Enhancement of ferromagnetic resonance in Al203-doped CozFeAI Heusler alloy film prepared by oblique sputtering

Large and variable in-plane uniaxial magnetic anisotropy in a nanocrystalline （Co2FeA1）97.8（Al2O3）2.2 soft magnetic thin film is obtained by an oblique sputtering method without being induced by magnetic field or post anneaiing. The in-plane uniaxiai magnetic anisotropy varies from 50 Oe to 180 Oe （1 Oe=79.5775 A·m-1） by adjusting the sample＇s position. As a result, the ferromagnetic resonance frequency of the film increases from 1.9 GHz to 3.75 GHz.     

单轴〈111〉应力硅价带结构计算

基于k·p微扰法计算了单轴〈111〉应力作用下硅的价带结构, 并与未受应力时体硅的价带结构进行了比较. 给出了单轴〈111〉应力作用下硅价带顶处能级的移动、分裂以及空穴有效质量的变化情况. 计算所得未受应力作用时硅价带顶处重空穴带、轻空穴带有效质量与相关文献报道体硅有效质量结果一致. 拓展了单轴应力硅器件导电沟道应力与晶向的选择范围,给出的硅价带顶处重空穴带、轻空穴带能级间的分裂值和有效质量随应力的变化关系可为单轴〈111〉应力硅其他物理参数的计算提供参考. 关键词： 单轴应力硅 k·p法')" href="#">k·p法 价带结构     

Simultaneous measurement of transient stress and flow birefringence in one-sided compression (biaxial extension) of a polymer melt

Summary Investigation of time dependent behaviour of a polystyrene melt is carried out with the aid of a new apparatus for biaxial extension. Use is made of the method of two impinging fluid streams guided by lubricated trumpet shaped metal walls. The flow birefringence is measured in the plane of symmetry and, at the same time, the force is measured which tends to separate the trumpets. The linear stress-optical relation turns out to be valid in this new flow geometry. An accurate value for the stress-optical coefficient can be determined from the relaxation experiments. The stress build-up as calculated from the optical measurements, is compared with the pertinent result of the theory of linear viscoelasticity. For the desired interconversion of dynamic moduli use is made of the approximation by Schwarzl and Struik. The steady state measurements are checked by the results of the non-linear model of Acierno et al.With 16 figures and 2 tables     

The electronic properties and electron transport of sawtooth penta-graphene nanoribbon under uniaxial strain: ab-initio study

ABSTRACT

The electronic properties and electron transport of a sawtooth penta-graphene nanoribbon (SSPGNR) under uniaxial strains are theoretically studied by density-functional theory (DFT) in combination with the non-equilibrium Green's function formalism. We investigated the electronic structures and the current–voltage (I–V) characteristics of the SSPGNRs under a sequence of uniaxial strains in range from 10% compression to 10% stretch. In this strained range, carbon atoms still keep a pentagon network, but with the changing bond lengths. The C–C bond lengths change almost linearly with the tolerable strain. The value of the band gap of SSPGNRs can be depicted as a parabola under uniaxial strain. Our calculations show that the current is monotonous increase with compressive strain at the same applied bias voltage. In case of tensile strain, the variable rule of the current is different that it increases at first and decrease later. The fundamental physical properties (band structure, I–V characteristic) of SSPGNRs seem to be more sensitive to compressive strain than the stretch strain. The current intensity of the compressive-SSPGNR is by 2 orders of magnitude compared to that of the tensile-SSPGNR at the same strain in range from 6% to 10%. The results obtained from our calculations are beneficial to practical applications of these strained structures in SSPGNRs-based electromechanical devices.     

FeCoCrCuNi高熵合金裂纹及孔洞结构力学与微观构象演化机理的分子动力学模拟研究

本文采用分子动力学方法研究了FeCoCrCuNi高熵合金裂纹及孔洞模型结构在不同轴向拉伸应变速率下的力学与微观结构演化机理. 结果表明：应变速率越高FeCoCrCuNi裂纹结构对应更高的过冲应变和过冲应力,其主要原因是高拉伸速率会导致高强度的BCC结构及孪晶结构的生成,而BCC结构及孪晶结构的产生进而会抑制应力的下降,通过应力-应变曲线,可知FeCoCrCuNi裂纹模型在轴向应力作用下表现为塑性形变. 对于不同尺寸的孔洞FeCoCrCuNi裂纹模型的应力模拟与结构分析,可以得出：孔洞尺寸越大, FeCoCrCuNi裂纹结构对应的过冲应变和过冲应力越小,其主要原因是大尺寸的孔洞造成孔洞之间产生裂纹的,进而会影响这个材料的屈服应变和屈服强度.     

Orientation dependence of structural transition in fcc Al driven under uniaxial compression by atomistic simulations

By molecular dynamics simulations employing an embedded atom method potential,we have investigated structural transformations in single crystal Al caused by uniaxial strain loading along the [001],[011] and [111] directions. We find that the structural transition is strongly dependent on the crystal orientations. The entire structure phase transition only occurs when loading along the [001] direction,and the increased amplitude of temperature for [001] loading is evidently lower than that for other orientations. The morphology evolutions of the structural transition for [011] and [111] loadings are analysed in detail. The results indicate that only 20% of atoms transit to the hcp phase for [011] and [111] loadings,and the appearance of the hcp phase is due to the partial dislocation moving forward on {111} fcc family. For [011] loading,the hcp phase grows to form laminar morphology in four planes,which belong to the {111} fcc family; while for [111] loading,the hcp phase grows into a laminar structure in three planes,which belong to the {111} fcc family except for the (111) plane. In addition,the phase transition is evaluated by using the radial distribution functions.     

单轴晶体内表面入射e光线的双反射

基于光线遵从的Fermat原理,从几何学的角度讨论和分析了在单轴晶体中入射的e光线在界面上的双反射,得到了确定光线反射方向的一般公式,并对几种特殊情况进行了讨论.指出了上述结果与由电磁波的边界条件计算所得结果是一致的.     

Influences of nonlinear interactions of polaritons in uniaxial crystals

We have analysed theoretically the polarization and dielectric constant of uniaxial ionic crystals,including the effect of the nonlinear interactions between ions.The spectrum of polaritons(coupling modes of photons and optical phonons) under nonlinear interactions was developed.A new branch of dispersion relations emerges in the original frequency gap.     

单轴晶体包层啁啾光纤光栅中电光效应和弹光效应的理论研究

提出了以单轴晶体材料为包层,光轴平行于光栅主轴(z轴)的新型啁啾光纤光栅模型,应用耦合模理论和传输矩阵方法在理论上分析了该类光纤光栅中的电光效应和弹光效应,理论研究发现在包层施加沿光栅轴向的电场和应变场可以改变布拉格波长和反射谱。得到了3种不同单轴晶体为包层时布拉格波长λB和反射光谱随外加电场和应变场变化的曲线。研究结果表明当轴向外加电场从1×107V/m变化到8×107V/m时λB减小0.12nm,当外加应变场从0变化到0.04时,λB减小0.45nm。     

可控空心光束在单轴晶体中的传输特性

基于光束在各向异性单轴介质中的傍轴矢量传输理论,对可控空心光束(CDHB)在单轴晶体中的传输特性作了研究.得出该光束在单轴晶体中传输的横向慢变振幅的表达式,并利用此表达式作数值计算,研究了CDHB在单轴晶体中的传输特性.研究表明,可控空心光束在单轴晶体中传输时,控制参数ξ和光束阶数N的取值对其光强分布有较大的影响.随着...