横向射流式单重态氧发生器的性能实验研究

 对氧碘化学激光器的单重态氧发生器（SOG）进行了改进，采用横向射流方式，并对该横向射流式单重态氧发生器的性能进行了检测。实验中过氧化氢碱溶液温度控制在－16℃左右,氯气流量为530mmol/s，He与氯气的流量比为3;采用PS法测量单重态氧分子的产率,吸收法测量氯气的利用率和相对水含量。得出如下结论:在不使用冷阱和分离器的情况下，最高单重态氧分子产率达到58%, 氯气利用率在80%以上,相对水含量小于等于0.5;气体达到最大流量时,发生器仍然能稳定地工作。     

HL-1M边缘等离子体静电湍流扰动

对HL－1M边缘等离子体静电湍流扰动进行了初步的实验研究。获得了扰动的基本特征量，估计了低杂波引起的径向粒子流的变化。在加低杂波（2．45GHz)前、后，电子密度扰动和极向电场扰动的幅度及其关联性变化不大。虽然低杂波部分抑制了静电湍流，但在数量上不能解释粒子约束改善的实验结果。     

e-A深度非弹性散射中胶子辐射振幅的新计算方法

在e-A深度非弹性散射过程中, 喷注穿过冷核介质时, 多重散射诱导胶子辐射会导致对碎裂函数的修正及喷注的能量损失.前期研究中关于计算e-A深度非弹性散射中胶子辐射振幅的两种方法: 螺旋振幅近似和微扰QCD严格计算都异常繁杂. 本文发展了一种新的方法, 可以方便计算出多重散射导致胶子辐射的振幅, 得到的碎裂函数的修正以及能量损失与严格计算的结果一致.     

聚能射流的断裂时间

从描述聚能射流失稳的一维近似方程出发，导出了聚能射流断裂时间的近似公式。这个近似公式定量显示了屈服应力、本构关系、粘度和径向收缩效应等对射流断裂时间的影响，在４个不同的特殊近似下，可以自然演化为近１０年来所发表的几个半经验解析公式，并且在合理的参数范围内，公式给出的断裂时间曲线覆盖了射流断裂时间的全部实验点。     

Differential equations uniquely determined by algebras of point symmetries

We continue to investigate strongly and weakly Lie remarkable equations, which we defined in a recent paper. We consider some relevant algebras of vector fields on ℝ^k (such as the isometric, affine, projective, or conformal algebras) and characterize strongly Lie remarkable equations admitted by the considered Lie algebras. __________ Translated from Teoreticheskaya i Matematicheskaya Fizika, Vol. 151, No. 3, pp. 486–494, June, 2007.     

Large-eddy-simulation of 3-dimensional Rayleigh-Taylor instability in incompressible fluids

The 3-dimensional incompressible Rayleigh-Taylor instability is numerically studied through the large-eddy-simulation ( LES) approach based on the passive scalar transport model. Both the instantaneous velocity and the passive scalar fields excited by sinusoidal perturbation and random perturbation are simulated. A full treatment of the whole evolution process of the instability is addressed. To verify the reliability of the LES code, the averaged turbulent energy as well as the flux of passive scalar are calculated at both the resolved scale and the subgrid scale. Our results show good agreement with the experimental and other numerical work. The LES method has proved to be an effective approach to the Rayleigh-Taylor instability.     

Feasibility Exploration of Laser‐based Techniques for Characterization of a Flashing Jet

Two‐phase flows hold an interest in many areas of science and engineering. In the safety field, one such topic is the accidental release of flammable and toxic pressure‐liquefied gases. In case of such a release, a flashing vapor explosion takes place resulting in a very dense two‐phase cloud. If the released substance is flammable, this cloud can be combustible and can lead to deflagration or detonation. For understanding the source processes of flashing and risk assessment, data related to cloud characteristics (i.e. droplet size, velocity etc.) is needed especially in the near region of the release. Due to the non‐equilibrium nature of the near field regions accurate data measurement is not possible with intrusive techniques. Therefore, laser‐based optical techniques (like Particle Image Velocimetry (PIV), Particle Tracking Velocimetry and Sizing (PTVS), Phase Doppler Anemometry (PDA) etc.) present the only possibility to obtain information for particle diameter and velocity evolution in this harsh environment.     

Inviscid,laminar and turbulent opposed flows

This paper attempts to reproduce numerically previous experimental findings with opposed flows and extends their range to quantify the effects of upstream pipes and nozzles with inviscid, laminar and turbulent flows. The choice of conservation equations, boundary conditions, algorithms for their solution, the degree of grid dependence, numerical diffusion and the validity of numerical approximations are justified with supporting calculations where necessary. The results of all calculations on the stagnation plane show maximum strain rates close to the annular exit from the nozzles and pipes for lower separations and it can be expected that corresponding reacting flows will tend to extinguish in this region with the extinction moving towards the axis. With laminar flows, the maximum strain rate increased with Reynolds number and the maximum values were generally greater than with inviscid flows and smaller than with turbulent flows. With large separations, the strain rates varied less and this explains some results with reacting flows where the extinction appeared to begin on the axis. The turbulent‐flow calculations allowed comparison of three common variants of a two‐equation first‐moment closure. They provided reasonable and useful indications of strain rates but none correctly represented the rms of velocity fluctuations on the axis and close to the stagnation plane. As expected, those designed to deal with this problem produced results in better agreement with experiment but were still imperfect. Copyright © 2004 John Wiley & Sons, Ltd.     

Production of superfine fibers by the electrospinning method

Weakly conducting fluid flows in an electric field in the presence of phase interfaces are investigated theoretically and experimentally. The object of the investigation is an axisymmetric jet. The analysis is carried out within the framework of electrohydrodynamics (EHD) with allowance for surface charge transfer on mobile interfaces. The jet shape is calculated at large distances from the outflow point. The theoretical and experimental data are compared for Newtonian and polymeric fluids.     

湍流燃烧二阶矩模型的大涡模拟验证

对美国Sandia国家实验室测量的甲烷-空气湍流射流火焰进行了三维大涡模拟(LES),其统计的时均量以及脉动量符合实验测量值,且和RANS代数二阶矩湍流燃烧模型模拟结果大致符合。LES统计得到的化学反应率系数脉动和甲烷浓度脉动的互关联与对应的时均量梯度的乘积分布趋势相同,大小幅值的位置也相对应,与二阶矩湍流燃烧模型的封闭假设相符,验证了二阶矩代数燃烧模型的合理性。