To what extent can an uncertainty calculation be general?

 It is argued that results of uncertainty calculations in chemical analysis should be taken into consideration with some caution owing to their limited generality. The issue of the uncertainty in uncertainty estimation is discussed in two aspects. The first is due to the differences between procedure-oriented and result-oriented uncertainty assessments, and the second is due to the differences between the theoretical calculation of uncertainty and its quantication using the validation (experimental) data. It is shown that the uncertainty calculation for instrumental analytical methods using a regression calibration curve is result-oriented and meaningful only until the next calibration. A scheme for evaluation of the uncertainty in uncertainty calculation by statistical analysis of experimental data is given and illustrated with examples from the author's practice. Some recommendations for the design of corresponding experiments are formulated.     

Vanadium Doped Sol-Gel TiO2 Coatings

A study of the experimental conditions required to obtain vanadium doped sol-gel TiO2 coatings is presented. Tetraethyl orthotitanate was employed as the TiO2 source and VCl3, VOSO4 · H2O and VOSO4 dissolved H2SO4 where employed as vanadium sources.Dip coating has been used to produce coatings on silicon wafers, spectral carbon electrodes and titanium electrodes. Both supported and unsupported films have been studied by UV-Vis spectra, IR spectroscopy and X-ray diffraction (XRD). The measurements have been made on samples as prepared and treated thermally at temperatures between 100°C and 300°C. The thermal treatment temperatures have been established from DTA/TGA measurements.The vanadium doped sol-gel TiO2 coatings have been tested as sensors for redox potential measurements in electrochemical processes. The influence of both the thickness of films and the nature of substrate has been investigated.     

Chemically Sensitive Field‐Effect Transistors and Chemiresistors: New Materials and Device Structures

Electronic sensor technology remains of widespread and intense interest. There are compelling needs to detect chemical species ranging from small molecules dispersed in the gas phase to complex biopolymers in aqueous solution. This review describes some recent advances in three main areas: chemically sensitive resistors (chemiresistors, CRs) including inorganic and organic based devices, field effect transistors (FETs) with semiconducting layers and/or gates with chemical sensitivity, and sensors based on the differential conductivity of nanotubes and nanowires. Results reported in the last two to three years are emphasized, highlighting some current trends in the development of sensors for applications such as diagnostics, process monitoring, and security.     

用热聚法固定指示剂的光纤氧气传感器研究

采用热聚法将甲叉双丙烯酰胺（MBBA）聚合并共价交联在硅烷化的玻璃微珠上 ，同时将指示剂Ru（Ⅱ）-邻啡咯啉配合物物理包埋于聚合物中，研制了一种基于 荧光猝灭原理的光纤氧气传感器，采用NaHSO_3-O_2-MnSO_4体系引发MBBA水溶液热 聚合后应，通过确定NaHSO_3,MnSO_4,MBBA和Ru(phen)_3Cl_2的最佳反应浓度以及 玻璃微珠的尺寸，优化了聚合反应条件，改善了指示剂的固定效果，制备了性能较 好的传感器探头，该传感器的检测下限为5×10~(-6)(V/V)，响应时间为10s该传感 器连续工作50min,重复性标准偏差为±1%。     

聚酰胺修饰碳糊电极测定槲皮素的研究

用聚酰胺修饰碳糊电极在ｐＨ３６０的Ｂｒｉｔｏｎ－Ｒｏｂｉｎｓｏｎ缓冲溶液中，将槲皮素开路富集一定时间后，从０４５Ｖ（ｖｓ．Ａｇ／ＡｇＣｌ）向阴极化扫描至－０５５Ｖ获得Ｉ－Ｅ曲线。槲皮素的峰电位为０１８Ｖ。峰电流与槲皮素浓度在１０～４００μｍｏｌ／Ｌ范围内呈良好的线性关系。所拟定方法用于芦丁水解产物测定，结果满意。     

三组分(NiO、La2O3、SiO2)负载型加氢催化剂中La2O3的作用

用X射线衍射分析、FT-IR、小角X光散射等方法研究了浸渍法制备的NiO/SiO_2和NiO/(La_2O_3+SiO_2)样品中组分之间的相互作用。La_2O_3在SiO_2上可形成近乎密置单层的分散。在负载了La_2O_3的SiO_2上,NiO的分散程度比在SiO_2上有明显提高,也更容易被还原,而且还原后所得金属镍粒子的平均粒度降低,小粒子所占百分比提高。这些结果表明,NiO/(La_2O_3+SiO_2)比NiO/SiO_2样品具有更高的加氢还原硝基普鲁卡因为胺基普鲁卡因的活性,与Ni/(La_2O_3+SiO_2)比Ni/SiO_2活性高的情形相一致。     

Synthesis and electrochemical properties of spinel LiMn2O4 prepared by the rheological phase method

Pure-phase and well-crystallized spinel LiMn₂O₄ powders were successfully synthesized by a simple rheological phase method. The thermal behavior and structure properties of the powders prepared by the rheological phase method compared with the solid-state reaction were investigated by thermogravimetry, powder X-ray diffraction , scanning electron microscopy and transmission electron microscopy. According to the results of the electrochemical tests, it is obvious that the sample resulting from the rheological phase method shows higher discharge capacity and better cycling stability than one formed in the solid-state reaction. The cyclic voltammogram and columbic efficiency curves also confirm that the product by the rheological phase method has a good cycling performance due to its fine cubic spinel structure and morphology.     

A statistical method to detect chromosomal regions with DNA copy number alterations using SNP-array-based CGH data

Single nucleotide polymorphism (SNP) arrays were used to detect chromosomal regions with DNA copy number alterations. Current statistical methods for microarray-based comparative genomic hybridization (array-CGH) analysis generally assume certain relationships among adjacent markers on the same chromosome, and these assumptions may be questionable. For an SNP-array-based CGH study, multiple normal reference SNP arrays were collected. In order to utilize these normal reference SNP arrays, we derived an empirical distribution of signal ratios for each SNP marker. With an assumed threshold value for the overall error rate control and the defined signal ratio ranges for chromosomal amplification and deletion, we proposed a procedure to identify chromosomal alteration regions based on several bootstrapped one-sample t-tests and the false discovery rate control. When we have multiple arrays for different individuals with the same disease, our method can also be used to detect SNP markers for chromosomal alteration regions that are common among these individuals. We applied our method to a published SNP array data set for breast carcinoma cell lines. For an individual with breast cancer, numerous chromosomal alteration regions were identified. Compared to results of previous studies, our method identified more chromosomal alteration regions, with some being implicated in the literature to harbor genes associated with breast cancer. For multiple cancer arrays, our results suggested the existence of common chromosomal alteration regions. However, a high proportion of false positives also indicated that genetic variations among different individuals with breast cancer can be present.     

Lanthanide induced shifts of aromatic 1,2,3-trimethoxy compounds: Conformational analysis of tetrahydrofurofuran-lignans in solution

Summary The solution conformations of 1,4-diaryl-tetrahydro-1H,3H-furo[3,4-c]furans were determined by means of the LIS technique using a modified LIS-simulation program specially designed for the requirements of the aromatic 1,2,3-trimethoxy arrangement as a bidentate coordination site for the NMR shift reagent. The resulting geometries were confirmed by force field calculations (MM2-87) and compared with X-ray derived structures. Reliable data for the conformations in solution allowed a quantitative estimation of the circular dichroism based on the coupled oscillator model.

---

Lanthanideninduzierte Verschiebungen von aromatischen 1,2,3-Trimethoxy-Verbindungen: Konformationsanalyse von Tetrahydrofurofuran-Lignanen in Lösung

Zusammenfassung Es wurden mittels der LIS-Technik die Konformationen von 1,4-Diaryl-tetrahydro-1H,3H-furo[3,4-c]furanen in Lösung bestimmt. Dazu mußte ein modifiziertes LIS-Simulationsprogramm entworfen werden, das auf die besonderen Verhältnisse der aromatischen 1,2,3-Trimethoxy-Gruppierung eingeht, welche in den untersuchten Verbindungen als zweizähnige Koordinationsstelle für das NMR-Verschiebungsreagens fungiert. Die resultierenden Geometrien wurden mittels Kraftfeldrechnungen (MM2-87) überprüft und soweit vorhanden auch mit Röntgenstrukturdaten verglichen. Für die Lösungskonformationen wurde eine quantitative Abschätzung des Circulardichroismus auf der Basis des Modells für gekoppelte Oszillatoren durchgeführt.

     

碳酸盐前驱物制备Y2O3超细粉及透明陶瓷

以Y(NO3)3和NH4HCO3为原料,通过向Y(NO3)3溶液中滴加NH4HCO3的方式制备了化学组成为Y2(CO3)3·2H2O的先驱沉淀物。研究了先驱沉淀物煅烧过程中的物相变化。先驱沉淀物1100℃煅烧4h后得到了平均粒径为60nm的无团聚Y2O3超细粉体。所得粉体不添加任何添加剂,在1700℃下真空烧结4h得到了透明Y2O3陶瓷。