Evaluation of measurement uncertainty for analytical procedures using a linear calibration function

In the EURACHEM/CITAC draft ”Quantifying uncertainty in analytical measurement” estimations of measurement uncertainty in analytical results for linear calibration are given. In this work these estimations are compared, i.e. the uncertainty deduced from repeated observations of the sample vs. the uncertainty deduced from the standard residual deviation of the regression. As a result of this study it is shown that an uncertainty estimation based on repeated observations can give more realistic values if the condition of variance homogeneity is not correctly fulfilled in the calibration range. The complete calculation of measurement uncertainty including assessment of trueness is represented by an example concerning the determination of zinc in sediment samples using ICP-atomic emission spectrometry. Received: 9 February 2002 Accepted: 17 April 2002     

Validation steps for traceability of linear calibrated chemical measurements

Based on the new draft of the EURACHEM/CITAC Guide Traceability in Chemical Measurement, this publication describes how traceability can be achieved for chemical measurements using a linear calibration function. Traceability can be accomplished without larger expenditure, if the measurement is calibrated on the basis of appropriate reference standards and the linear regression employed is selected and validated statistically in a suitable form. The determination of nickel in aqua regia eluates of sediment samples, employed for an ICP-OES measurement, is used as a practical illustration of this approach.     

Validation of a screening method for the simultaneous identification of fat-soluble and water-soluble vitamins (A,E, B<Subscript>1</Subscript>, B<Subscript>2</Subscript> and B<Subscript>6</Subscript>) in an aqueous micellar medium of hexadecyltrimethylammonium chloride

Simultaneous determination of the fat-soluble vitamins A and E and the water-soluble vitamins B₁, B₂ and B₆ has been carried using a screening method from fluorescence contour graphs. These graphs show different colour zones in relation to the fluorescence intensity measured for the pair of excitation/emission wavelengths. The identification of the corresponding excitation/emission wavelength zones allows the detection of different vitamins in an aqueous medium regardless of the fat or water solubility of each vitamin, owing to the presence of a surfactant which forms micelles in water at the used concentration (over the critical micelle concentration). The micelles dissolve very water insoluble compounds, such as fat-soluble vitamins, inside the aggregates. This approach avoids the use of organic solvents in determining these vitamins and offers the possibility of analysing fat- and water-soluble vitamins simultaneously. The method has been validated in terms of detection limit, cut-off limit, sensitivity, number of false positives, number of false negatives and uncertainty range. The detection limit is about g L^–1. The screening method was applied to different samples such as pharmaceuticals, juices and isotonic drinks.     

Performance validation of step-isothermal calorimeters

Isothermal calorimetry is becoming indispensable as a tool for the study of a wide variety of systems. As with all scientific instruments it is essential that robust calibration routines be developed in order to validate the data obtained. Chemical test reactions offer many advantages over (the traditionally used) joule effect heating methods, not least because they have the potential to validate instrument performance (i.e. they can be used to assess all aspects of calorimeter operation). In this work the results of a validation exercise, conducted by Thermal Hazard Technology as part of an installation routine, using the base catalysed hydrolysis of methyl paraben are discussed. In the case described, a systematic misreporting of the reported temperature of a calorimeter was identified, caused by an upgrade to the calorimeter's firmware, a discrepancy which may not have been noted using traditional electrical calibration methods and one which highlights the importance of both manufacturers and end-users adopting chemical test reactions into their test and validation routines.     

Determination of ivermectin B(1a) in animal plasma by liquid chromatography combined with electrospray ionization mass spectrometry

A novel, sensitive and specific method for the quantitative determination of ivermectin B(1a) in animal plasma using liquid chromatography combined with positive electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS) is presented. Abamectin was used as the internal standard. Extraction of the samples was performed with a deproteinization step using acetonitrile. Chromatographic separation was achieved on a Nucleosil ODS 5 microm column, using gradient elution with 0.2% (v/v) acetic acid in water and 0.2% (v/v) acetic acid in acetonitrile. The method was validated according to the requirements defined by the European Community. Calibration curves using plasma fortified between 1 and 100 ng ml(-1) showed a good linear correlation (r > or = 0.9989, goodness-of-fit coefficient < or =8.1%). The trueness at 2 and 25 ng ml(-1) (n = 6) was +4.2 and -17.1%, respectively. The trueness and between-run precision for the analysis of quality control samples at 25 ng ml(-1) was -4.0 and 11.0%, respectively (n = 16). The limit of quantification of the method was 1.0 ng ml(-1), for which the trueness and precision also fell within acceptable limits. Using a signal-to-noise ratio of 3 : 1, the limit of detection was calculated to be 0.2 ng ml(-1). The specificity was demonstrated with respect to ivermectin B(1b).The method was successfully used for the quantitative determination of ivermectin B(1a) in plasma samples from treated bovines, demonstrating the usefulness of the developed method for application in the field of pharmacokinetics.     

Numerical calculation of domains of analyticity for perturbation theories in the presence of small divisors

We study numerically the complex domains of validity for KAM theory in generalized standard mappings. We compare methods based on Padé approximants and methods based on the study of periodic orbits.     

Applications of Thermal Analysis and Coupled Techniques in Pharmaceutical Industry

Thermal analysis methods are well-established techniques in research laboratories of pharmaceutical industry. The robustness and sensitivity of instrumentation, the introduction of automation and of reliable software according to the industrial needs widened considerably the areas of applications in the last decade. Calibration of instruments and validation of results follow the state of the art of cGMP as for other analytical techniques. Thermal analysis techniques are especially useful for the study of the behavior of the poly-phasic systems drug substances and excipients and find a unique place for new delivery systems. Since change of temperature and moisture occur by processing and storage, changes of the solid state may have a considerable effect on activity, toxicity and stability of compounds. Current requirements of the International Conference of Harmonisation for the characterization and the quantitation of polymorphism in new entities re-enforce the position of thermal analysis techniques. This challenging task needs the use of complementary methods. Combined techniques and microcalorimetry demonstrate their advantages. This article reviews the current use of thermal analysis and combined techniques in research and development and in production. The advantage of commercially coupled techniques to thermogravimetry is emphasized with some examples. This revised version was published online in August 2006 with corrections to the Cover Date.     

Expert systems for method development and validation in HPLC

ESCA, Expert Systems Applied to Chemical Analysis, started its research in March 1987, with the aim of building prototype expert systems for HPLC method development. Results of this research have been published as the work has progressed. The project is now completed and this paper summarises some of the overall project conclusions. Seven different expert systems have been built which tackle problems throughout the process of method development, four stand-alone systems and three integrated systems. The object of ESCA was to evaluate the applicability of expert system technology to analytical chemistry and not all the systems were built for commercial uses. Many of the systems tackle problems specific to one or more of the partners and thus may not be useful outside this environment. However, the results of the work are still pertinent to analysts wishing to build their own systems. These results are described, however, the emphasis of the paper is on those systems developed for method validation.Method validation for HPLC is a complex task which requires many characteristics of the method to be tested, e.g. accuracy, precision, etc. The expert systems built within ESCA concern the validation of precision. Two systems were developed for repeatability testing and ruggedness testing. The method validation process can be divided into several discrete stages, these include: (1) The selection of the method feature to test, for instance which factors can influence the ruggedness of a method. (2) The definition of a test procedure, for instance an efficient statistical design. (3) The execution of experiments and the interpretation of results. (4) A diagnosis of any observed problem. This paper describes these two systems in some detail and summarises some of the results obtained from their evaluation. It concludes that expert systems can be useful in solving analytical problems and the integration of several expert systems can provide extremely powerful tools for the analyst.     

Investigation of the limitations of saturated fractional factorial experimental designs,with confounding effects for an HPLC ruggedness test

Summary Recently much attention has been directed to the validation of analytical methods. The level of validation will depend on the method application. If a method is developed for general use, for instance by different analysts, instruments or laboratories, then the effect of these changes need evaluation. This is normally referred to as ruggedness testing, where the limitations of the method to changes in the specified conditions are examined.This paper examines the use of Plackett-Burman fractional factorial experiment designs for ruggedness testing in high performance liquid chromatography (HPLC). The ability of these designs to identify confounding effects is applied to the stability indicating analysis of Salbutamol and its major degradation product, AH4045. The results show that confounding effects, proving extremely pertinent to HPLC, can be identified.The assay proved rugged to most tested changes although not to the use of column packing material from different manufacturers.