Thin layer distillation for matrix isolation in flow analysis

Analyte transfer from the matrix in a thin layer distillation (TLD) cell and its subsequent measurement were investigated in a flow injection configuration. We designed the cell such that the donor and acceptor streams flowed in parallel channels separated by a thin dividing wall. The matrix transfer process involved room-temperature distillation of the analyte into the headspace of the TLD cell and its subsequent condensation/uptake by a concurrently flowing acceptor stream. There are no membranes; hence there are no membrane-related problems. The TLD system design was optimized with respect to its dimensions and operational parameters. Throughput and sensitivity were compared with a conventional pervaporation flow injection (PFI) system for ammonia and five different amines. For the higher molecular mass amines, the TLD approach provided comparable or superior performance. The TLD technique should be an attractive approach for online analysis of volatile chemical species in ‘dirty’ samples, especially for volatile analytes of higher molecular mass.     

Method of fast trace microanalysis of the chiral pesticides epoxiconazole and novaluron in soil samples using off-line flow-through extraction and on-column direct large volume injection in reversed-phase high performance liquid chromatography

An analytical method combining off-line flow-through extraction of a soil micro-sample (mass around 100 mg, packed into a short HPLC glass column) and direct on-column large-volume injection (LVI up to 1.00 mL) of a methanol-water soil extract onto a conventional C18 RP HPLC column enabled fast (within 3.5 minutes) trace micro-analysis of the relatively new chiral pesticides epoxiconazole (E) and novaluron (N), respectively. Linear calibration curves were evaluated from UV detection (230 nm) data in the range from 0.1 to 5 mg/kg in three most abundant Slovak agricultural soils. LOD (confidence band) at the levels 0.08-0.11 mg/kg and LOQ 0.4-0.6 mg/kg and LOD (S/N = 3) at the levels 0.007-0.018 mg/kg and LOQ (S/N = 10) 0.024-0.060 mg/kg, respectively, of dry soil were achieved. Recovery of pesticides in the overall LVI method including flow-through 130-200 mg soil micro-sample extraction was: for epoxiconazole from 74 to 85% and from 56% to 90% for novaluron with reproducibility within +/- 6% RSD. This fast (30 min) and simple method consists of just three steps which are short column filling with a solid micro-sample; flow-through liquid extraction and direct large-volume injection RP HPLC DAD analysis. The method is prepared for automation and further analysis of enantiomers of both investigated pesticides by achiral-chiral column switching techniques.     

Determination of phosphate using a highly sensitive paired emitter-detector diode photometric flow detector

The use of a novel inexpensive photometric device, a paired emitter-detector diode (PEDD) has been applied to the colorimetric determination of phosphate using the malachite green spectrophotometric method. The novel miniaturized flow detector applied within this manifold is a highly sensitive, low cost, miniaturized light emitting diode (LED) based detector. The optical flow cell was constructed from two LEDs, whereby one is the light source and the second is the light detector, with the LED light source forward biased and the LED detector reversed biased. The photocurrent generated by the LED light source discharges the junction capacitance of the detector diode from 5 V (logic 1) to 1.7 V (logic 0) and the time taken for this process to occur is measured using a simple timer circuit.The malachite green (MG) method employed for phosphate determination is based on the formation of a green molybdophosphoric acid complex, the intensity of which is directly related to phosphate concentration. Optimum analytical parameters such as reaction kinetics, reagent to sample concentration ratio and emitter wavelength intensity were investigated for the spectrophotometric method. Linear calibration plots that obeyed the Beer-Lambert law were obtained for phosphate in the range of 0.02-2 μM. The dynamic range, sensitivity and limits of detection are reported.     

Flow‐Assisted Synthesis of [10]Cycloparaphenylene through Serial Microreactions under Mild Conditions

Cycloparaphenylene (CPP) has been recognized as an attractive template for the bottom‐up synthesis of carbon nanotubes with uniform diameter, and is important for the chemistry of graphitic as well as ring‐shaped macromolecules. However, the reported routes from halogenated benzenes have suffered from low yields even under time‐ and labor‐consuming multistep conditions. Herein we report a flow‐assisted synthesis of [10]CPP in four steps under mild conditions. For the synthesis, a selective nucleophilic addition of the unprotected diketone without the double‐added byproduct was achieved within 3 s in high yield. Subsequently, the obtained compound was reacted with dilithiated benzene at 25 °C to form a U‐shaped precursor for CPP in a separate microreactor, which was finally dimerized and aromatized to obtain [10]CPP by a two‐step in‐flask reaction. Precise control of time and flow facilitated by the flow‐assisted system enabled the development of an efficient synthetic route for [10]CPP.     

Facile Conversion of Red Phosphorus into Soluble Polyphosphide Anions by Reaction with Potassium Ethoxide

Soluble polyphosphide anions were successfully generated in a number of organic solvents by the reaction between shelf‐stable red phosphorus and potassium ethoxide. The species were identified by ³¹P NMR spectroscopy in solution and by X‐ray crystal‐structure determination of (Bu₄N)₂P₁₆ in the solid state. The reaction was scaled up to gram quantities by using a flow‐chemistry process.     

Structure–Activity Studies of Cysteine‐Rich α‐Conotoxins that Inhibit High‐Voltage‐Activated Calcium Channels via GABAB Receptor Activation Reveal a Minimal Functional Motif

α‐Conotoxins are disulfide‐rich peptides that target nicotinic acetylcholine receptors. Recently we identified several α‐conotoxins that also modulate voltage‐gated calcium channels by acting as G protein‐coupled GABA_B receptor (GABA_BR) agonists. These α‐conotoxins are promising drug leads for the treatment of chronic pain. To elucidate the diversity of α‐conotoxins that act through this mechanism, we synthesized and characterized a set of peptides with homology to α‐conotoxins known to inhibit high voltage‐activated calcium channels via GABA_BR activation. Remarkably, all disulfide isomers of the active α‐conotoxins Pu1.2 and Pn1.2, and the previously studied Vc1.1 showed similar levels of biological activity. Structure determination by NMR spectroscopy helped us identify a simplified biologically active eight residue peptide motif containing a single disulfide bond that is an excellent lead molecule for developing a new generation of analgesic peptide drugs.     

Continuous‐Flow Microwave Synthesis of Metal–Organic Frameworks: A Highly Efficient Method for Large‐Scale Production

Metal–organic frameworks are having a tremendous impact on novel strategic applications, with prospective employment in industrially relevant processes. The development of such processes is strictly dependent on the ability to generate materials with high yield efficiency and production rate. We report a versatile and highly efficient method for synthesis of metal–organic frameworks in large quantities using continuous flow processing under microwave irradiation. Benchmark materials such as UiO‐66, MIL‐53(Al), and HKUST‐1 were obtained with remarkable mass, space–time yields, and often using stoichiometric amounts of reactants. In the case of UiO‐66 and MIL‐53(Al), we attained unprecedented space–time yields far greater than those reported previously. All of the syntheses were successfully extended to multi‐gram high quality products in a matter of minutes, proving the effectiveness of continuous flow microwave technology for the large scale production of metal–organic frameworks.     

Visible Light Activation of Boronic Esters Enables Efficient Photoredox C(sp2)–C(sp3) Cross‐Couplings in Flow

We report herein a new method for the photoredox activation of boronic esters. Using these reagents, an efficient and high‐throughput continuous flow process was developed to perform a dual iridium‐ and nickel‐catalyzed C(sp²)–C(sp³) coupling by circumventing solubility issues associated with potassium trifluoroborate salts. Formation of an adduct with a pyridine‐derived Lewis base was found to be essential for the photoredox activation of the boronic esters. Based on these results we were able to develop a further simplified visible light mediated C(sp²)–C(sp³) coupling method using boronic esters and cyano heteroarenes under flow conditions.     

Integrated Photoelectrochemical Solar Energy Conversion and Organic Redox Flow Battery Devices

Building on regenerative photoelectrochemical solar cells and emerging electrochemical redox flow batteries (RFBs), more efficient, scalable, compact, and cost‐effective hybrid energy conversion and storage devices could be realized. An integrated photoelectrochemical solar energy conversion and electrochemical storage device is developed by integrating regenerative silicon solar cells and 9,10‐anthraquinone‐2,7‐disulfonic acid (AQDS)/1,2‐benzoquinone‐3,5‐disulfonic acid (BQDS) RFBs. The device can be directly charged by solar light without external bias, and discharged like normal RFBs with an energy storage density of 1.15 Wh L^?1 and a solar‐to‐output electricity efficiency (SOEE) of 1.7 % over many cycles. The concept exploits a previously undeveloped design connecting two major energy technologies and promises a general approach for storing solar energy electrochemically with high theoretical storage capacity and efficiency.