New type of spherical pore Al alloy foam with low porosity and high strength

The Ultra Light Metal Structure with variouskinds of pores (open, close) realizes the lightness andmultifunction of structural material. The functionsinclude lightness (ρ < 1), high specific strength, highenergy absorption, sound insulation, heat insulationand electromagnetism shield. It is one of the hotspotsin material research nowadays[1— . The requirements 6]of high speed movement and high technology make Alalloy foam, which has higher specific st…     

Deformational Properties of Irradiated Composite Materials Based on PET and PE

Considering the wide applicability of polymeric composite materials, heterogeneous blends of poly(ethylene terephtalate) (PET) and polyethylenes of high and low densities (HDPE and LDPE, respectively) were investigated. Rheological (the flow-behavior index), mechanical (the yield strength and the Charpy impact strength), and morphological (crystallinity and the melting temperature) properties were detected for individual blend components and different blend compositions. A radiation treatment (-rays) was applied to improve certain characteristics of the heterogeneous blends. The results of this investigation show that the radiation modification can be successfully used to improve some physical properties of the PET-based blends and to choose individual blend components, optimum irradiation conditions, and desirable blend compositions, which allows producing materials with a predictable set of mechanical properties.     

On the irregularity strength of trees

For any graph G, let n_i be the number of vertices of degree i, and . This is a general lower bound on the irregularity strength of graph G. All known facts suggest that for connected graphs, this is the actual irregularity strength up to an additive constant. In fact, this was conjectured to be the truth for regular graphs and for trees. Here we find an infinite sequence of trees with λ(T) = n₁ but strength converging to . © 2004 Wiley Periodicals, Inc. J Graph Theory 45: 241–254, 2004     

基于XRD的镀锌钝化膜残余应力试验研究

利用XRD技术测试了镀锌钝化膜结合界面的残余应力，同时通过电解抛光法检测了其厚度方向残余应力的分布规律，分析了残余应力对镀锌钝化膜结合强度的影响. 试验结果表明，镀锌钝化膜的残余应力均表现为压应力，并随着基体表面残余应力的增大而减小；钝化膜在2—10μm厚度方向的残应力为-274.5—-428.3MPa，其应力为梯度分布；镀锌钝化膜与基体的界面结合强度与其残余应力成反比，减小薄膜残余应力，有利于提高镀锌钝化膜与基体的结合强度. 关键词： X射线衍射法(XRD) 镀锌钝化膜 结合强度 残余应力     

Mn22+离子1s22s-1s2np的偶极跃迁能和振子强度

用全实加关联方法计算了类锂Mn22 离子1s22s-1s2np(2≤n≤9)的偶极跃迁能和振子强度.1s2np(2≤n≤9)态的精细结构通过计算自旋-轨道与自旋-其他轨道相互作用算符的期待值确定.依据单通道量子亏损理论,确定了Rydberg系列1s2np的量子数亏损.从而可以用这些作为能量的缓变函数的量子亏损,实现对任意高激发态(n≥10)的能量的可靠预言.将这些分立态振子强度与单通道量子亏损理论相结合,得到在电离阈附近束缚态-束缚态跃迁振子强度以及束缚态-连续态跃迁的振子强度密度,从而将Mn22 离子的这一重要光谱特性的理论预言外推到整个能域.     

Ultrasonic characterization of heavy metal TeO2–WO3–PbO glasses below room temperature

The longitudinal ultrasonic attenuation measurements have been made using pulse echo method at fundamental frequencies of 2, 4, 6 and 8 MHz in 20WO₃–(80−x) TeO₂–xPbO ternary tellurite glasses (x=10, 12.5, 15, 17.5 and 20 mol%) in the temperature range 160–280 K. The results showed the presence of a broad peak which shifts to higher temperature with increasing frequency. The ultrasonic attenuation peaks suggest that the experimental behavior is controlled by thermally activated structural relaxations. The internal friction, acoustic activation energy, deformation potential, relaxation strength, number of loss centers and density of state have been calculated both as a function of temperature and PbO content. The acoustic activation energy was found to decrease from 0.156 to 0.135 eV with the increase of PbO content. The results showed that both the number of loss centers and their activation energy decrease with the atomic ring size. An increase in the density of state is observed with addition of PbO content at the same frequency in the whole range of temperature which is associated with structural units formed when PbO is added.     

ICF靶用空心玻璃微球耐压性能测试

 利用自行研制的空心微球耐外压装置和充气装置，测试了目前激光惯性约束聚变实验打靶使用的空心玻璃微球耐内压能力和耐外压能力。空心玻璃微球采用液滴法制备，直径为180～250 mm、壁厚为0.8~4.0 mm。理论计算表明，当微球纵横比超过90时，耐外压能力与球壳材料的杨氏模量有关，由此测量得到的空心玻璃微球杨氏模量为55~75 GPa。玻璃微球的耐内压能力主要与球壳材料的抗拉强度有关，实验测量得到的玻璃微球抗拉强度为90~140 MPa。     

The dependence of structure and properties of polycrystalline diamonds (PCD) on the conditions of their production

Abstract

AES and SIMS were used to analyze the diamond powders surface composition using LAS-3000 device. It is found that impurities on diamond particles surfaces have a detrimental effect on the PCD sintering and physico-mechanical properties of the product.     

套管外压挤毁强度分析与计算

在对大量的套管全尺寸挤毁试验结果分析的基础上，提出套管外压失稳机理：实际工程中的套管截面不是理想圆，在外压作用下的非圆套管圆周方向上环向应力分布不均匀，有附加弯矩效应；随外压增加，在最大压缩环向应力处达到屈服；当屈服逸到一定程度时，材料由于强度承载力不足而失效，导致套管发生失稳挤毁。基于上述套管强度挤毁准则，分析了理想弹塑性套管在轴向载荷作用下的抗挤强度计算方法，得到较保守的套管挤毁压力计算公式。与试验结果对比表明：导出的计算公式偏差较小，计算精度满足工程要求，失稳强度准则是适用的。     

Stress distribution in poly‐p‐phenylenebenzobisoxazole (PBO) fiber estimated from vibrational spectroscopic measurement under tension. II. Analysis of inhomogeneous stress distribution in PBO fiber

Fourier transform Raman spectra were measured for poly‐p‐phenylenebenzobisoxazole (PBO) fiber subjected to a tensile stress, and the Raman shift factor (the frequency shift caused by 1 GPa tensile stress) depended strongly on the sample‐preparation condition. To clarify the reasons of this dependency, a mechanical series parallel model was adopted that could successfully and quantitatively explain the observed Raman shift factors and gave a concreate heterogeneous stress distribution in the PBO fibers. As a result, a mechanical series model was reasonable for PBO fiber. Broadening of Raman bands, which was observed when the PBO fiber was tensioned, could also be interpreted on the basis of an idea of heterogeneous stress distribution. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1281–1287, 2002