Robust tracking for MIMO nonlinear time-dependent mismatched uncertain systems: non-adaptive versus adaptive control

This paper considers the problem of robust output-tracking controlfor multi-input multi-output (MIMO) nonlinear systems in thepresence of mismatched time-dependent uncertainties. It firstgeneralizes the stable combined-variable perturbation method(SCVPM) which was proposed by Li et al. (1996) to derive a newrobust controller and its adaptive version for MIMO systemsto track a desired trajectory. It is shown that both controllersnot only stabilize the closed-loop systems but also guaranteethat the tracking errors remain in an O() neighbourhood of theorgin, where is a small design parameter of the controller.Moreover, the adaptive robust controller is only based on thenominal system, and no a priori data on the uncertainties areneeded. Therefore, it is more feasibly implemented than thenon-adaptive controller.     

Adaptive Robust Tracking for Flexible Spacecraft in Presence of Disturbances

The paper deals with trajectory tracking for a flexible spacecraft, subject to a gravity-gradient disturbance, under parameter uncertainties. The controls are gas jets and reaction wheels, and the measured variables describe the attitude and angular velocity of the rigid part. The flexible dynamics is treated as an additional disturbance acting on a rigid structure. First, an adaptive control is designed with only the gravity-gradient disturbance acting on the spacecraft; second, it is proved to be effective also in the presence of disturbance due to the flexibility, provided that appropriate robustness conditions on the controller gains are satisfied. These conditions use partial knowledge of the parameters describing the elastic dynamics. Simulations show the good performance of such control scheme and demonstrate its applicability even in the presence of input saturation.     

Data acquisition in the EUDET project

The goal of the EUDET project is the development and construction of infrastructure to permit detector R&D for the international linear collider (ILC) with larger scale prototypes. It encompasses major detector components: the vertex detector, the tracker and the calorimeters. We describe here the status and plans of the project with emphasis on issues related to data acquisition for future test beam experiments.      

用于彩色目标跟踪的改进粒子群优化算法

提出一种用于彩色目标跟踪的改进粒子群优化算法(Improved Particle Swarm Optimization Algorithms,IP-SOA)。针对彩色目标,选择加权彩色直方图作为目标的特征,选用Bhattacharyya系数作为特征相似性度量,其最大值位置表示目标位置。对粒子群优化算法进行了改进,即自动调整惯性权重函数与认知学习因子,每次递推时对粒子速度、单帧位移总量加以限制,对Bhattacharyya系数优化,快速求取函数最大值位置。利用彩色序列图像进行仿真实验,结果表明,该方法能够实时跟踪飞机、车辆等目标,在目标被部分遮挡时能稳健跟踪。     

Uptake of magnetic nanoparticles into cells for cell tracking

A challenge for future applications in nanotechnology is the functional integration of nano-sized materials into cellular structures. Here we investigated superparamagnetic Fe₃O₄ iron oxide nanoparticles coated with a lipid bilayer for uptake into cells and for targeting subcellular compartments. It was found that magnetic nanoparticles (MNPs) are effectively taken up into cells and make cells acquire magnetic activity. Biotin-conjugated MNPs were further functionalized by binding of the fluorescent tag streptavidin–fluorescein isothiocyanate (FITC) and, following uptake into cells, shown to confer magnetic activity and fluorescence labeling. Such FITC-MNPs were localized in the lysosomal compartment of cells which suggests a receptor-mediated uptake mechanism.     

道路约束条件下的移动机器人跟踪

为提高移动机器人的位置估计精度和跟踪效果,提出一种基于道路约束条件下的移动机器人鲁棒约束H∞滤波(CHF)跟踪算法.首先,将机器人移动的道路网络作为跟踪的约束条件,并利用当前统计模型对机器人的运动进行建模.其次,将道路约束条件作为机器人跟踪的非线性状态约束,利用最小协方差估计推导了鲁棒CHF递推方程.通过拉格朗日乘子法对非线性约束优化估计问题进行求解,并利用约束信息对CHF算法的状态更新过程进行了改进.最后,通过对CHF算法和无约束的H∞滤波算法的跟踪性能进行了对比分析和验证.仿真结果表明,该算法可以实现机器人的跟踪,且跟踪精度优于HF算法.     

Direct numerical simulation of particle transport by hairpin vortices in a laminar boundary layer

The transport of solid particles by coherent wall structures is studied here. This phenomenon is present in numerous environmental and engineering flows. The flow above a wall-mounted hemisphere is used for generating hairpin vortices in a laminar boundary layer in a controlled way. By means of direct numerical simulation (DNS) of the fluid flow and simultaneous Lagrangian tracking of particles, the influence of hairpin vortices on solid particles released in the wake of the obstacle is analyzed.     

A new volume of fluid method in three dimensions—Part I: Multidimensional advection method with face‐matched flux polyhedra

A multidimensional advection scheme in 3D based on the use of face‐matched flux polyhedra to integrate the volume fraction evolution equation is proposed. The algorithm tends to reduce the formation of ‘over/undershoots’ by alleviating the over/underlapping of flux polyhedra, thus diminishing the need to use local redistribution algorithms. The accuracy and efficiency of the proposed advection algorithm, which are analyzed using different tests with prescribed velocity field, compare well with other multidimensional advection methods proposed recently. The algorithm is also applied, in combination with a Navier–Stokes solver, to reproduce the impact of a water droplet falling through air on a pool of deep water. The interfacial curvature is calculated using a height‐function technique with adaptive stencil adjustment, which provides improved accuracy in regions of low grid resolution. The comparison of the numerical results with experimental results shows a good degree of agreement. Copyright © 2008 John Wiley & Sons, Ltd.     

A new volume of fluid method in three dimensions—Part II: Piecewise‐planar interface reconstruction with cubic‐Bézier fit

A new interface reconstruction method in 3D is presented. The method involves a conservative level‐contour reconstruction coupled to a cubic‐Bézier interpolation. The use of the proposed piecewise linear interface calculation (PLIC) reconstruction scheme coupled to a multidimensional time integration provides solutions of second‐order spatial and temporal accuracy. The accuracy and efficiency of the proposed reconstruction algorithm are demonstrated through several tests, whose results are compared with those obtained with other recently proposed methods. An overall improvement in accuracy with respect to other recent methods has been achieved, along with a substantial reduction in the central processing unit time required. Copyright © 2008 John Wiley & Sons, Ltd.