Raman spectroscopy of CaM2+Ge2O6 (M2+ = Mg,Mn, Fe,Co, Ni,Zn) clinopyroxenes

The Raman spectra of Ge‐clinopyroxenes CaM²⁺Ge₂O₆ (M²⁺ = Mg, Mn, Fe, Co, Ni, Zn), general formula M2M1T₂O₆, are reported for the first time. Their spectral features are discussed in comparison with corresponding Si‐pyroxenes. The vibrational wavenumbers of germanates may be roughly obtained by a scale factor of about ~0.8 by those of the corresponding silicates, due to the Ge‐Si mass difference. The main peaks in the germanate Raman spectra at ~850 and ~540 cm⁻¹ may be related to Ge‐O tetrahedral stretching and chain bending, respectively; minor peaks between 200 and 400 cm⁻¹ are ascribed to bending and stretching of the non‐tetrahedral cations. Within Ge‐pyroxenes, possible correlations between crystallographic parameters and the vibrational wavenumbers are investigated. The main stretching mode at ~850 cm⁻¹ shows wavenumber changes with M²⁺ substitutions, but no simple correlation can be found with M²⁺ cation mass or size. On the other hand, the chain bending wavenumber linearly decreases with increasing ionic radius of the M²⁺ cation: the expansion of the M1 polyhedron reduces the chain kinking angle and the Ge‐Ge distances correspondingly increase. Copyright © 2015 John Wiley & Sons, Ltd.     

Optimized IR synchrotron beamline design

Synchrotron infrared beamlines are powerful tools on which to perform spectroscopy on microscopic length scales but require working with large bending‐magnet source apertures in order to provide intense photon beams to the experiments. Many infrared beamlines use a single toroidal‐shaped mirror to focus the source emission which generates, for large apertures, beams with significant geometrical aberrations resulting from the shape of the source and the beamline optics. In this paper, an optical layout optimized for synchrotron infrared beamlines, that removes almost totally the geometrical aberrations of the source, is presented and analyzed. This layout is already operational on the IR beamline of the Brazilian synchrotron. An infrared beamline design based on a SOLEIL bending‐magnet source is given as an example, which could be useful for future IR beamline improvements at this facility.     

Investigation of flexural properties and failure behaviour of biaxial braided CFRP

In this research, the experimental tests of quasi-static three-point bending and three-point bending fatigue were carried out for a ±25° biaxial braided carbon fibre reinforced polymer (CFRP) manufactured using vacuum assisted resin transfer moulding (VARTM). A finite element (FE) model was also set up for quasi-static testing and the prediction results revealed that local fibre volume fraction (FVF) is a primary source affecting the mechanical properties of braided CFRP. The fatigue of the braided CFRP was defined as three different stages according to the flexural modulus results. The damage modes of the test specimens were observed via a digital microscope and scanning electron microscope (SEM) and the process-induced defects were summarised. With compiled results and observations, this study provides a better understanding of failure and fatigue behaviour of biaxial braided composites and their flexural properties which offers a good basis for any further research in fibre volume fractions, structure design and manufacturing for braided CFRP.     

任意边界条件下双模量矩形薄板的弯曲

将双模量板等效为两个各向同性小矩形板组成的层合板,假定该层合板的中性面即为两个小矩形板的交界面。根据中性面上应力为零且薄板全厚度上应力的代数和为零,推导了双模量矩形薄板的中性面位置。本文采用严宗达提出的带补充项的双重正弦傅里叶级数通解,该通解可以适用于任意边界条件的矩形薄板且不需要叠加或者重新构造。联立边界条件和控制方程,求得通解中的待定系数并代入到通解中,即可得到任意边界条件下双模量矩形薄板的弯曲解析解。与有限元结果比较,本文结果符合工程精度要求。     

D形光纤Bragg光栅弯曲灵敏度的理论和实验研究

用材料力学理论分析了D形光纤Bragg光栅（D-shaped fiber Bragg grating,D-FBG）以及常规光纤Bragg光栅由弯曲引起的轴向应变,得到了光栅Bragg波长漂移的弯曲敏感特性.实验结果和理论计算结果基本相符.与常规FBG相比,该D-FBG的弯曲灵敏度要高近80倍.因此D-FBG可以直接应用于弯曲形变的测量,以及间接应用于压力、加速度等物理量的测量.理论分析和实验结果对采用该类型光纤光栅的器件和传感系统的设计具有参考意义.     

一种轿车车轮应力状态测量与分析方法

基于台架应变测试试验方法,研究轿车车轮在疲劳试验中的应力状态。结果表明:车轮的径向疲劳试验时,轮胎会对车轮的载荷产生较大的影响,轮胎与转鼓的挤压变形以及正反转动都会对车轮的应力状态产生影响;车轮径向疲劳试验时,最大应变出现在轮辋与轮胎接触位置沿车轮圆周方向,而在靠近轮心位置的应变较小;车轮弯曲疲劳试验时,最大应变出现在轮辐靠近轮心的位置,最大应变出现在轮辐的长度方向;不同的载荷对车轮应变的变化规律并没有影响,但是会对最大和最小峰值产生影响。     

交变电场作用下骨表面温升的实验研究

骨具有力电性质,这一性质可促进骨组织生长。骨既是生理器官又是介电材料,在交变电场作用下,其表现行为可能有生理作用。为此,本文测量了骨悬臂梁试样在交变电场下的表面温升与顶端挠度。发现在电压70V,频率为10~70kHz的交流电场下,最大表面温升达到2~4℃,最大挠度变化为9.0~78.7μm;在频率10kHz,电压为70~175V的交流电场下,最大表面温升达到4~6℃,最大挠度变化为13.0~114.3μm。同时测量了两种经典介电材料有机玻璃和聚乙烯在交变电场下的温升与顶端挠度,最大温升低于0.5℃,但是挠度与骨试样相当,所以相对高温升是骨特有的性质。将交流电压有效值替换成相同幅值的直流电压时,最大温升也低于0.5℃,基本没有挠度变化,所以相对的高温升反映了骨的交流性质。分析后认为,骨在交变电场作用下的温升由胶原的介电损耗引起。实验数据显示,骨在交变电场下,表面温度变化与加载电压的平方成正比,且在实验加载的10~70kHz频段内,骨的介电常数随频率的变化明显。     

砂岩方梁断裂过程区范围的实验确定方法

裂纹前端的断裂过程区是引起岩石非线性断裂及尺寸效应的主要原因。利用数字图像相关技术对砂岩开展了三点弯曲梁实验,获得观测区域高精度的全场位移和应变数据,根据断裂韧带区域水平位移和水平应变的分布特征,结合裂尖岩石颗粒变化的微观分析,提出采用裂纹尖端水平位移波动性和水平应变突变性所得到的波动系数和水平应变突变值,确定断裂过程区形状和临界尺寸的方法。结果表明:砂岩断裂过程区的形状为不规则的狭长带状区域,断裂过程区的临界长度为11~13mm,临界宽度为1.58~2.36mm。断裂过程区区域内形变在趋向裂尖时呈指数增加,但其单位区域内的形变增量呈波动状态。该方法能够更加准确判断岩石断裂过程区的范围,有助于分析岩石的非线性断裂特性。     

MECHANICAL ANALYSIS OF TOROFLUX

流动环是一款魔术玩具,具有丰富的力学行为。制作流动环时应用了预应力储存技术,使得环内部储存了弹性弯曲变形能。一经外界扰动,流动环会迅速张开,进入一种新的稳定平衡状态;若给张开的流体环输入某种形式的能量,环会合拢,恢复原有的稳定平衡状态。本文从能量的角度对流动环张开与合拢等现象进行力学分析。     

不同加载速率下砂岩弯曲破坏的细观机理

岩石细观破裂形貌是岩石破坏机制的重要反映,为研究不同加载速率对砂岩弯曲破坏的影响,通过三点弯曲实验和扫描电镜方法,对某煤矿关键层砂岩弯曲破断裂纹细观形态以及裂纹的自相似性进行了研究。选取6个不同加载速率对岩样进行三点弯曲实验,观察其宏观断裂情况,并利用扫描电镜对弯曲断裂面表面裂纹细观结构进行观察,并拍摄不同倍数下的扫描电镜图片。对图片进行图像处理后得到砂岩弯曲断裂破坏细观裂纹信息,并计算得到微裂纹的分形盒维数值。结果显示:随着加载速率的提高,砂岩穿晶断裂的比例也随之升高,裂纹分形维数亦随着加载速率的增大而增加,同时,分形维数还与弯曲断裂破坏荷载和抗弯强度成正比。可见,加载速率对断裂方式有一定的影响,且加载速率越大断裂所需的破坏能越大,裂纹分布越广,表明开采速度与岩爆等岩体动力灾变有密切关系。