单体浓度对聚合物稳定铁电液晶稳定性的影响

制备了不同单体浓度的聚合物稳定铁电液晶器件,测试了震动实验和热稳定实验前后样品的排列织构、电光特性和对比度.用原子力显微镜研究了各样品的聚合物形貌,表明在器件内部形成了沿摩擦方向延伸的聚合物网络,并且随着单体含量的增加聚合物网络更加致密.由于聚合物网络体锚定的引入,使得铁电液晶分子在外力和温度场下的运动受到限制,聚合物体锚定的增强使聚合物稳定铁电液晶的稳定性也逐渐提高.实验结果表明,单体含量为4％时,聚合物稳定铁电液晶的抗震性和热稳定性良好,电光曲线为无阈值“V”字型,对比度达150∶1.     

近期工业微生物关键技术和应用

近年来,随着宏基因组学、蛋白质组学和代谢组学等技术的发展,工业微生物技术在资源、医药和手性合成等领域已经成为热点技术,并开拓了电子和纳米技术等新的应用领域.本文综述了几项最新的工业微生物技术,主要包括:微生物环氧化水解酶催化合成手性二醇、微生物甲酸脱氢酶用于再生氧化还原反应的辅因子、通过噬菌体展示技术得到纳米级金属丝、代谢网络改造和重建用于传统发酵生产以及有机溶剂耐受菌和宏基因组技术的应用.     

The requirement of natural killer T-cells in tolerogenic APCs-mediated suppression of collagen-induced arthritis

TGF-β-induced tolerogenic-antigen presenting cells (Tol-APCs) could induce suppression of autoimmune diseases such as collagen-induced arthritis (CIA) and allergic asthma. In contrast, many studies have shown that NKT cells are involved in the pathogenesis of Th1-mediated autoimmune joint inflammation and Th2-mediated allergic pulmonary inflammation. In this study, we investigated the effect of CD1d-restricted NKT cells in the Tol-APCs-mediated suppression of autoimmune disease using a murine CIA model. When CIA-induced mice were treated with Tol-APCs obtained from CD1d^+/- or CD1d^-/- mice, unlike CD1d^+/- APCs, CD1d^-/- Tol-APCs failed to suppress CIA. More specifically, CD1d^-/- Tol-APCs failed to suppress the production of inflammatory cytokines and the induction of Th2 responses by antigen-specific CD4 T cells both in vitro and in vivo. Our results demonstrate that the presence of CD1d-restricted NKT cells is critical for the induction of Tol-APCs-mediated suppression of CIA.     

Ammeline–melamine–formaldehyde resins. Preparation and properties

Ammeline–melamine–formaldehyde resins (AMF Resins) containing 5–100 mol % of ammeline, were synthesized by polymerization of the preformed sodium salt of ammeline, melamine, and formaldehyde in basic medium by three methods. These resins, when cured, constitute a new class of thermosets. The rate of hydroxymethylation of the amino groups of the ammeline salt with formaldehyde was somewhat larger then that of the amino groups on melamine. At higher pH values ammeline insolubility was not a problem. The AMF resin composition was approximately equal to the mol ratio of the components originally charged. Both ammeline and melamine were consumed over the entire reaction period. Thus, it is possible to make approximately uniform random ammeline-melamine-formaldehyde resins (AMF) with any mol ratio of ammeline salt to melamine. By controlling the pH of the solution from which the resins were isolated, the (SINGLE BOND) O⁻ Na⁺/(SINGLE BOND) OH ratio could be varied. Resin melting points varied widely with the mol fraction of ammeline and the (SINGLE BOND) O⁻ Na⁺/(SINGLE BOND) OH ratio. AMF resin solubilities, shelf lives, cloud points, and water tolerance depended upon the method of preparation, pH, and other factors. The sodium salt of ammeline was hydroxymethylated in water more readily than ammeline. More highly methylolated ammeline species were readily formed in solution but upon precipitation only bis-N-hydroxymethylammeline was isolated. © 1996 John Wiley & Sons, Inc.     

广义近似空间的拓扑结构

在本文中,我们引入了论域X上的自反关系θ的传递化表示θs的概念,研究了拓扑空间(X,тθ)的基本性质,得到了一些有较大价值的结果,这不仅有助于理解粗糙集理论中的一些基本概念及其性质,而且对拓扑学本身都有理论和实际意义.     

On-line soft error correction in matrix–matrix multiplication

Soft errors are one-time events that corrupt the state of a computing system but not its overall functionality. Soft errors normally do not interrupt the execution of the affected program, but the affected computation results cannot be trusted any more. A well known technique to correct soft errors in matrix–matrix multiplication is algorithm-based fault tolerance (ABFT). While ABFT achieves much better efficiency than triple modular redundancy (TMR) – a traditional general technique to correct soft errors, both ABFT and TMR detect errors off-line after the computation is finished. This paper extends the traditional ABFT technique from off-line to on-line so that soft errors in matrix–matrix multiplication can be detected in the middle of the computation during the program execution and higher efficiency can be achieved by correcting the corrupted computations in a timely manner. Experimental results demonstrate that the proposed technique can correct one error every ten seconds with negligible (i.e. less than 1%) performance penalty over the ATLAS dgemm().     

Chiral stationary phases based on chitosan bis(4‐methylphenylcarbamate)‐(alkoxyformamide)

Highly N‐deacetylated chitosan was chosen as a natural chiral origin for the synthesis of the selectors of chiral stationary phases. Therefore, chitosan was firstly acylated by various alkyl chloroformates yielding chitosan alkoxyformamides, and then these resulting products were further derivatized with 4‐methylphenyl isocyanate to afford chitosan bis(4‐methylphenylcarbamate)‐(alkoxyformamide). A series of chiral stationary phases was prepared by coating these derivatives on 3‐aminopropyl silica gel. The content of the derivatives on the chiral stationary phases was nearly 20% by weight. The chiral stationary phases prepared from chitosan bis(4‐methylphenylcarbamate)‐(ethoxyformamide) and chitosan bis(4‐methylphenylcarbamate)‐(isopropoxyformamide) comparatively showed better enantioseparation capability than those prepared from chitosan bis(4‐methylphenylcarbamate)‐(n‐pentoxyformamide) and chitosan bis(4‐methylphenylcarbamate)‐(benzoxyformamide). The tolerance against organic solvents of the chiral stationary phase of chitosan bis(4‐methylphenylcarbamate)‐(ethoxyformamide) was investigated, and the results revealed that this phase can work in 100% ethyl acetate and 100% chloroform mobile phases. Because as‐synthesized chiral selectors did not dissolve in many common organic solvents, the corresponding chiral stationary phases can be utilized in a wider range of mobile phases in comparison with conventional coating type chiral stationary phases of cellulose and amylose derivatives.     

静态傅里叶变换红外光谱仪的公差分析

由于光谱分辨率或光谱信噪比只能作为光谱仪干涉系统的性能评价指标,但不能用于光学系统的公差分析与优化,所以将系统分为三个子系统:前置光学系统、干涉系统与后置光学系统,分别采用不同的评价标准分析系统公差。前置光学系统采用波像差为评价标准,给出波像差与光谱噪声的关系,分析误差对波像差的影响,间接给出各种误差对系统性能的影响。干涉系统直接采用光谱噪声作为评价标准,可直接给出各种误差对系统性能的影响。后置光学系统采用光斑尺寸作为评价标准。通过这种方法,计算出三个子系统的灵敏度矩阵,并且给出了前置光学系统与后置光学系统的公差分配。     

碳纳米纤维负载Pd-Pt催化剂的萘加氢耐硫性能

Catalytically-grown carbon nanofibers of two different conformations,fishbone and parallel types of the arrangement of carbon layers,were employed as the support of Pd-Pt metal catalysts for the hydrogenation of naphthalene to tetralin. The sulfur tolerance of the catalyst system was investigated with the addition of 0. 05% thiophene to the reactant of naphthalene in the process. The dispersion of Pd-Pt metal particles on the support was observed with a HREM and a pulsed hydrogen chemisorption method. The hydrogenation reaction of naphthalene was carried out in a CSTR at 250℃ and with the hydrogen pressure of 6 MPa. The results showed that the Pd-Pt catalyst supported on the carbon nanofibers was active in the process. The Pd-Pt metal catalyst supported on the parallel carbon nanofibers showed a higher sulfur tolerance than that on the fishbone carbon nanofibers. The reason may be attributed to their different conformations of the carbon layers,which leads to the different interaction of carbon layers with the supported metal particles.     

强阴离子型丙烯酰胺共聚物P(AM-co-NaAMPS)的结构与性能

在水介质中实施了丙烯酰胺 (AM)与 2 丙烯酰胺基 2 甲基丙磺酸钠 (NaAMPS)的溶液共聚合 ,制备了组成系列变化的强阴离子型共聚物P(AM co NaAMPS) ;通过红外光谱法与元素分析法对共聚物的组成进行了表征 ;稀释外推粘度法测定了共聚物的特性粘数及Huggins常数 ;测定了共聚物纯水溶液及盐水溶液的表观粘度及高温下共聚物盐水溶液的粘度保持率 ;重点考察了共聚物的结构与组成对其各种性能的影响规律 .实验结果表明 ,在聚丙烯酰胺 (PAM)分子主链上引入NaAMPS链节后 ,磺酸根的强阴离子性与庞大侧基的位阻效应 ,赋于共聚物P(AM co NaAMPS)以优良的溶解、增稠、耐温与抗盐性能 ,且这些性能随共聚物的结构与组成的改变发生规律性的变化 .