车站咽喉通过能力可视化计算集成系统的研究

在对国内外咽喉道岔通过能力计算方法比较与分析基础上 ,论文提出了车站咽喉通过能力可视化计算集成系统的系统结构和功能设计 ,应用图论和网络优化技术对车站咽喉布置、咽喉及车站作业过程进行抽象建模 ,建立了咽喉作业占用安排网络优化和咽喉作业能力的复合递阶决策模型 .该研究综合运用上述模型、算法、计算机信息处理技术和图形技术 ,可视化模拟咽喉作业情况 ,实现了核心基础数据计算机模拟采集、作业优化安排和最大可实现能力的查定及优化 ,并将结果以图形方式输出 .通过实例验证表明 ,计算结果合理可信 ,可用于车站咽喉能力的评价检验 .     

Bi2223/Ag带小型高温超导实验磁体设计

Bi2223／Ag带材的强各向异性决定了其临界电流对垂直于带材表面的磁场非常敏感，这是该带材在高温超导磁体等强电应用方面的不利因素。我们从减小磁体最大径向场BRmax对磁体运行电流的影响、充分利用超导材料的原则出发，讨论了高温超导磁体的设计方法。在小型Bi2223／Ag实验磁体的设计中，根据对径向磁场的计算、分析，确定了磁体的工作点。     

有生产能力、生产设置费和库容量限制的生产——库存最低成本计划方法

本文应用凹函数最小值定理和动态规划方法，得到了在库容量、生产能力和生产设置费均为有限的一般情形下多阶段确定性最低生产——库存费用产品生产计划的简易编制方法。应用中的一些同类方法可作为它的特例。本算法操作简单，既可以普及到一般计划编制人员，也可方便地编制成计算机程序，作为决策支持系统的单元模型。     

Thermoelastoplastic Bending of Complexly Reinforced Plates

A problem on the transverse-longitudinal bending of reinforced plates of variable thickness under a thermal-force loading is formulated. A qualitative analysis of the problem is carried out, and a way of its linearization is indicated. Calculations of isotropic and metal composite plates subjected to the transverse or transverse-longitudinal bending showed that their bearing capacity in the elastoplastic bending is a number of times (occasionally, by an order of magnitude) greater than in the elastic bending. The heating of the plates sharply decreases their resistance to the bending in the case of elasticity and affects it only slightly in the case of elastoplasticity. In the elastoplastic bending, the bearing capacity of the metal composite plate a number of times exceeds that of isotropic plates made of conventional structural metal alloys. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 6, pp. 715–742, November–December, 2005.     

On the Rate of Approximation of Closed Jordan Curves by Lemniscates

As proved by Hilbert, it is, in principle, possible to construct an arbitrarily close approximation in the Hausdorff metric to an arbitrary closed Jordan curve Γ in the complex plane {z} by lemniscates generated by polynomials P(z). In the present paper, we obtain quantitative upper bounds for the least deviations H _n (Γ) (in this metric) from the curve Γ of the lemniscates generated by polynomials of a given degree n in terms of the moduli of continuity of the conformal mapping of the exterior of Γ onto the exterior of the unit circle, of the mapping inverse to it, and of the Green function with a pole at infinity for the exterior of Γ. For the case in which the curve Γ is analytic, we prove that H _n (Γ) = O(q _n ), 0 ≤ q = q(Γ) < 1, n → ∞.__________Translated from Matematicheskie Zametki, vol. 77, no. 6, 2005, pp. 861–876.Original Russian Text Copyright ©2005 by O. N. Kosukhin.     

Optimal dynamic bandwidth allocation for complex networks

Traffic capacity of one network strongly depends on the link’s bandwidth allocation strategy. In previous bandwidth allocation mechanisms, once one link’s bandwidth is allocated, it will be fixed throughout the overall traffic transmission process. However, the traffic load of every link changes from time to time. In this paper, with finite total bandwidth resource of the network, we propose to dynamically allocate the total bandwidth resource in which each link’s bandwidth is proportional to the queue length of the output buffer of the link per time step. With plenty of data packets in the network, the traffic handling ability of all links of the network achieves full utilization. The theoretical analysis and the extensive simulation results on complex networks are consistent. This work is valuable for network service providers to improve network performance or to do reasonable network design efficiently.     

一类时变非线性系统的一致有界性的注记

主要研究带干扰的广义齐次系统的一致有界和一致最终有界性 ,证明了当干扰项满足一致有界及Lp 可积时系统的一致有界性及一致最终有界性 ,本质推广了最近相关文献中的有关系统一致有界性的结果 .     

石墨弹性波速与热力学函数的理论计算

在全电子水平上,基于广义梯度近似(GGA)的密度泛函理论和全势能线性缀加平面波方法(FLAPW)计算了石墨的晶体参数和弹性波速;在德拜模型的基础上,利用弹性波速方法和原子位移方法分别计算了石墨的德拜频率;采用统计物理方法计算了石墨在标准条件下(298.5 k,1 atm)的热容,熵,升华焓等热力学函数,并与实验值进行了比较.     

Hybrid of chitin and humic acid as high performance sorbent for Ni(II)

Hybrid of humic acid (HA) and chitin has been synthesized and the hybrid material (chitin-HA) was then applied as sorbent to adsorb Ni(II). The HA was extracted from peat soil of Gambut District, South Kalimantan, Indonesia, according to the procedure recommended by IHSS (International Humic Substances Society). The chitin was isolated from crab shell waste of sea food restaurants through deproteination using NaOH 3.5% (w/v) and followed by removal of inorganic impurities using HCl 1 M. The synthesis of chitin-HA was performed by reacting gelatinous chitin solution in HCl 0.5 M and HA solution in NaOH 0.5 M. Parameters investigated in this work consists of effect of medium acidity on the sorption, sorption rate (k_s) and desorption rate (k_d) constants, Langmuir (monolayer) and Freundlich (multilayer) sorption capacities, and energy (E) of sorption. The k_s and k_d were determined according to a kinetic model of first order sorption reaching equilibrium, monolayer sorption capacity (b) and energy (E) were determined according to the Langmuir isotherm model, and multilayer sorption capacity (B) was determined based on the Freundlich isotherm model.Sorption of Ni(II) on both chitin and chitin-HA was maximum at pH 8.0. The kinetic expression resulted from the proposed kinetic model has been shown to be more applicable than the commonly known Lagergren equation obtained from the pseudo-first order sorption model. The application of the proposed model revealed that the presence of HA increased the k_s from 0.018 min⁻¹ for chitin to 0.031 min⁻¹ for chitin-HA. As for k_s, the value of b was also bigger in the presence of HA, i.e. 7.42 × 10⁻⁵ mol/g for chitin and 9.93 × 10⁻⁵ mol/g for the chitin-HA. Unlike k_s and b, the value of E slightly decreased from 23.23 to 21.51 kJ/mol for the absence and presence of HA, respectively. It can also be deduced that the presence of HA on chitin contributed more to the additional layer of Ni(II) sorbed on sorbent. Without HA, B for chitin was only 6.17 times higher than b, while with the presence of HA, the enhancement of the sorption capacity from the multilayer (B) to the monolayer (b) was 19.40. The increase of k_s, b, B, and the decrease of E would be very benefit in the real application of chitin-HA for the recovery of Ni(II) from aqueous samples.