Design strategies for controlling the molecular weight and rate using reversible addition–fragmentation chain transfer mediated living radical polymerization

Living radical polymerization has allowed complex polymer architectures to be synthesized in bulk, solution, and water. The most versatile of these techniques is reversible addition–fragmentation chain transfer (RAFT), which allows a wide range of functional and nonfunctional polymers to be made with predictable molecular weight distributions (MWDs), ranging from very narrow to quite broad. The great complexity of the RAFT mechanism and how the kinetic parameters affect the rate of polymerization and MWD are not obvious. Therefore, the aim of this article is to provide useful insights into the important kinetic parameters that control the rate of polymerization and the evolution of the MWD with conversion. We discuss how a change in the chain‐transfer constant can affect the evolution of the MWD. It is shown how we can, in principle, use only one RAFT agent to obtain a polymer with any MWD. Retardation and inhibition are discussed in terms of (1) the leaving R group reactivity and (2) the intermediate radical termination model versus the slow fragmentation model. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3189–3204, 2005     

Tight‐binding molecular dynamics simulation of Si?H bond dissociation in silicon clusters

New model of Si? H bond dissociation is proposed and tested in the cluster Si₁₀H₁₆ by the simulation approach that combines classic molecular dynamics method and the self‐consistent tight‐binding electronic and total energy calculation one. It is shown that the monohydride Si? H bond is unstable with respect to silicon dangling bond and bend‐bridge Si? H? Si bond formation when this cluster traps the single positive charge and that hydrogen migrates through a path involving rather rotation around the Si? Si bond than the center of this bond (the bond‐centered position). These results can be useful for understanding hydrogen‐related phenomena at surfaces, interfaces, and internal voids of various hydrogenated silicon systems: electronic devices, silicon solar cells, and nanocrystalline and porous silicon. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 93: 351–359, 2003     

Kinetics and equilibrium of multicomponent adsorption on chiraly templated surfaces

In this contribution we propose a simple model of adsorption of a binary (racemic) mixture on a chiraly templated surface. As an example, the adsorption of a liquid mixture of enantiomers on a chiral stationary phase (CSP) is considered. In particular, we study the effect of the lateral interactions in the adsorbed phase on the kinetic and equilibrium isotherms of the enantiomers. Additionally, we investigate the influence of the composition of the surface on the performance of the CSP in the presence of the lateral interactions. To that end, the adsorption of the mixture is modeled by using Monte Carlo simulations as well as by applying an analytical approach involving rate equations coupled with the Mean Field Approximation (MFA). The predictions of the theory are found to be in good agreement with the results of the simulations.     

Two-photon Dissociation Study of Carbon Disulfide in Acetonitrile at 266 nm

Using laser flash photolysis/transient absorption technique for the study of two photon photodissociation of carbon disulfide in acetonitrile solution at 266 nm, the transient UV-Vis absorption spectrum of Rydberg state CS2 （6sσg） within 240-370 nm and subsequent dissociation product CS （α^3П） with the maximum absorption at 260 nm were directly observed. The lifetime of CS （α^3П） in the nitrogen and oxygen saturated solution is also studied in our experiment.     

Size and pH effect on electrical and conformational behavior of poly(acrylic acid): Simulation and experiment

Monte Carlo simulations, experimental titrations and fluorescence correlation spectroscopy experiments were used to investigate the conformational and electrical properties of polyacrylic acids (PAA). On the one hand, titration curves were calculated to get an insight into the role of pH on the degree of ionization and conformation of PAA chains. On the other hand, experimental potentiometric titrations of PAA were also achieved for different PAA molecular weights and compared to the calculated titration curves obtained by Monte Carlo coarse grained simulations. It was found that for a large range at intermediate PAA ionizations, a good correlation is obtained between experimental and simulations data thanks to the prominence of electrostatic interactions in this domain. The effect of ionic concentration and PAA molecular weight on the titration curves was also investigated. In order to get a better understanding of PAA conformational behavior, we also investigated PAA diffusion properties in aqueous solutions as a function of pH and ionic strength by fluorescence correlation spectroscopy (FCS), thanks to its high sensitivity to measure diffusion coefficients of tracer solutes. Good qualitative agreements were observed between experimental diffusivities and polymer properties calculated from MC simulations. It was shown that the high molecular weight PAA chains display more significant changes in diffusivity in agreement with the ionization degrees and conformational changes observed in the simulations.     

Simulations of the active transport of a neutral solute based on a kinase-channel-phosphatase topology

Simulations of coupled interactions involving two opposite enzymatic reactions, solute diffusions, and electrostatic interactions between membrane charges and charged solutes were conducted under a fixed kinase-channel-phosphatase (KCP) topology oriented from the outside to the inside of a porous membrane structure. Depending on the kinase and phosphatase locations, we recently demonstrated that an active transport of a phosphorylated substrate may occur via the opposite topology, that is, a PCK topology. The present analysis demonstrates that, under a KCP membrane topology, which also behaves as a specific ATP-dependent transporter, the active transport of a neutral substrate may occur. This analogous active transport appears to be dependent on the phosphatase location and on the membrane surface potentials. A broad analysis of the role played by the main parameters taken into account in the model was conducted in order to define precisely the physico-chemical conditions and the membrane topology needed for the highest active transports within the shortest time.     

Monte carlo calculations of the conformal charge

The conformal charge is an important quantity which characterizes the nature of the two-dimensional phase transition. We report a first attempt to use a new numerical method to calculate the conformal charge. In this paper, we apply our method to the 2-dimensional, ⁴, continuous-spin Ising model. By varying the parameters in the Hamiltonian, one can change continuously from the known Gaussian limit to the Ising limit. It is well known that the critical points for these two systems are not in the same universality class. We study this behavior for the Gaussian model, the single-well ⁴ model, the border model, and the double-well ⁴ model for a large lattice. Our results, while giving a good general picture, are not so far sufficient to differentiate whether the non-Gaussian cases studied belong to the Ising model universality class or not. Further studies of other lattice sizes should serve to improve greatly our conclusions.     

Phenomenology of nonlocal cellular automata

Dynamical systems with nonlocal connections have potential applications to economic and biological systems. This paper studies the dynamics of nonlocal cellular automata. In particular, all two-state, three-input nonlocal cellular automata are classified according to the dynamical behavior starting from random initial configurations and random wirings, although it is observed that sometimes a rule can have different dynamical behaviors with different wirings. The nonlocal cellular automata rule space is studied using a mean-field parametrization which is ideal for the situation of random wiring. Nonlocal cellular automata can be considered as computers carrying out computation at the level of each component. Their computational abilities are studied from the point of view of whether they contain many basic logical gates. In particular, I ask the question of whether a three-input cellular automaton rule contains the three fundamental logical gates: two-input rules AND and OR, and one-input rule NOT. A particularly interesting edge-of-chaos nonlocal cellular automaton, the rule 184, is studied in detail. It is a system of coupled selectors or multiplexers. It is also part of the Fredkin's gate—a proposed fundamental gate for conservative computations. This rule exhibits irregular fluctuations of density, large coherent structures, and long transient times.     

Structure and dynamics of liquid water with different long-range interaction truncation and temperature control methods in molecular dynamics simulations

We have used molecular dynamics simulations to study the physical properties of modified TIP3P water model included in the CHARMM program, using four different methods-the Ewald summation technique, and three different spherical truncation methods-for the treatment of the long-range interactions. Both the structure and dynamics of the liquid water model were affected by the methods used to truncate the long-range interactions. For some of the methods artificial structuring of the model liquid was observed around the cutoff radius. The model liquid properties were also affected by the commonly applied temperature control methods. Four different methods for controlling the temperature of the system were studied, and the effects of these methods on the bulk properties for liquid water were analyzed. The system size was also found to change the dynamics of the model liquid water. Two control simulations with the SPC/E water model were carried out. The self-diffusion coefficient (D), the radial distribution function (g(OO)), the distance dependent Kirkwood G-factor [G(k)(r)] and the intermolecular potential energy (E(pot)) were determined from the different trajectories and compared with the experimental data.     

On the influence of nuclear fluctuations on calculated NMR shieldings of benzene and ethylene: a Feynman path integral–ab initio investigation*

The absolute magnetic shieldings of benzene and ethylene have been theoretically studied under the conditions of thermal equilibrium, i.e., under explicit consideration of the nuclear degrees of freedom. For this purpose we have combined the Feynman path integral quantum Monte Carlo (PIMC) formalism with the gauge‐including atomic orbital (GIAO) approach in the Hartree–Fock (HF) approximation. The HF operator has been employed to derive the NMR parameters of the two hydrocarbons via an ensemble averaging over large sets of molecular configurations that are populated in thermal equilibrium. The nuclear fluctuations are responsible for a deshielding of the nuclei relative to the shieldings at the vibrationless minimum of the potential energy surface (PES). The influence of the nuclear degrees of freedom is largest for the isotropic part of the ¹³C shielding tensor. The theoretical results can be explained on the basis of simple geometrical considerations. The bond lengths in thermal equilibrium are larger than the bond lengths at the minimum of the PES. This length enhancement is the prerequisite for a deshielding of the nuclei in thermal equilibrium. The vibrational corrections of the nuclear magnetic resonance (NMR) parameters of benzene and ethylene are quantum driven; classical thermal degrees of freedom of the nuclei are of minor importance. Conceptual problems of theoretical studies of NMR parameters on the basis of a single molecular geometry are emphasized. The influence of the spatial uncertainty of the nuclei becomes decisive in molecules with light atoms. It is pointed out that the combination of the PIMC formalism with electronic Hamiltonians of state‐of‐the‐art quality renders possible accurate determinations of NMR parameters. © 2002 John Wiley & Sons, Inc. Int J Quantum Chem 86: 280–296, 2002