髋臼四方区解剖型自锁定钢板的数字技术设计

为探讨使用数字技术设计新型髋臼四方区自锁定解剖型钢板, 采集宁波市第六医院影像科2020年1月至2020年12月, 25~50岁正常男女骨盆CT数据, 选择中位数的骨盆CT作为模型. 将CT数据依次导入Mimics 21.0软件和Unigraphics NX软件, 生成三维骨盆模型. 用CAD软件画出钢板螺钉dwg格式二维图像后导入Unigraphics NX软件, 建立stl格式钢板螺钉三维模型, 设计钢板厚2.0~3.0mm, 实心皮质骨螺钉Ф3.5/5.5mm. 在三维空间视图中, 将钢板螺钉装配到骨盆模型, 重点观察三维透视图、钉道纵轴切面图、螺钉与钢板的锁定角度, 校对功能固定区、定位孔、阻挡孔、固定孔、应力桥、滑动槽等指标, 优化钢板形态和螺钉钉道, 一块钢板同时固定髋臼四方区、臼顶负重区、前后柱、前后壁. stl格式数据输出至打印机, 3D打印钢板, 装配到骨盆模型, 校对钢板与骨盆的匹配度, 确定最优化的图像数据. 根据患者骨盆CT导出的数据, 用Unigraphics NX软件建立三维骨盆模型, 可灵活设计钢板螺钉, 精度达到0.2mm, 即刻修改钢板螺钉形态数据, 虚拟内固定. 数字技术设计不再需要手工标本测量和CT图像测量, 可提高新型内固定装置的设计效率, 为个性化骨科内植物设计、精准固定手术提供了新路径.     

介绍几种测定波片位相差的方法

本文提出测量彼片位相差的几种方法，并从原理上作了相应的说明．     

Position magnifying sensor

This paper describes the application of multiple beam shearing interferometry to a position magnifying sensor. A multiple beam shearing interferometer (MBSI) with a shear plate wedged in the vertical direction produces sharp multiple beam fringes. When the lateral displacement of a point source (which gives rise to the input beam of the MBSI) or its image occurs in the horizontal direction, these fringes move vertically in a magnified manner. This characteristic was used in a position magnifying sensor to detect the displacement of a point image. The advantages of the sensor include a large displacement magnification (more than a hundred times) and a large working distance.     

核－核碰撞的独立源模型及中心快度区末态产生粒子横能量分布

将强子－核碰撞的独立源模型推广到核－核碰撞，给出了核－核碰撞末态产生粒子横能量分布方程，将其与ＣＥＲＮ的ＮＡ３５合作组得到的实验数据相比较，模型较好地解释了实验结果．     

微通道板X射线探测器

在激光等离子体实验研究中,为了更好地了解激光与等离子体相互作用过程中所发生的物理过程,要求能够高时间分辨地观测等离子体所辐射的X射线的特征。测量的关键在于X射线探测元件,既要有快的时间响应,又要能够输出足够大的光电流,以便直接驱动高速示波器,进行显示和照像。普通的闪烁体/光电倍增管X射线探测器,由于闪烁体荧光有着固有的衰减时间,以及普通的光电倍增管中的电子飞行时间离散严重,时间分辨力难以提高。     

Boundary integral equations for bending of thermoelastic plates with transmission boundary conditions

The solution of an initial‐boundary value problem for bending of a piecewise‐homogeneous thermoelastic plate with transverse shear deformation is represented as various combinations of single‐layer and double‐layer time‐dependent potentials. The unique solvability of the boundary integral equations generated by these representations is proved in spaces of distributions. Copyright © 2009 John Wiley & Sons, Ltd.     

环形腔中激光振荡输出的横向斑图及向光学湍流的转变

在研究环形腔中激光振荡输出的分岔与混沌的基础上,采用耦合映象格子模型研究了其空间扩展系统的横向效应.数值模拟表明,随着参数的改变,空间扩展系统由均匀稳态、行波解向时空混沌演化.在一定的参数条件下,空间扩展系统从光场取入射平面波(均匀分布)开始,经对称破缺向光学湍流转变. 关键词： 横向斑图 时空混沌 湍流 数值模拟     

高阶剪切变形板理论K■rm■n型方程及在热后屈曲分析中的应用

本文基于Reddy高阶剪切变形板理论导出Karman型非线性大挠度方程并用于层合板热后屈曲分析．分析中计及板初始几何缺陷和热效应．给出了四边简支．对称正交铺设层合板在均匀或非均匀抛物型热分布作用下的后屈曲分析．采用摄动-Galerkin混合法确定板的热屈曲载荷与热后屈曲平衡路径．同时讨论了横向剪切变形，板长宽比，铺层数以及初始几何缺陷等各种参数变化的影响．     

Computation of collective modes and acoustic investigations at different temperatures of vitrous silica

This paper is mainly concerned with elastic and acoustic properties of vitrous silica besides the computation of phonon frequencies. Thus the phonon frequencies of vitrous silica have been calculated assuming the electronic bulk modulus,K _e, as equal to zero. New equations have been derived to relate the pressure derivatives of second order elastic constants to the acoustic Gruneisen’s parameters using both Bhatia-Singh’s parameters and Schofield’s equations. The calculated longitudinal and transverse Gruneisen’s parameters and the predicted absorption band spectra from Nagendranath’s equation and Bhatia Singh’s parameters are in good agreement with experiment. The calculated mean acoustic mode Gruneisen’s parameter evaluated from the pressure derivative of Nagendranath’s equation is also in good agreement with experiment. An erratum to this article is available at .     

圆薄板非对称大变形弯曲问题

本文首先导出圆薄板非轴对称大变形问题的位移基本方程及边界条件.利用变换和摄动法将非线性位移方程线性化,得到了近似边值问题.作为算例,文中研究了圆薄板在较复杂载荷作用下的非线性弯曲问题.