Theoretical investigation of electron transfer transition in tetracyanoethylene-contained organic complexes

In this work, the authors use complete active space self-consistent field method to investigate the photoinduced charge-separated states and the electron transfer transition in complexes ethylene-tetracyanoethylene and tetramethylethylene-tetracyanoethylene. Geometries of isolated tetracyanoethylene, ethylene, and tetramethylethylene have been optimized. The ground state and the low-lying excited states of ethylene and tetracyanoethylene have been optimized. The state energies in the gas phase have been obtained and compared with the experimentally observed values. The torsion barrier of tetracyanoethylene has been investigated through the state energy calculation at different conformations. Attention has been particularly paid to the charge-separated states and the electron transfer transition of complexes. The stacked conformations of the donor-acceptor complexes have been chosen for the optimization of the ground and low-lying excited states. Equilibrium solvation has been considered by means of conductor-like screening model both in water and in dichloromethane. It has been found that the donor and tetracyanoethylene remain neutral in complexes in ground state (1)A(1) and in lowest triplet state (3)B(1), but charge separation appears in excited singlet state (1)B(1). Through the correction of nonequilibrium solvation energy based on the spherical cavity approximation, pi-->pi* electron transfer transition energies have been obtained. Compared with the experimental measurements in dichloromethane, the theoretical results in the same solvent are found higher by about 0.5 eV.     

Synthesis and characterization of novel poly(vinyl chloride)‐based grafts: Poly(vinyl chloride‐co‐2‐chloropropene) fitted with multiple high‐glass‐transition‐temperature polyolefin branches

The tertiary chlorine (Cl^t) content of vinyl chloride/2‐chloropropene copolymers [P(VC‐co‐2CP)] was determined by NMR spectroscopy. Copolymers containing 6.8–47.0 Cl^t's per P(VC‐co‐2CP) chain were used to initiate the cationic grafting of α‐methylstyrene, norbornadiene, indene, and norbornene with Et₂AlCl under various conditions. Grafting was demonstrated by selective solvent extraction, and the effect of the experimental conditions on the grafting efficiency was examined. Select rheological and thermal characteristics of P(VC‐co‐2CP) grafts, including the glass‐transition temperature, heat deflection temperature, and discoloration upon heating, were studied. P(VC‐co‐2CP) carrying 7–11 poly(α‐methylstyrene) or polynorbornadiene branches per chain raised the glass‐transition temperature to, or above, that of a blend control. P(VC‐co‐2CP)s fitted with polyindene or polynorbornene branches were less effective in raising the mechanical properties. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3644–3651, 2002     

Characterization of phase transition of Ba2-xSrxIn2O5 by thermal analysis and high temperature X-ray diffraction

The phase transitions of Ba_2-xSr_xIn₂O₅ were investigated with various thermal analyses and high-temperature X-ray diffraction. It was clarified that crystal structure of Ba_2-xSr_xIn₂O₅ with x=0.0~0.4 varies from brownmillerite through distorted perovskite to another distorted perovskite with increase of temperature. The phase transition from brownmillerite to distorted perovskite was revealed to be first order, whereas transition from distorted perovskite to another one was second order. The specimen with x≥0.5 showed only one first order phase transition from brownmillerite to distorted perovskite. The phase diagram of Ba_2-xSr_xIn₂O₅ was established and existence of tricritical point at ~1100°C with x=0.4~0.5 was suggested. This revised version was published online in August 2006 with corrections to the Cover Date.     

Single‐armed salamo‐like dioxime and its multinuclear Cu (II), Zn (II) and Cd (II) complexes: Syntheses,structural characterizations,Hirshfeld analyses and fluorescence properties

Three multinuclear Cu (II), Zn (II) and Cd (II) complexes, [Cu₂(L)(μ‐OAc)]·CHCl₂ ( 1 ), [Zn₂(L)(μ‐OAc)(H₂O)]·3CHCl₃ ( 2 ) and [{Cd₂(L)(OAc)(CH₃CH₂OH)}₂]·2CH₃CH₂OH ( 3 ) with a single‐armed salamo‐like dioxime ligand H₃L have been synthesized, and characterized by FT‐IR, UV–vis, X‐ray crystallography and Hirshfeld surfaces analyses. The ligand H₃L has a linear structure and C‐H···π interactions between the two molecules. The complex 1 is a dinuclear Cu (II) complex, Cu1 and Cu2 are all five‐coordinate possessing distorted square pyramidal geometries. The complex 2 also forms a dinuclear Zn (II) structure, and Zn1 and Zn2 are all five‐coordinate bearing distorted trigonal bipyramidal geometries. The complex 3 is a symmetrical tetranuclear Cd (II) complex, and Cd1 is a hexa‐coordinate having octahedral configuration and Cd2 is hepta‐coordinate with a pentagonal bipyramidal geometry, and it has π···π interactions inside the molecule. In addition, fluorescence properties of the ligand and its complexes 1 – 3 have also been discussed.     

Monitoring dendrimer conformational transition using 19F and 1H2O NMR

The conformational transition of a fluorinated amphiphilic dendrimer is monitored by the ¹H signal from water, alongside the ¹⁹F signal from the dendrimer. High-field NMR data (chemical shift δ, self-diffusion coefficient D, longitudinal relaxation rate R₁, and transverse relaxation rate R₂) for both dendrimer (¹⁹F) and water (¹H) match each other in detecting the conformational transition. Among all parameters for both nuclei, the water proton transverse-relaxation rate R₂(¹H₂O) displays the highest relative scale of change upon conformational transition of the dendrimer. Hydrogen/deuterium-exchange mass spectrometry reveals that the compact form of the dendrimer has slower proton exchange with water than the extended form. This result suggests that the sensitivity of R₂(¹H₂O) toward dendrimer conformation originates, at least partially, from the difference in proton exchange efficiency between different dendrimer conformations. Finally, we also demonstrated that this conformational transition could be conveniently monitored using a low-field benchtop NMR spectrometer via R₂(¹H₂O). The ¹H₂O signal thus offers a simple way to monitor structural changes of macromolecules using benchtop time-domain NMR.     

磁性高分子链的磁性质和构象性质的Monte Carlo模拟

采用退火 (Annealing)MonteCarlo方法 ,从高温到低温顺序模拟了简立方格点上考虑最近邻Ising相互作用的磁性高分子链在不同温度的磁性质和构象性质 .磁性高分子链在低温下存在自发磁矩 ,无限长链的临界温度Tc=1 77± 0 0 5J kB.在临界温度附近 ,高分子链经历了从伸展的无规线团到紧缩球体的塌缩相变 .对链的尺寸、形状、近邻数及能量的分析表明 ,高分子链的构象性质从温度Tc=1 77开始发生较明显的变化 ,这表明高分子Ising链的相变是Ising相互作用和链节运动协同作用的结果 .     

Transition state geometry in radical abstraction reactions: comparison of interatomic distances in the intersecting parabolas and Morse curves models with quantum-chemical calculations

Interatomic distances in the transition state were estimated for the reactions of radical abstraction: H^· + H₂, H^· + HCl, H^· + CH₄, N^·H₂ + NH₃, HO^· + H₂O, HO₂ ^· + HOOH, and C^·H₃ + SiH₄. The calculation was performed by the quantum-chemical density functional method or coupled clusters method (QCH), as well as by the methods of intersecting parabolas (IPM) and Morse curves (IMM), using experimental data (activation energies and reaction enthalpies). The results of the latter two methods are close to the quantum-chemical calculation and differ only by the increment a: r(IPM or IMM) = a + r(QCH), where a = –4.5·10^–12 m for IPM and a = +1.9·10^–12 m for IMM.     

Catalytic Hydrosilylation of Furan, Thiophene, and Pyridine Aldimines

The addition of hydrosilanes (HSiEt₃, HSiMe₂Ph, H₂SiPh₂) to the CH=N bond of heterocyclic azomethines has been studied in the presence of monovalent complexes of rhodium and palladium. The effect on the reaction of the CF₃ group of the aldimines, which were obtained from O-, S-, and N-heteroaromatic aldehydes and 2-trifluoromethylaniline, has been clarified, as were other regularities of the processes being studied. A series of corresponding furans, thiophenes, and pyridine amines has been synthesized.     

Effect of Oxygen Redistribution on the Normal and Superconducting Properties of Yttrium High‐Temperature Superconductors

An anomaly is found in the vicinity of T_max 560$ K on electric resistance versus temperature curves for yttrium hightemperature superconductors of the 123 phase. Xray phase analysis suggests a structural phase transition in the vicinity of T_max due to oxygen redistribution in the mobile sublattice of this compound. Investigation of samples with Y partially replaced by Ca has shown that the structural phase transition does not depend on carrier concentration in the conduction band.