Acrylic acid level and adhesive performance and peel master‐curves of acrylic pressure‐sensitive adhesives

Three series of pressure‐sensitive adhesives were prepared with constant glass‐transition temperature, using emulsion polymerization. The monomers chosen were butyl acrylate, 2‐ethylhexyl acrylate (EHA), methyl methacrylate (MMA), and acrylic acid (AA). Within each polymer series, the proportion of AA monomer was held constant for each polymer preparation but acrylic ester monomer levels were varied. Adhesion performance was assessed by measurement of loop tack, static shear resistance, and through the construction of peel master‐curves. Peel master‐curves were generated through peel tests conducted over a range of temperatures and peel rates and through application of the time–temperature superposition principle. Bulk effects dominated by polymer zero shear viscosity change as AA and EHA levels were varied were attributed to the observed effect on static shear resistance and the horizontal displacements of peel master‐curves. Static shear resistance was found to strongly correlate with log(a_C), a parameter introduced to horizontally shift peel master‐curves to form a superposed, “super master‐curve”. An interfacial interaction was proposed to account for deviations observed when loop tack was correlated with log(a_C). Surface rearrangements via hydrogen bonding with the test substrate were suggested as responsible for the interfacial interaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1237–1252, 2006     

PHASE INVERSION AND ITS MECHANICAL MODEL STUDIES FOR THE TWO-PHASE POLYMER BLEND SYSTEMS (Ⅱ)——DYNAMIC VISCOELASTIC RESPONSE

The dynamic viscoelastic response of the two-phase polymer blend systems shows the characteristics of the thermorheologically complex materials. In this paper theoretical equations for describing the dynamic viscoelastic response of such polymer blend systems have been established by means of the mechanical modeling technique. The dynamic viscoelastic response of the blend systems at any blend composition can be predicted theoretically by using the equations established, provided that the dynamic viscoelastic response of the two pure components and the mechanical model parameters are known in advance. Thus, we provide an effective method for studying the dynamic mechanical properties and the molecular relaxation characteristics of the two-phase polymer blend systems.     

Mineral–water interfacial structures revealed by synchrotron X-ray scattering

Chemical reactions occurring at the mineral–water interface are controlled by an interfacial layer, nanometers thick, whose properties may deviate from those of the respective bulk mineral and water phases. The molecular-scale structure of this interfacial layer, however, is poorly constrained, and correlations between macroscopic phenomena and molecular-scale processes remain speculative. The application of high-resolution X-ray scattering techniques has begun to provide substantial new insights into the molecular-scale structure of the mineral–water interface. In this review, we describe the characteristics of synchrotron-based X-ray scattering techniques that make them uniquely powerful probes of mineral–water interfacial structures and discuss the new insights that have been derived from their application. In particular, we focus on efforts to understand the structure and distribution of interfacial water as well as their dependence on substrate properties for major mineral classes including oxides, carbonates, sulfates, phosphates, silicates, halides and chromates. We compare these X-ray scattering results with those from other structural and spectroscopic techniques and integrate these to provide a conceptual framework upon which to base an understanding of the systematic variation of mineral–water interfacial structures.     

Growth of ramification-like ZnO rods in the presence of polyaniline

To obtain new materials with synergetic or complementary behaviors, polyaniline composite filled with ZnO rods in ramification-like structure was prepared by a hydrothermal approach. Comparative experiments of ZnO preparation in the presence of some metal ions were also carried out. The results indicated that the morphology of ZnO was strongly affected by the preparation condition. The method to grow ZnO rods in the presence of polyaniline offers a simple approach to obtain polyaniline composite filled with linear ZnO structure. The results of X-ray photoelectron spectroscopy show that the strong interaction between ZnO and polyaniline possibly exists to cause the charge transfer.     

Rheological properties of multisticker associative polyelectrolytes in semidilute aqueous solutions

Multisticker associative polyelectrolytes of acrylamide (≈86 mol %) and sodium 2‐acrylamido‐2‐methylpropanesulfonate (≈12 mol %), hydrophobically modified with N,N‐dihexylacrylamide groups (≈2 mol %), were prepared with a micellar radical polymerization technique. This process led to multiblock polymers in which the length of the hydrophobic blocks could be controlled through variations in the surfactant‐to‐hydrophobe molar ratio, that is, the number of hydrophobes per micelle (N_H). The rheological behavior of aqueous solutions of polymers with the same molecular weight and the same composition but with two different hydrophobic block lengths (N_H = 7 or 3 monomer units per block) was investigated as a function of the polymer concentration with steady‐flow, creep, and oscillatory experiments. The critical concentration at the onset of the viscosity enhancement decreased as the length of the hydrophobic segments in the polymers increased. Also, an increase in the N_H value significantly enhanced the thickening ability of the polymers and affected the structure of the transient network. In the semidilute unentangled regime, the behavior of the polymer with long hydrophobic segments (N_H = 7) was studied in detail. The results were well explained by the sticky Rouse theory of associative polymer dynamics. Finally, the viscosity decreased with an increase in the temperature, mainly because of a lowering of the sample relaxation time. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1640–1655, 2004     

On the Rigidity of Polynorbornenes with Dipolar Pendant Groups

A range of polynorbornenes (PNBs) with fused dipolar pendant groups at C‐5,6 positions was synthesized by ring‐opening metathesis polymerization catalyzed by a ruthenium carbene complex (Grubbs I). Photophysical studies, EFISH measurements, and atomic force microscopy images have been used to investigate the structures and morphology of these polymers. These results suggest that the polymers may adopt rigid rod‐like structures. The presence of the double bonds in PNBs appeared to be indispensable for the rigidity of the polymers. Interaction between unsaturated pendant groups may result in coherent alignment leading to a rod‐like structure.     

Deformation behavior of thin,compliant layers under tensile loading conditions

In this article, a connection is made between the behavior of thin layers of Newtonian liquids under tensile loading conditions and the behavior of highly deformable elastic or viscoelastic solids, which are more commonly used as adhesives. The behavior of Newtonian liquids is understood in the most quantitative detail and serves as a starting point for understanding the origins of fingering and cavitation instabilities that appear when the tensile deformation rates applied to these layers are sufficiently large. Similar instabilities appear in solid systems and can be attributed to common features of the stress distribution for incompressible liquids and solids. A unifying treatment is presented that can be used to understand the overall deformation behavior and adhesive performance of a wide variety of solid and liquid systems that are typically applied as thin layers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4023–4043, 2004     

Molecular composites in thermosets

The synthesis of molecular composites where rigid polymer molecules are reinforcing elements in a thermoset bisimide matrix has been investigated. The approach has been designed to avoid phase separation by selecting systems where reaction of amine-terminated rigid and semiflexible oligomers with maleimide unsaturation occurs prior to crosslinking of the thermoset. This objective has been met for some compositions. The concentration and molecular weight of the rigid oligomers have been varied. The structure of the reinforcing polymer, the reactivity of the maleimide and the conditions for composite synthesis are variables of critical importance, and further work must determine the promise and limitations of this approach.     

单向应力条件下松弛时间率相关的非线性粘弹性本构模型

基于单向拉伸实验研究和内变量理论 ,提出了一种新的简单的一维非线性粘弹性本构关系 .对两种粘弹性材料 ,即高密度聚乙烯和聚丙烯进行了不同加载速率作用下的拉伸实验研究 ,实验结果表明 ,两种材料的应力应变关系与加载速率相关 ;对材料的应力应变实验数据进行拟合发现 ,材料的松弛时间具有很强的应变率相关性 ,当应变率发生数量级变化时 ,材料的松弛时间也发生数量级的变化 .采用内变量理论 ,导出了在单轴应力条件下松弛时间率相关的非线性粘弹性本构关系的迭代形式 ,并给出其收敛条件 .当采取一次迭代形式时 ,本构关系退化为松弛时间率相关的Maxwell模型 .数值拟合的结果表明 ,一次迭代形式的本构关系就可以很好地拟合和预测实验结果 .     

Polymerization-induced phase separation in polyether-sulfone modified epoxy resin systems: effect of curing reaction mechanism

Polyethersulfone (PES)-modified epoxy systems with stepwise reaction were studied throughout the entire curing process by using optical microscopes, time-resolved light scattering (TRLS), and a rheolometry instrument compared with that of chainwise polymerization. The results suggested that the phase separation process is mainly controlled by the diffusion of epoxy oligomers for stepwise mechanism system and by that of epoxy monomers for chainwise mechanism system. In case of high PES content (SPES-20%) light-scattering results showed a viscoelastic phase separation and the characteristic relaxation time of phase separation can be described well by the WLF equation. However, in the case of low PES content (SPES-14%) secondary phase separation phenomenon was observed by Optical Microscope and further demonstrated by rheological study.