B值随机变量阵列加权和的完全收敛性

设{X_ni:1≤i≤n,n≥1}为行间独立的B值r.v.阵列,g(z)是指数为1/p的正则变化函数,r>0,{ani 1≤t≤n,n≥1}为实数阵列,本文得到了使(?)成立的条件,推广并改进了Stout及Sung等的著名结论.     

Viscoelastic properties of nanostructured natural rubber/polystyrene interpenetrating polymer networks

The effects of the blend ratio and initiating system on the viscoelastic properties of nanostructured natural rubber/polystyrene‐based interpenetrating polymer networks (IPNs) were investigated in the temperature range of ?80 to 150 °C. The studies were carried out at different frequencies (100, 50, 10, 1, and 0.1 Hz), and their effects on the damping and storage and loss moduli were analyzed. In all cases, tan δ and the storage and loss moduli showed two distinct transitions corresponding to natural rubber and polystyrene phases, which indicated that the system was not miscible on the molecular level. However, a slight inward shift was observed in the IPNs, with respect to the glass‐transition temperatures (T_g's) of the virgin polymers, showing a certain degree of miscibility or intermixing between the two phases. When the frequency increased from 0.1 to 100 Hz, the T_g values showed a positive shift in all cases. In a comparison of the three initiating systems (dicumyl peroxide, benzoyl peroxide, and azobisisobutyronitrile), the dicumyl peroxide system showed the highest modulus. The morphology of the IPNs was analyzed with transmission electron microscopy. The micrographs indicated that the system was nanostructured. An attempt was made to relate the viscoelastic behavior to the morphology of the IPNs. Various models, such as the series, parallel, Halpin–Tsai, Kerner, Coran, Takayanagi, and Davies models, were used to model the viscoelastic data. The area under the linear loss modulus curve was larger than that obtained by group contribution analysis; this showed that the damping was influenced by the phase morphology, dual‐phase continuity, and crosslinking of the phases. Finally, the homogeneity of the system was further evaluated with Cole–Cole analysis. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1680–1696, 2003     

On the departure process of a leaky bucket system with long-range dependent input traffic

Due to the strong experimental evidence that the traffic to be offered to future broadband networks will display long-range dependence, it is important to study the possible implications that such traffic may have for the design and performance of these networks. In particular, an important question is whether the offered traffic preserves its long-range dependent nature after passing through a policing mechanism at the interface of the network. One of the proposed solutions for flow control in the context of the emerging ATM standard is the so-called leaky bucket scheme. In this paper we consider a leaky bucket system with long-range dependent input traffic. We adopt the following popular model for long-range dependent traffic: Time is discrete. At each unit time a random number of sessions is initiated, having the distribution of a Poisson random variable with mean λ. Each of these sessions has a random duration τ, where the integer random variable τ has finite mean, infinite variance, and a regularly varying tail, i.e., P(τ >К) ~ К^-Lα L(К), where 1 < α < 2 L(·) is a slowly varying function. Once a session is initiated, it generates one cell at each unit of time until its termination. We examine the departure process of the leaky bucket policing mechanism driven by such an arrival process, and show that it too is long-range dependent for any token buffer size and any - finite or infinite - cell buffer size. Moreover, upper and lower bounds for the covariance sequence of the output process are established. The above results demonstrate that long-range dependence cannot be removed by the kinds of flow control schemes that are currently being envisioned for broadband networks. This revised version was published online in June 2006 with corrections to the Cover Date.     

Path properties of l_p-valued Gaussian random fields

General limit theorems are established for l~p-valued Gaussian random fields indexed by a multidimensional parameter,which contain both almost sure moduli of continuity and limits of large increments for the l~p-valued Gaussian random fields under(?)explicit conditions.     

有关力学谱和内耗工作的综合与回顾

本文广泛地收集了有关内耗，力学谱，超声衰减方面的专著及会议文集。反映了20世纪在此领域的英文，俄文出版的书籍。也列出了历次国际会议及前苏联，乌克兰，中国的国内会议。文中包括了点缺陷，电，声子，位错，晶界，电畴等诸方面在内的内耗与力学谱工作。     

变加速动力学与舒适性问题

用变加速动力学的急动度(加加速度)概念,分析了车辆、电梯的乘座舒适性与高层钢结构建筑的风振舒适性问题.     

A CLASS OF r-POINT (r+1)ST-ORDER A-STABLE ONE-BLOCK METHODS WITH DAMPING AT THE INFINITE POINT

1　ＩｎｔｒｏｄｕｃｔｉｏｎＦｏｒｓｏｌｖｉｎｇｓｔｉｆｆｉｎｉｔｉａｌｖａｌｕｅｐｒｏｂｌｅｍｓｆｏｒｓｙｓｔｅｍｓｏｆＯＤＥｓｙ′=ｆ(ｙ) ,ｙ(ｔ0 ) =ｙ0 ,ｔ0 <ｔ≤Ｔ ,ｙ0 ,ｙ∈Ｒｍ,ｆ :Ω Ｒｍ →Ｒｍ (1 .1 )ｍａｎｙｐａｒｔｉｃｕｌａｒｏｎｅ ｂｌｏｃｋｍｅｔｈｏｄｓｏｆｔｈｅｆｏｒｍＹｎ+1= ＡＹｎ+ｈ( Ｂ0 Ｆ(Ｙｎ) + Ｂ1Ｆ(Ｙｎ+1) ) , Ａ =Ａ Ｉｍ, Ｂｉ=Ｂｉ Ｉｍ,Ａ ,Ｂｉ∈Ｒｒ×ｒ,Ｙｎ =(ＹＴｎｒ,… ,ｙＴ(ｎ+1)ｒ- 1) Ｔ,Ｆ(Ｙｎ) =(ｆＴ(ｙｎｒ) ,… ,ｆＴ(ｙ(ｎ+1)ｒ- 1) ) Ｔ,ｙｊ≈ ｙ(ｔｊ) ,…     

Material-Adapted Design of Textile-Reinforced Composite Structures with Optimized Vibro-Acoustic and Damping Properties Including Shear Effects

Advanced analytical models have been developed at the ILK, which offer a possibility of calculating the vibro-acoustic and damping behavior of textile-reinforced composite shells and plates with account of shear effects. The simulation models elaborated have been verified on selected examples, and the analytical results were fully corroborated by accompanying numerical calculations for typical lay-ups.__________Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 41, No. 3, pp. 289–302, May–June, 2005.     

Effect of Pressure on Fluid Damping in MEMS Torsional Resonators with Flow Ranging from Continuum to Molecular Regime

High quality factor of dynamic structures at micro and nano scale is exploited in various applications of micro electro-mechanical systems (MEMS) and nano electro-mechanical system. The quality factor of such devices can be very high in vacuum. However, when vacuum is not desirable or not possible, the tiny structures must vibrate in air or some other gas at pressure levels that may vary from atmospheric to low vacuum. The interaction of the surrounding fluid with the vibrating structure leads to dissipation, thus bringing down the quality factor. Depending on the ambient fluid pressure or the gap between the vibrating and the fixed structure, the fluid motion can range from continuum flow to molecular flow giving a wide range of dissipation. The relevant fluid flow characteristics are determined by the Knudsen number which is the ratio of the mean free path of the gas molecule to the characteristic flow length of the device. This number is very small for continuum flow and reasonably big for molecular flow. In this paper, we study the effect of fluid pressure on the quality factor by carrying out experiments on a MEMS device that consists of a double gimbaled torsional resonator. Such devices are commonly used in optical cross-connects and switches. We only vary fluid pressure to make the Knudsen number go through the entire range of continuum flow, slip flow, transition flow, and molecular flow. We experimentally determine the quality factor of the torsional resonator at different air pressures ranging from 760 Torr to 0.001 Torr. The variation of this pressure over six orders of magnitude ensures required rarefaction to range over all flow conditions. Finally, we get the variation of quality factor with pressure. The result indicates that the quality factor, Q, follows a power law, Q ∝P ^–r , with different values of the exponent r in different flow regimes. In the second part of the paper, we propose the use of effective viscosity for considering velocity slip conditions in solving Navier–Stokes equation numerically. This concept is validated with analytical results for a simple case and then compared with the experimental results presented in this paper. The study shows that the effective viscosity concept can be used effectively even for the molecular regime if the air-gap to length ratio is sufficiently small (h ₀/L<0.01). As this ratio increases, the range of validity decreases.     

Interpolatory integration rules and orthogonal polynomials with varying weights

We investigate which types of asymptotic distributions can be generated by the knots of convergent sequences of interpolatory integration rules. It will turn out that the class of all possible distributions can be described exactly, and it will be shown that the zeros of polynomials that are orthogonal with respect to varying weight functions are good candidates for knots of integration rules with a prescribed asymptotic distribution.Research supported by the Deutsche Forschungsgemeinschaft (AZ: Sta 299/4-2).