一种电力架空线垂度的简算方法

以输配电工程中带有绝缘子的电力架空线为研究对象, 简化绝缘子的力学模型, 采用纵横弯 曲理论推导了钢芯铝铰线的挠度方程, 计算了在自重和温度载荷共同作用下的架空线垂度和 水平张力. 计算结果表明, 文中算法简单有效, 架空线跨距和温度等是架空线垂度的主要 影响因素. 架空线垂度对温度的平均变率为2.55mm/$^{\circ}$C; 当跨距减 小1%时, 垂度增加近60%.     

简支梯形底扁球壳弯曲问题的准格林函数方法

以简支梯形底扁球壳的弯曲问题为例,详细阐明了准格林函数方法的思想.即利用问题的基本解和边界方程构造一个准格林函数,这个函数满足了问题的齐次边界条件,采用格林公式将简支扁球壳弯曲问题的控制微分方程化为两个互相耦合的第二类Fredholm积分方程.边界方程有多种选择,在选定一种边界方程的基础上,可以通过建立一个新的边界方程...     

基于刚（粘）塑性流动理论的自然单元法研究

将自然单元法与刚（粘）塑性流动理论相结合,对自然单元法在金属塑性成形过程数值模拟中的应用进行了研究。采用基于Voronoi图和Delaunay三角化结构的Non-Sibsonian插值方法构造近似速度场向量,实现无网格方法中速度边界条件的直接精确施加,提出了基于刚（粘）塑性流动理论的无网格自然单元法。运用不完全广义变分...     

组合荷载作用下腐蚀缺陷管道的极限承载力

腐蚀缺陷的存在会降低管道的承载力,影响管道的正常运行.考虑了管道轴向与环向材料强度的各向异性,提出了腐蚀缺陷压力管道在内压、轴力和弯矩组合荷载作用下极限承载力的一组广义解.推导了等深度腐蚀、椭圆腐蚀和抛物线三种形状腐蚀缺陷管道的解析解.通过算例验证了解析解与广义解结果具有很好的吻合性.腐蚀形状对极限承载力有显著影响,把...     

基于边界元法的非均质薄板弯曲问题的解

本文用边界元法研究非均质无限域弹性薄板弯曲问题.在数值实施过程中,对于夹杂和基体分别形成边界积分方程.通过离散边界积分方程,得到相应的方程组,然后结合界面条件,最终获得问题的求解方程组.在界面的相关量求得之后,可以根据需要来求解基体和夹杂中的有关位置的弯矩.数值结果与已有的解做了对比.     

一种可考虑弯曲效应的多步法及其在矩形管拉弯成形中的应用

多步法可以考虑变形历史,也顺应了多工步成形的需要,在板料成形的数值模拟中有着良好的应用前景。但传统的多步法主要是基于膜单元的,没有能够准确地考虑成形中的弯曲效应,不适合模拟弯曲变形占主导的成形过程,如型材的拉弯成形。为此,本文将无转动自由度的BST壳单元引入,通过单元片内四个相邻单元,方便地计算出相邻构型的曲率,并通过...     

On a differential game in a nondamped distributed system

We study a differential game of approach in a system whose dynamics is described by a Sobolev‐type second‐order operator differential equation in Hilbert spaces. Solutions of the equation are represented by cosine and sine operator functions. To obtain solvability conditions of the game problem, we use support functionals of two sets, which defined by the behaviors of pursuer and evader. The results are applied to the investigation of conflicted‐controlled dynamics of bending waves in a rod.     

In situ measurement of pressure and strain effects in corundum ceramics

Abstract

An Equipement has been built for the generation of uniaxial pressure and of bending stress respectivety directly in the cavity of an X-band ESR spectrometer. Changes of the structure of paramagnetic centres (Fe³⁺ on Al³⁺ sites) could be detected in materials with a high content of corundum under the innuence of pressure and bending stress. The objects of investigation are not only suitable model system but also have practical relevance. The Fe³⁺-ions, incorporated in the materials react very sensitive on mechanically or thermally induced changes of the state of the matrix. They give insight into the materials at a microscopic level The interpretation of the observed intensity and shift effects is possible on the basis of an adequate spin-hamiltonian.     

一种新型多芯-双模-大模场面积光纤的设计和分析

提出了一种新型双空气孔多芯-双模-大模场面积光纤结构, 计算了其模场分布、基模有效面积及弯曲损耗特性, 分析了各结构参量对其有效折射率及有效面积的影响. 这种结构在增大有效面积的同时使得二阶模的TE₀₁, TM₀₁模截止, 实现双模传输, 基模有效面积约为1044 μm².调整其结构参量, 甚至可以达到单模传输.这种结构制作简单、设计灵活, 可用于高速大容量无源光纤及有源器件中.合理设计各结构参量, 可以使有效面积达到3512 μm²甚至更高, 从而满足光通信领域中大容量、高功率传输等实际应用的需求. 关键词： 多芯光纤 双模 大模场面积 弯曲损耗     

Investigation of the Effective Space–Time of the Vacuum Nonlinear Electrodynamics in a Magnetic Dipole Field

The metric tensor of the effective pseudo-Riemannian space–time for an electromagnetic wave propagating in the magnetic dipole field and the gravitational field of a neutron star is obtained within a parameterized post-Maxwellian vacuum electrodynamics. The angles of the nonlinear electrodynamic and gravitational ray bending for electromagnetic waves propagating in the magnetic equatorial plane of the star are calculated based on an analysis of isotropic geodesics of this space. We show that for all nonlinear theories whose post-Maxwellian parameters do not coincide, the velocity of the electromagnetic signal propagation in external fields and the rays along which these signals propagate depend on the polarization of the electromagnetic waves. The difference of the source-to-detector propagation time of these signals for two principal polarization states is calculated.