中高温工质在蒸发器中的换热模拟分析

本文采用分布参数的方法,建立了水源热泵中普遍采用的壳管式蒸发器稳态数学模型.通过中高温水源热泵试验台的实验数据同模拟计算结果的对比,验证了数学模型的准确性。应用此数学模型对中高温工质HTR01、HTR02及R134a在蒸发器典型制热运行工况,进行了模拟计算。得出了三种工质制冷剂侧换热系数沿管长的变化关系并对三种工质的换热性能进行了对比分析,为采用中高温工质的水源热泵换热器设计提供了参考依据.     

激光介质的多次吸收不均匀内热源模型

针对激光介质的内热源,以多次吸收作用为基础提出了适用于侧面双向泵浦板状激光介质的不均匀内热源模型,即多次吸收不均匀内热源模型,并与均匀内热源和一次吸收内热源模型进行了对比分析。研究表明,介质厚度及光吸收系数组成的无量纲参数不同时,三种内热源模型得到的内热源分布也有所不同。最后给出了内热源不均匀度及多次吸收模型与一次吸收模型之间的差异在不同目标值下的内热源模型适用准则。     

Correlation of Plasma Sprayed Coating Deposition Efficiency with Volume Flux Measurements by Phase Doppler Anemometry (PDA)

The use of phase-Doppler anemometry (PDA) to characterize the detail in-flight plasma sprayed particle behavior has been demonstrated previously [Ma et al. Plasma Chem Plasma Process 24(1):85; 25(1):56] The present articles shows further that a direct relationship may exist between the PDA measured particle volume flux and the coating microstructure and deposition efficiency (DE). In the situation when the precise particle temperature information is not available, the PDA measured particle volume flux may provide an alternative to predict quantitatively the variation of the coating microstructure and the DE. By monitoring the in-flight particle volume flux variations, instead of the particle velocity, size and temperature individually and simultaneously, the optimal settings of the plasma spraying parameters may also be determined conveniently. However, it is noted that the effective applications of such approach depend largely on the particle surface morphology and the pre-determination of the particle size range.     

<Emphasis Type="Italic">Comment on</Emphasis>¶Low temperature specific heat of blue bronze K <Emphasis Type="Bold">0.30</Emphasis>MoO <Emphasis Type="Bold">3</Emphasis>, by J. Odin,J.C. Lasjaunias,K. Biljaković, K. Hasselbach,and P. Monceau

Eur. Phys. J. B 24, 315 (2001) Here we comment on a recently published paper on the presence of a phason contribution in the low temperature heat capacity data of the charge-density-wave compounds K_0.3MoO₃ and (TaSe₄)₂I. We have shown that the anomaly in the C _P / T ³ data reported by Odin et al. is straightforwardly interpreted in terms of low energy phonon modes resulting from the peculiar topology of these compounds. Received 21 February 2002 Published online 19 July 2002     

带强迫项变系数组合KdV方程的显式精确解

通过构造两个新的Riccati方程组，推广了Riccati方法，使其具有简洁的形式，丰富和发展了已有的结果，借助Mathematica软件，求出了带强迫项变系数组合KdV方程的一些精确解，包括各种类孤波解、类周期解和变速孤波解. 关键词： Riccati方程组 变系数组合KdV方程 强迫项 类孤波解     

300kVA高温超导变压器电流引线漏热损耗的测量

电流引线是高温超导变压器的主要外部漏热来源,它的漏热量直接影响了超导变压器的经济性能,因此,引线的设计与漏热测量一直备受关注。文中构建了一个实验方案,运用量热法测量低压引线的漏热,并将试验结果与仿真预期值进行了对比和分析,从而验证了仿真设计的正确性。     

HL-2Aƫ�����ṹ���켰�ȸ��ɷ���

根据HL-2A装置改造的初步方案,选择优化的偏滤器位形所决定的参数,设计出可采取的偏滤器结构及水冷方式。外靶板和拱顶板上采用双剪切连接件和环向水路具有极向水流的冷却方式。通过ANSYS编码对靶板的热负荷进行分析,结果表明这样的冷却方式在降低流速要求的条件下可以提高靶板表面承载能力。     

傅立叶超函数和扩充傅立叶超函数与爱米特热方程

证明了傅立叶超函数和扩充傅立叶超函数可用爱米特热方程的解来表示,且用以表示的解有很良好的性质.     

Numerical simulation and experimental validation of heat transfer within rotating flows for three‐dimensional non‐axisymmetric,turbulent conditions

A control volume type numerical methodology for the analysis of steady three‐dimensional rotating flows with heat transfer, in both laminar and turbulent conditions, is implemented and experimentally tested. Non‐axisymmetric momentum and heat transfer phenomena are allowed for. Turbulent transport is alternatively represented through three existing versions of the k–ε model that were adjusted to take into account the turbulence anisotropy promoted by rotation, streamline curvature and thermal buoyancy. Their relative performance is evaluated by comparison of calculated local and global heat balances with those obtained through measurements in a laboratory device. A modified version of the Lam and Bremhorst, low Reynolds number model is seen to give the best results. A preliminary analysis focused on the flow structure and the transfer of heat is reported. Copyright © 2002 John Wiley & Sons, Ltd.