Miniaturization of separation techniques using planar chip technology

Miniaturization of separation columns implies equally reduced vol- umes of injectors, detectors, and the connecting channels. Planar chip technology provides a powerful means for the fabrication of micron-sized structures such as channels. This is demonstrated by two examples. An optical absorbance detector chip exhibits the expected behavior of a 1 mm optical path length cell despite its volume of 1 nL. A capillary electrophoresis device allows integrated injections of 100 pL samples, efficiencies of 70,000 to 160,000 theoretical plates in 10 to 20 seconds, and external laser-induced fluorescence detection at any capillary length of choice between 5 and 50 mm.     

固液相变的分子动力学研究Ⅰ─—(KI)_(108)离子簇的熔化和凝固(英)

通过分子动力学模拟，考查并分析了（KI）108离子簇的结构、能量和相变的动力学行为．在加热和冷却过程中，离子簇再现了熔化和凝固现象，而且熔化起始于立方体的其一顶点，熔化的离子簇不是球形的，说明了离子簇的非湿特征．根据结晶的成核速率，讨论了电子衍射实验中观察KI凝固的可能性     

Prediction of the net retention volumes in gas chromatography using porous polymers coated with different stationary phases

Summary A new expression which permits the prediction of the net retention volumes in gas chromatography with column packings of coated porous polymers is reported. The porous polymers Chromosorb 101 and Chromosorb 102 were used as supports and squalane, Ethofat and Carbowax 20M as stationary phases at three different column temperatures of 80°C, 100°C and 150°C. Several organic compounds of various polarity were used as test compounds and the net retention volumes, V_Ntheor, have been calculated according to this new expression. The V_Ntheor values were compared with the experimental net retention volumes, V_Nexp, and it was found that the difference between these two values is dependent on the type of compound and column packing. Nevertheless, the elution order could be predicted in most cases.     

Excess Molar Volume and Viscosity of Isobutyric Acid + Water Binary Mixtures Near and Far Away from the Critical Temperature

The excess molar volume V^E, shear viscosity deviation Δη and excess Gibbs energy of activation ΔG^∗E of viscous flow have been investigated by using density (ρ) and shear viscosity (η) measurements for isobutyric acid + water (IBA+W) mixtures over the entire range of mole fractions at five different temperatures, both near and close to the critical temperature (2.055K ≤ (T−T_c)≤ 13.055K). The results were also fitted with the Redlich–Kister equation. This system exhibited very large negative values of V^E and very large positive values of Δη due to increased hydrogen bonding interactions and correlation length between unlike molecules in the critical region and to very large differences between the molar volumes of the pure components at low temperatures. The activation parameters ΔH^∗ and ΔS^∗ have been also calculated and show that the critical region has an important effect on the volumetric properties.     

Optical CO(2) sensor of the combination of colorimetric change of alpha-naphtholphthalein in poly(isobutyl methacrylate) and fluorescent porphyrin in polystyrene

An optical CO₂ sensor based on the overlay of the CO₂ induced absorbance change of pH indicator dye α-naphtholphthalein in poly(isobutyl methacrylate) (polyIBM) layer with the fluorescence of tetraphenylporphyrin (TPP) in polystyrene layer is developed. The observed luminescence intensity from TPP at 655 nm increased with increasing the CO₂ concentration. The ratio I₁₀₀/I₀ value of the sensing film consisting of α-naphtholphthalein in polyIBM and TPP in polystyrene layer, where I₀ and I₁₀₀ represent the detected luminescence intensities from a layer exposed to argon and CO₂ saturated conditions, respectively, that the sensitivity of the sensor, is estimated to be 192. The response and recovery times of the sensing film are less than 6.0 s for switching from argon to CO₂, and for switching from CO₂ to argon. The signal changes are fully reversible and no hysterisis is observed during the measurements. The highly sensitive optical CO₂ sensor based on fluorescence intensity changes of TPP due to the absorption change of α-naphtholphthalein in polyIBM layer with CO₂ is achieved.     

The ionization of perchloric and hydrofluoric acids in aqueous solution

Cyclical bifurcated hydrogen bonded structures are proposed for aqueous solutions of hydrofluoric acid and for the bifluoride ion which are consistent with the spectral data. The structure proposed for HF is also applicable to solutions in organic solvents. Raman spectra of tetramethylguanidinium perchlorate suggest that the corresponding Raman spectra of perchloric acid solutions may not be interpreted in terms of a completely dissociated acid. Other evidence including activity coefficient, heat capacity and partial molal volume data suggest that there is some association in relatively dilute perchloric acid solutions between the perchlorate ion and the hydrated proton. This association decreases in concentrated aqueous solutions.     

Volume and heat capacity of model non-aqueous self-assembly systems

Blends of immiscible polymers are often stabilized by block copolymers which can form non-aqueous micelles and microemulsions in the liquid polymers. The phase diagrans, apparent volumes and apparent heat capacities of model non-aqueous binary and ternary systems were studied in order to investigate the conditions under which such self-assembly systems could form. 1,2-Hexanediol, which can cosolubilize hexane and ethyleneglycol, forms inverse micelles in hexane and weak microaggregates in ethyleneglycol. Genapol X-060, a commercial alcoholic surfactant containing on the average an aliphatic chain of 13 carbons and 6 oxyethylenes (C₁₃E₆), forms microaggregates in poly(ethyleneglycol) 400. These self-assembly systems are strengthen in the presence of a third component which has an affinity for the inner phase.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

A simple flow injection-reduced volume column system for hemoglobin typing

A flow injection (FI)-reduced volume column system was developed for hemoglobin (Hb) typing to be used as an initial screening method for thalassemia. The column was packed with 140 μl diethylaminoethyl (DEAE)-Sephadex A-50 ion exchange beads. Hb can be separated using Tris–HCl buffer solution with pH gradient 8.5–6.5 and then monitored spectrophotometrically at 415 nm. The hemolysate of 40 blood samples from packed red cells were screened for thalassemia by determining the amount of HbA₂ and HbE present. The proposed system was able to predict positive test results from those samples with β, E-trait and EE homozygous thalassemia, Hb types that were independently identified following the conventional method at the hospital laboratory. Advantages of the proposed system over the conventional column technique include low amount of reagents and blood sample needed, short analysis time and low cost. Each analysis required only 80 μl of 50 times diluted packed cells, which is equivalent to 1.6 μl undiluted packed cells, and it can be completed in only 35 min. This simple FI-reduced volume column system was demonstrated to be an economic alternative system for Hb typing to initially screen some types of thalassemia such as β-trait, E-trait and EE-homozygous which are commonly found in Thailand.     

Calculation of the van der Waals volumes of organic molecules

A new and more precise method is proposed for calculating van der Waals atomic and molecular volumes of organic compounds. The method provides for intersections of three or more spheres at one point of space. Such a possibility is essential for calculating the volumes of sterically overcrowded molecules and of molecules with intramolecular hydrogen bonds. A computer program for IBM PC/AT(XT) is developed. Depending on the atomic environment in the molecule, the average values of the volume increments for atoms C, N, O, H, F, Cl, and S are obtained using the data from the Cambridge Structural Database.N. S. Kurnakov Institute of General and Inorganic Chemistry, Russian Academy of Sciences, Moscow 117071. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 4, pp. 922–931, April, 1992.     

Fluorocarbons in the global environment: a review of the important interactions with atmospheric chemistry and physics

Fluorocarbon impact on ozone depletion is reviewed together with the efficacy of the Montreal Protocol in acting to correct the imbalance between stratospheric ozone production and destruction. The Protocol is also helping to reduce global warming: CFCs are shown to be currently the largest fluorocarbon contributors to climate change. Relative contributions to climate change from CFCs and their HFC substitutes are discussed, together with the consequences of control of minor greenhouse gases on an environmental impact which is dominated by carbon dioxide emissions. Both the potencies of the materials for environmental change and their concentrations in the atmosphere are important and are considered here.Trifluoroacetic acid, a minor product of atmospheric decomposition of some HCFCs and HFCs and of the pyrolysis of fluoropolymers, has been shown to be uniformly distributed in seawater to a depth of over 4000 m and so is natural, although the actual source has yet to be identified.The Montreal Protocol is only one example of action to reduce undesirable impact from fluorocarbons. Other, less universal, actions include abatement of fluoroform greenhouse gas emissions from HCFC manufacturing, process changes to eliminate trifluoromethylsulfur pentafluoride emissions from electrochemical fluorination and ceasing manufacture of perfluorooctanyl sulfonate compounds due to their persistence in human tissue.