Quantification of 1‐(propan‐2‐ylamino)‐4‐propoxy‐9H‐thioxanthen‐9‐one (TX5), a newly synthetized P‐glycoprotein inducer/activator,in biological samples: method development and validation

A simple, rapid and economical method was developed and validated for the analysis and quantification of 1‐(propan‐2‐ylamino)‐4‐propoxy‐9H ‐thioxanthen‐9‐one (TX5), a P‐glycoprotein inducer/activator, in biological samples, using reverse‐phase high‐performance liquid chromatography (HPLC). A C₁₈ column and a mobile phase composed of methanol–water (90/10, v /v) with 1% (v/v) triethylamine, at a flow rate of 1 mL/min, were used for chromatographic separation. TX5 standards (0.5–150 μm ) were prepared in human serum. Methanol was used for TX5 extraction and serum protein precipitation. After filtration, samples were injected into the HPLC apparatus and TX5 was quantified by a conventional UV detector at 255 nm. The TX5 retention time was 13 min in this isocratic system. The method was validated according to ICH guidelines for specificity/selectivity, linearity, accuracy, precision, limits of detection and quantification (LOD and LOQ) and recovery. The method was proved to be selective, as there were no interferences of endogenous compounds with the same retention time of TX5. Also, the developed method was linear (r ² ≥ 0.99) for TX5 concentrations between 0.5 and 150 μm and the LOD and LOQ were 0.08 and 0.23 μm , respectively. The results indicated that the reported method could meet the requirements for TX5 analysis in the trace amounts expected to be present in biological samples.     

Determination of MLN0128, an investigational antineoplastic agent,in human plasma by LC–MS/MS

MLN0128, an mTOR kinase inhibitor, is currently undergoing clinical investigation for treatment of a variety of cancers. To support this work, an LC–MS/MS method has been developed for the determination of MLN0128 in human plasma. A structural analog STK040263 was used as the internal standard. Both MLN0128 and the IS were first extracted from plasma using methyl tert ‐butyl ether; then separated on a Waters XTerra® MS C₁₈ column using a mobile phase consisting of methanol–acetonitrile–10.0 mm ammonium formate (34:6:60, v /v/v) at a flow rate of 0.300 mL min⁻¹. Quantitation of MLN0128 was done by positive electrospray ionization tandem mass spectrometry in multiple‐reaction‐monitoring mode. This method has a total run time of <4 min with the retention times of 1.95 and 2.94 min for the IS and MLN0128, respectively. The method has been validated per the US Food and Drug Administration guidance for bioanalytical method validation. It has a calibration range of 0.100–50.0 ng mL⁻¹ in human plasma with a correlation coefficient > 0.999. The overall assay accuracy and precision were ≤ ± 4 and ≤8%, respectively. The IS normalized recovery of MLN0128 was 98–100%. The stability studies showed that MLN0128 was stable under all tested conditions. The method developed may be useful for clinical studies of MLN0128.     

Conditions of stability and instability for a pair of arbitrarily stratified compressible fluids in an arbitrary non-uniform gravity field

The work continues and develops authors’ previous investigation of stability in the small for a two-layer system of inhomogeneous compressible fluids in the uniform gravity field. Here we present a solution of a similar problem in the case of arbitrary non-uniform potential gravity field. The equilibrium stratification of both density and elastic properties of the fluids is supposed arbitrary, as well as the shape of open on top reservoir filled by the fluids. The problem of stability of equilibrium is analyzed as the corresponding problem for the non-linearly elastic bodies, basing on the static energy criterion with regard for the boundary conditions at all parts of the boundary. The crucial element of the analysis is conversion of the quadratic functional of second variation of total potential energy of the system into a “canonical” form that enables to determine its sign. Making use of this canonical form, we obtain almost coinciding with each other necessary and sufficient conditions for stability (those being valid also for an arbitrary number of layers).     

On the determination of the point of fracture initiation by the load separation criterion in J-testing of ductile polymers

The application of an experimental approach based on the load separation criterion for the determination of the point of fracture initiation in a fracture test on a ductile polymer was critically examined. To this aim, the fracture process outlined by the application of this method was related to that described by the visual analysis of the fracture surfaces obtained in fracture tests on nominally identical specimens, in which different levels of crack extension were produced. The material examined was an acrylonitrile-butadiene-styrene (ABS) resin, and the fracture tests were performed at low loading rate on single-edge notched in bending specimens.The results demonstrated that this load separation criterion based methodology is a promising approach for the determination of the point of fracture initiation, and for material fracture resistance, J_Ic, evaluation. The method also has experimental simplicity and a high degree of repeatability.     

Determination of Anionic Surfactants in Water

The use of ternary complexes in the determination of anionic surfactants has been investigated and an analytical method using linear alkyl sulfonates as a test substance has been developed. The method involves the formation of the chloroform-extractable bisphenanthroline Cu(II)-linear alkyl sulfonate (LAS) complex and the subsequent equilibration of the extract with erythrosine to form the extractable bisphenanthroline Cu(II)-erythrosine complex. In the equilibration step erythrosine displaces LAS quantitatively, allowing the determination of the LAS originally present by measuring the absorbance of the extracted bisphenanthroline-Cu(II)-erythrosine complex. Results are reported of studies made to determine the optimum analytical conditions, the sensitivity, and the precision for the method described.     

A logarithmic regularity criterion for the 3D generalized MHD system

We prove a logarithmic regularity criterion for the 3D generalized magnetohydrodynamics (MHD) system with diffusion terms ?Δu and (?Δ)^βb, with . Copyright © 2015 John Wiley & Sons, Ltd.     

Development and validation of an LC–MS/MS method for the quantification of artificial sweeteners in human matrices

Artificial sweeteners are widely used as substitutes for sugar. The sweeteners are generally considered safe, however their whereabouts during pregnancy and lactation and the effect on child development are poorly explored. There is a need for new tools to measure these substances during pregnancy and lactation. Here, we describe the development and validation of a sensitive liquid chromatography–tandem mass spectrometry method for the simultaneous quantification of acesulfame, cyclamate, saccharin and sucralose in human plasma, umbilical cord blood, amniotic fluid and breast milk. The samples were prepared by protein precipitation and separated on a Luna Omega Polar C₁₈ column (2.1 × 50 mm, 1.6 μm). Electrospray ionization in negative mode and multiple reaction monitoring were used to monitor the ion transitions. The validated concentration ranges were from 1 to 500 ng/ml (10–500 ng/ml for sucralose). Interassay precisions were all ≤15% and the accuracies were within ±15%. Stability, linearity, dilution integrity, carryover and recovery were also examined and satisfied the validation criteria. Finally, this analytical method was successfully applied on spiked samples of plasma, umbilical cord blood, amniotic fluid and breast milk, proving its suitability for use in clinical studies on artificial sweeteners, including during pregnancy and lactation.     

Development of GC–MS/MS method for environmental monitoring of 49 pesticide residues in food commodities in Al-Rass,Al-Qassim region,Saudi Arabia

The harmful effects of pesticide residues are a threat to our health. Therefore, the current study aimed to validate a simple method for the determination of pesticide residues in commonly consumed fruits and vegetables from Al-Rass, Al-Qassim region, Saudi Arabia. A total of 1430 samples were collected from a local market and then analyzed for monitoring of 49 pesticide residues. A quick, easy, cheap, effective, rugged, and safe (QuEChERS) multi-residue extraction method followed by gas chromatography equipped with triple-quadrupole mass spectrometry (GC–MS/MS) was successfully implemented. This 17-min-run analytical method detects and quantifies pesticide residues with acceptable validation performance parameters in terms of sensitivity, selectivity, linearity, the limit of quantification, accuracy, and precision. The linear range of the calibration curves ranged from 10 to 300 µg/L, all the pesticide LODs ranged from 0.0005 to 0.0024 mg/kg, and the pesticide LOQs ranged from 0.0011 to 0.0047 mg/kg. The recovery values at the three fortification levels ranged from 78 % to 107 %, and the precision values (expressed as RSD%) were less than 20 % for all of the investigated analytes. The results showed that 138 (9.65 %) of the analyzed samples were contaminated with pesticide residues, 40 (2.80 %) of the analyzed samples exceeded the maximum residue limit (MRL) of the European Commission regulations (EC) for pesticides residues, 98 (6.85 %) of the analyzed samples were contaminated with residues below the MRL, and 1292 (90.35 %) of the analyzed samples were pesticide residue-free. Coriander contained the highest percentage (46.88 %) of pesticide residues, particularly tetradifon that representing 18.75 % noncompliance with the MRL, followed by parsley, with 20.59 % pesticide residues (10.29 % non-compliance). Multiple pesticide residues were observed most frequently in tomatoes and dates which were contaminated with buprofezin and ethion respectively.     

Advances in nucleic acid architectures for electrochemical sensing

Nucleic acid–based electrochemical sensors are ideally suited to the detection of molecular targets for which enzymatic detection or direct electrochemical oxidation – reduction reactions are not possible. Moreover, the versatility of nucleic acids in their ability to bind a great variety of target types, from small molecules to single-entity mesoscopic targets, makes them attractive receptors for the development of electrochemical biosensors. In this brief opinion piece, we discuss field advances from the past two years. We hope the works highlighted here will inspire the community to pursue creative designs enabling the detection of larger and more complex targets with a specific focus on analytical validation and translation into preclinical or clinical applications.     

Using Design of Experiments to Optimize a Screening Analytical Methodology Based on Solid-Phase Microextraction/Gas Chromatography for the Determination of Volatile Methylsiloxanes in Water

Volatile methylsiloxanes (VMSs) constitute a group of compounds used in a great variety of products, particularly personal care products. Due to their massive use, they are continually discharged into wastewater treatment plants and are increasingly being detected in wastewater and in the environment at low concentrations. The aim of this work was to develop and validate a fast and reliable methodology to screen seven VMSs in water samples, by headspace solid-phase microextraction (HS-SPME) followed by gas chromatography with flame ionization detection (GC-FID). The influence of several factors affecting the extraction efficiency was investigated using a design of experiments approach. The main factors were selected (fiber type, sample volume, ionic strength, extraction and desorption time, extraction and desorption temperature) and optimized, employing a central composite design. The optimal conditions were: 65 µm PDMS/Divinylbenzene fiber, 10 mL sample, 19.5% NaCl, 39 min extraction time, 10 min desorption time, and 33 °C and 240 °C as extraction and desorption temperature, respectively. The methodology was successfully validated, showing low detection limits (up to 24 ng/L), good precision (relative standard deviations below 15%), and accuracy ranging from 62% to 104% in wastewater, tap, and river water samples.