LIGHTWAVE PROPAGATION IN SUBWAVELENGTH HOLES

In this paper we evaluate methods for calculating dispersion relations for waves with wavelengths of the order of hundreds of nanometres propagating in square waveguides with imperfectly conducting walls. The methods considered here are based on those used previously for rectangular dielectric waveguides.     

Curran猜想的解答

本文确定了能作为有限群自同构群的Ｐ－群的最佳下最，彻底解决了Ｃｕｒｒａｎ在１９８９年提出的关于此最佳下界的三个猜想。     

PHASE INVERSION AND ITS MECHANICAL MODEL STUDIES FOR THE TWO-PHASE POLYMER BLEND SYSTEMS (Ⅱ)——DYNAMIC VISCOELASTIC RESPONSE

The dynamic viscoelastic response of the two-phase polymer blend systems shows the characteristics of the thermorheologically complex materials. In this paper theoretical equations for describing the dynamic viscoelastic response of such polymer blend systems have been established by means of the mechanical modeling technique. The dynamic viscoelastic response of the blend systems at any blend composition can be predicted theoretically by using the equations established, provided that the dynamic viscoelastic response of the two pure components and the mechanical model parameters are known in advance. Thus, we provide an effective method for studying the dynamic mechanical properties and the molecular relaxation characteristics of the two-phase polymer blend systems.     

Diffusion in organic solvents: Interdiffusion coefficient of 1,1,2,2-tetrabromoethane

Interdiffusion coefficient have been measured for 1,1,2,2-tetrabromoethane in 21 organic solvents in order to ascertain the influence of shape, size, viscosity, nature and degree of branching, of the solvent molecules on transport properties. None of the existing correlations for diffusion in binary liquid systems appear to fit all the experimental data. Steric effects due to the solvent molecules are shown to be very important in the interpretation of the diffusion process.     

Networks and chain coverings in partial orders and their products

For an arbitrary poset P, subposets {P _i : 1ik} form a transitive basis of P if P is the transitive closure of their union. Let u be the minimum size of a covering of P by chains within posets of the basis, s the maximum size of a family of elements with no pair comparable in any basis poset, and a the maximum size of an antichain in P. Define a dense covering to be a collection D of chains within basis posets such that each element belongs to a chain in D within each basis poset and is the top of at least k-1 chains and the bottom of at least k-1 chains in D. Dense coverings generalize ordinary chain coverings of poset. Let d=min {|D|–(k–1)|P|}. For an arbitrary poset and transitive basis, a convenient network model for dense coverings yields the following: Theorem 1: da, with equality iff P has a minimum chain decomposition in which every pair of consecutive elements on each chain are comparable in some basis poset. Theorem 2: usda. Theorem 3: s=d iff s=a. The most interesting special case is where the transitive basis expresses P as the product of two posets, in which case u and s measure the minimum and maximum sizes of unichain coverings and semiantichains.     

Thec logc contribution to the electrolyte conductance and Onsager's reciprocal relation

The differential equations and the boundary conditions for the nonequilibrium binary distribution function of an unsymmetrical binary electrolyte are derived from the Ebeling-Falkenhagen continuity equation. The connection between the Onsager reciprocal relation and the binary distribution functions is shown. Further, Feistel's result for thec logc contribution to the conductance is extended to unsymmetrical binary electrolytes. The reason for the difference between Feistel's and Chen'sc logc term is explained, and the significance of Onsager's reciprocal relation for the calculation ofc logc and higher-concentration contributions of the conductance is discussed.     

Rheological properties of multisticker associative polyelectrolytes in semidilute aqueous solutions

Multisticker associative polyelectrolytes of acrylamide (≈86 mol %) and sodium 2‐acrylamido‐2‐methylpropanesulfonate (≈12 mol %), hydrophobically modified with N,N‐dihexylacrylamide groups (≈2 mol %), were prepared with a micellar radical polymerization technique. This process led to multiblock polymers in which the length of the hydrophobic blocks could be controlled through variations in the surfactant‐to‐hydrophobe molar ratio, that is, the number of hydrophobes per micelle (N_H). The rheological behavior of aqueous solutions of polymers with the same molecular weight and the same composition but with two different hydrophobic block lengths (N_H = 7 or 3 monomer units per block) was investigated as a function of the polymer concentration with steady‐flow, creep, and oscillatory experiments. The critical concentration at the onset of the viscosity enhancement decreased as the length of the hydrophobic segments in the polymers increased. Also, an increase in the N_H value significantly enhanced the thickening ability of the polymers and affected the structure of the transient network. In the semidilute unentangled regime, the behavior of the polymer with long hydrophobic segments (N_H = 7) was studied in detail. The results were well explained by the sticky Rouse theory of associative polymer dynamics. Finally, the viscosity decreased with an increase in the temperature, mainly because of a lowering of the sample relaxation time. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1640–1655, 2004     

甲基丙烯酸—磷脂酰乙醇甲基丙烯酰胺共聚物LB膜的研究

制备了不同摩尔比的甲基丙烯酸-磷脂酰乙醇甲基丙烯酰胺共聚物,研究了这种共聚物在水面的表面压力(π)-分子面积(A)曲线、共聚物制成的MOS LB膜的电容(C)-电压(V)特性及此LB膜的相变温度。     

Massively time-parallel,approximate simulation of loss queueing systems

A time-parallel simulation obtains parallelism by partitioning the time domain of the simulation. An approximate time-parallel simulation algorithm named GG1K is developed for acyclic networks of loss FCFSG/G/1/K queues. The GG1K algorithm requires two phases. In the first phase, a similar system (i.e. aG/G/1/ queue) is simulated using the GLM algorithm. Then the resultant trajectory is transformed into an approximateG/G/1/K trajectory in the second phase. The closeness of the approximation is investigated theoretically and experimentally. Our results show that the approximation is highly accurate except whenK is very small (e.g. 5) in certain models. The algorithm exploits unbounded parallelism and can achieve near-linear speedup when the number of arrivals simulated is sufficiently large.     

Network theory of the nonlinear behaviour of polymer melts. Simple shear flow

Summary The network model developed in a previous paper is applied to the simple shear flow of polymer melts. The constitutive equation obtained consists of two terms. One of them describes the stress due to the network strands which exist at the onset of the deformation, dissociate during the deformation and result in a single integral constitutive equation with a strain dependent damping function. The formulation of the damping function in invariant form seems to be almost impossible.The second normal stress differenceN ₂ of the model is not zero,but has negative values. According to our model this is a consequence of the deformation dependence of the disentanglement process. The theory is compared with experimental data for a LDPE melt. It is found that the model explains the main features of the shear flow behaviour of the LDPE melt investigated preciously.

---

Zusammenfassung Das Netzwerk-Modell, das in einer vorangegangenen Arbeit entwickelt wurde, wird für die einfache Scherströmung von Polymerschelzen angewendet. Die abgeleitete rheologische Zustandsgleichung besteht aus zwei Gliedern. Das erste beschreibt die Spannung-Dehnung-Beziehung der Kettensegmente, die zu Beginn der Deformation existieren und während der Deformation aufgelöst werden. Es hat die Form der einfachen Integralbeziehung mit einer Gedächtnisfunktion. Es ist kaum möglich, die dabei erhaltene Gedächtnisfunktion als Funktion der Invarianten der der Tensoren darzustellen. Die zweite Normal-SpannungsdifferenzN ₂ des Modells ist nicht Null und hat einen negativen Wert. Dies ist nach unserem Modell eine Folge der Deformationsabhängigkeit des Entschlaufungsprozesses. Die Theorie wird mit dem experimentellen Daten für eine LDPE-Schmelze verglichen, wobei sich zeigt, daß das Modell die wesentlichen Merkmale des Scherverhaltens der LDPE-Schmelze gut erklärt.