外磁场的关系,从而得到壁弛豫速率与外磁场的关系,并建立模型对其原理进行了探讨.     

电磁阻尼落体运动实验仪研究

设计了电磁阻尼落体实验仪,可以定量研究受电磁阻尼的落体运动过程,在不同的阻尼条件下验证速度和路程公式,并计算出阻尼系数.     

Free (open) boundary condition: some experiences with viscous flow simulations

The free (or open) boundary condition (FBC, OBC) was proposed by Papanastasiou et al. (A new outflow boundary condition, International Journal for Numerical Methods in Fluids, 1992; 14:587–608) to handle truncated domains with synthetic boundaries where the outflow conditions are unknown. In the present work, implementation of the FBC has been tested in several benchmark problems of viscous flow in fluid mechanics. The FEM is used to provide numerical results for both cases of planar and axisymmetric domains under laminar, isothermal or non‐isothermal, steady‐state conditions, for Newtonian fluids. The effects of inertia, gravity, compressibility, pressure dependence of the viscosity, slip at the wall, and surface tension are all considered individually in the extrudate‐swell benchmark problem for a wide range of the relevant parameters. The present results extend previous ones regarding the applicability of the FBC and show cases where the FBC is inappropriate, namely in the extrudate‐swell problem with gravity or surface‐tension effects. Particular emphasis has been given to the pressure at the outflow, which is the most sensitive quantity of the computations. In all cases where FBC is appropriate, excellent agreement has been found in comparisons with results from very long domains. The formulation for Picard‐type iterations is given in some detail, and the differences with the Newton–Raphson formulation are highlighted regarding some computational aspects. Copyright © 2011 John Wiley & Sons, Ltd.