Evaluation of glued-diaphragm fibre optic pressure sensors in a shock tube

Glued-diaphragm fibre optic pressure sensors that utilize standard telecommunications components which are based on Fabry–Perot interferometry are appealing in a number of respects. Principally, they have high spatial and temporal resolution and are low in cost. These features potentially make them well suited to operation in extreme environments produced in short-duration high-enthalpy wind tunnel facilities where spatial and temporal resolution are essential, but attrition rates for sensors are typically very high. The sensors we consider utilize a zirconia ferrule substrate and a thin copper foil which are bonded together using an adhesive. The sensors show a fast response and can measure fluctuations with a frequency up to 250 kHz. The sensors also have a high spatial resolution on the order of 0.1 mm. However, with the interrogation and calibration processes adopted in this work, apparent errors of up to 30% of the maximum pressure have been observed. Such errors are primarily caused by mechanical hysteresis and adhesive viscoelasticity. If a dynamic calibration is adopted, the maximum measurement error can be limited to about 10% of the maximum pressure. However, a better approach is to eliminate the adhesive from the construction process or design the diaphragm and substrate in a way that does not require the adhesive to carry a significant fraction of the mechanical loading.      

Cavitation field from a horn—A new model

The cavitation field from a horn-type transducer is experimentally probed by the optical method.Based on these observations,we propose a model of the field which hypothesizes that most violent caviation bubbles originate from the vibrating surface and there-from fast drift to the near liquid region.These bubbles are chiefly responsible for the practical applications of cavitation for a large power input to the transducer.During migration they become weakened.Cavitation bubbles are also produced in the liqui...     

从换能器技术的变化看声波测井技术的发展

无论是在电缆测井还是在随钻测井方面,声波换能器结构和振动模式的变化导致了声波测井技术的进步和重大演化.文章以声波测井换能器技术的变化为主线,分析了声波测井技术的发展和进步以及我国在该技术领域取得的进步.单极子声波测井技术已经成为我国成熟的声波测井技术,包括非对称声源技术在内的多极子声波测井技术是我国刚刚攻克的先进声波测井技术并已经进入产业化进程,以井下声波的定向辐射和定向接收为最主要特征的相控声波测井技术是正在研发的新一代声波测井技术,我国在此领域也已经取得显著突破.     

基于二维声子晶体的大尺寸夹心式换能器的优化设计

夹心式换能器应用极为广泛,但当其横向尺寸过大时,存在耦合振动,影响其辐射面的位移分布.本文通过在大尺寸夹心式换能器的前盖板中加工周期排列的槽,来形成一种二维声子晶体结构.随后,采用有限元法对基于二维声子晶体的大尺寸夹心式换能器的振动传输特性、共振频率以及发射电压响应进行仿真模拟,讨论了开槽高度和开槽宽度对其带隙、共振与反共振频率、带宽以及辐射面位移分布的影响.研究结果表明,通过在大尺寸夹心式换能器中应用声子晶体结构可对其进行优化设计.当大尺寸夹心式换能器的工作频率位于其带隙范围内时,二维声子晶体结构能有效地抑制其横向振动,从而改善换能器辐射面位移分布的均匀程度.此外,在大尺寸夹心式换能器的前盖板中加工二维声子晶体结构,能有效提升换能器的带宽,进而拓宽大尺寸夹心式换能器的工作频带.     

被测体材质对电涡流位移传感器特性的影响

本文通过对电涡流传感器的位移特性实验分析不同被测体材料对于传感器输出特性的影响     

压电矢量传感器的低噪声设计

针对压电矢量传感器的低噪声设计问题,建立了基于压电敏感器件、悬挂结构、前置放大电路及电缆的同振式矢量传感器等效自噪声分析模型;结合敏感器件的低噪声设计、悬挂结构对自噪声的影响以及前置放大电路低噪声匹配等内容提出了一种低噪声设计方法。设计了低噪声矢量传感器样机,研制了自噪声测量平台并对样机进行了测试。结果表明:样机的等效噪声声压谱级达到了55.5 dB/√Hz2@200 Hz,低于同频率Knudsen零级海况下海洋环境噪声;测试结果与设计结果相符,验证了低噪声设计方法的有效性,也为压电矢量传感器的低噪声设计提供了理论依据。     

基于换能器阵的三维多粒子悬浮及操控装置

针对目前三维声操作技术悬浮粒子数量少、悬浮空间局限的问题,本文提出了一种由三对相对换能器阵列组成的声悬浮装置的设计方案,通过改变换能器阵列的相位差,成功实现了粒子的三维操纵.该装置可用于测量声速,相对误差一般在2%~5%左右,对测量环境要求比较严格.     

K-space Prony’s method for generating the basis functions of multi-Gaussian beam models

The expansion coefficients of a multi-Gaussian ultrasonic beam model are obtained by a new approach that applies Prony´s method in a K-space domain. This method allows the fitting of the Gaussian beam directly at the face of the transducer with very high computational efficiency. It is demonstrated that the K-space Prony’s method can be used to accurately model the transducer field of planar and focused piston transducers, as well as probes that do not act as pistons. The choice of parameters appearing in the method and their influence on performance are discussed.     

Algorithm for optimization of interdigital transducer in AOTF

The interdigital transducer is an important device element in acousto-optic tunable filter (AOTF) and the surface acoustic wave (SAW) propagates in lithium niobate (LiNbO₃) as a substrate in interdigital transducer. In the direction of x-cut y propagation in AOTF, the power-flux vector and propagation direction of the surface wave are not collinear, which decrease the RF-to-SAW waveguide coupling efficiency. In this paper, optimal program is proposed, giving the numerical calculation. We know that to improve the coupling efficiency the direction of interdigital transducer should be inclined about 4.5 in AOTF. The experiment shows a satisfactory result.     

Effects of the transducer dynamics in underwater acoustic communication

The inter-carrier interference (ICI) of Orthogonal Frequency Division Multiplexing (OFDM) symbols, which is caused by the transducer’s dynamics, has been analysed and simulated in this paper. The small Cyclic Prefix (CP) method is proposed to overcome the ICI caused by the transducer in order to maintain the orthogonality between sub-carriers without much loss of the energy and the bandwidth efficiency. The simulation results show that the small CP whose length is longer than the transient response of the transducer can eliminate the ICI problem.