Syntheses of Some New Group 4 non-Cp Complexes Bearing Schiff-base, Thiophene Diamide Ligands Respectively and Their Catalytic Activities for α-Olefin Polymerization

Introduction Tremendous advances have been witnessed during the last decade in the syntheses and application of Group 4 metal complexes because of the motivity which comes from both academic and industrial field. Among them, studies have been dominated by the complexes supported by bis or mono cyclopentadienyl ligands, such as Cp2MX2 or half sandwich amide (CGC) com-plexes.1-6 At that time chemists paid a little attention to the non-cyclopentadienyl complexes, but in recent years, many chem…     

低价钛引起的芳酮肟的反应

在低价钛试剂 (TiCl4/Sm)作用下取代苯乙酮肟发生脱肟反应生成酮 ,而在同样条件下 ,二芳酮肟则生成二芳酮、胺或希夫碱     

锌族和钛族卤化物振动光谱的理论计算

采用ab initio RHF,MP2和B3LYP方法以及LanL2DZ和SDD基组计算了四面体锌族卤素阴离子化合物(MX₄^2-,M=Zn(Ⅱ),Cd(Ⅱ),Hg(Ⅱ);X=F^-,Cl^-,Br^-,I^-)和钛族卤化物(MX₄,M=Ti(Ⅳ),Zr(Ⅳ),Hf(Ⅳ);X=F^-,Cl^-,Br^-,I^-)的几何构型和振动频率。计算结果表明,LanL2DZ基组是合适的基组,能得到合理的电荷分布,几何参数以及振动频率。在锌族卤化物的计算中发现,角弯曲振动频率与实测值相当一致,键伸缩振动频率略为偏低,这主要是由于计算的键长略为偏长所致。MP2方法计算的振动频率更接近于实测值。在钛族卤化物的计算中,三种计算方法都相当地再现了实测值,而以B3LYP方法更为满意。     

Thermo-Responsive ZnPc-g-TiO2-g-PNIPAM Photocatalysts Sensitized with Phthalocyanines for Water Purification under Visible Light

A novel thermo-responsive 2,9(10),16(17),23(24)-tetrakis[(3-carboxyacrylamide) phthalocyaninato] zinc (ZnPc)-g-TiO₂-g-poly(N-isopropylacrylamide) (PNIPAM) photocatalyst modified with phthalocyanines was prepared. The photocatalyst exhibited thermo-responsive properties due to the introduction of PNIPAM, which performed recovery for reuse above the lower critical solution temperature (LCST, about 26 °C). ZnPc-g-TiO₂-g-PNIPAM effectively expanded the light response range to the visible light region and inhibited the recombination of electron–hole pairs, which enhanced the performance of the photocatalyst. As expected, ZnPc-g-TiO₂-g-PNIPAM (0.3 g/L) exhibited excellent photocatalytic performance for the removal of Rhodamine B (RhB, 1.0 × 10⁻⁵ mol/L) and methylene blue (MB, 1.0 × 10⁻⁵ mol/L) under visible light, which reached 97.2% and 88.6% at 20 °C within 40 min, respectively. Furthermore, the influence of temperature upon photocatalytic performance was also investigated. When the temperature increased from 20 °C to 45 °C, the removal of RhB decreased by approximately 53.8%. The stability of the photocatalyst demonstrated that the photocatalytic activity was still above 80% for the removal of RhB after 3 cycles. Above all, this work provided an intelligent thermally responsive photocatalyst based on phthalocyanine for water purification under visible light.     

Photoelectrochemical Properties of Annealed Anodic TiO2 Layers Covered with CuOx

In this work, we present a systematic study on the influence of Cu²⁺ ion concentration in the impregnation solution on the morphology, structure, optical, semiconducting, and photoelectrochemical properties of anodic CuO_x-TiO₂ materials. Studied materials were prepared by immersion in solutions with different concentrations of (CH₃COO)₂Cu and subjected to air-annealing at 400 °C, 500 °C, or 600 °C for 2 h. The complex characterization of all studied samples was performed using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), reflectance measurements, Mott–Schottky analyses, and photocurrent measurements. It was found that band gap engineering based on coupling CuO with TiO₂ (E_g~3.3 eV) is an effective strategy to increase the absorption in visible light due to band gap narrowing (CuO_x-TiO₂ materials had E_g~2.4 eV). Although the photoactivity of CuO-TiO₂ materials decreased in the UV range due to the deposition of CuO on the TiO₂ surface, in the Vis range increased up to 600 nm at the same time.     

Exogenous Application of Green Titanium Dioxide Nanoparticles (TiO2 NPs) to Improve the Germination,Physiochemical, and Yield Parameters of Wheat Plants under Salinity Stress

Agriculture is the backbone of every developing country. Among various crops, wheat (Triticum aestivum L.) belongs to the family Poaceae and is the most important staple food crop of various countries. Different biotic (viruses, bacteria and fungi) and abiotic stresses (water logging, drought and salinity) adversely affect the qualitative and quantitative attributes of wheat. Among these stresses, salinity stress is a very important limiting factor affecting the morphological, physiological, biochemical attributes and grain yield of wheat. This research work was carried out to evaluate the influence of phytosynthesized TiO₂ NPs on the germination, physiochemical, and yield attributes of wheat varieties in response to salinity. TiO₂ NPs were synthesized using TiO₂ salt and a Buddleja asiatica plant extract as a reducing and capping agent. Various concentrations of TiO₂ nanoparticles (20, 40, 60 and 80 mg/L) and salt solutions (NaCl) (100 and 150 mM) were used. A total of 20 mg/L and 40 mg/L improve germination attributes, osmotic and water potential, carotenoid, total phenolic, and flavonoid content, soluble sugar and proteins, proline and amino acid content, superoxide dismutase activity, and reduce malondialdhehyde (MDA) content at both levels of salinity. These two concentrations also improved the yield attributes of wheat varieties at both salinity levels. The best results were observed at 40 mg/L of TiO₂ NPs at both salinity levels. However, the highest concentrations (60 and 80 mg/L) of TiO₂ NPs showed negative effects on germination, physiochemical and yield characteristics and causes stress in both wheat varieties under control irrigation conditions and salinity stress. Therefore, in conclusion, the findings of this research are that the foliar application of TiO₂ NPs can help to improve tolerance against salinity stress in plants.     

Applications of Titanium Dioxide Nanostructure in Stomatology

Breakthroughs in the field of nanotechnology, especially in nanochemistry and nanofabrication technologies, have been attracting much attention, and various nanomaterials have recently been developed for biomedical applications. Among these nanomaterials, nanoscale titanium dioxide (nano-TiO₂) has been widely valued in stomatology due to the fact of its excellent biocompatibility, antibacterial activity, and photocatalytic activity as well as its potential use for applications such as dental implant surface modification, tissue engineering and regenerative medicine, drug delivery carrier, dental material additives, and oral tumor diagnosis and treatment. However, the biosafety of nano-TiO₂ is controversial and has become a key constraint in the development of nano-TiO₂ applications in stomatology. Therefore, in this review, we summarize recent research regarding the applications of nano-TiO₂ in stomatology, with an emphasis on its performance characteristics in different fields, and evaluations of the biological security of nano-TiO₂ applications. In addition, we discuss the challenges, prospects, and future research directions regarding applications of nano-TiO₂ in stomatology that are significant and worthy of further exploration.     

金银/氮化钛表面增强拉曼基底制备及对烟酸的定量检测

表面增强拉曼光谱技术对分子具有特异性识别以及快速无损检测的能力,使其在药物检测方面具有重大的潜力。通过贵金属和氮化钛之间协同作用,使复合基底具有较高的SERS性能,提供了一种基于SERS技术的药物检测方法。采用电化学沉积及自组装法,制备出贵金属/氮化钛复合薄膜。研究表明,在复合薄膜中存在面心立方晶型TiN、金属单质Au和Ag三种物相;电子显微镜显示平均粒径分别为90和50 nm的金属Au和Ag颗粒均匀分布在TiN薄膜表面;基底的紫外-可见吸收图谱中出现了贵金属金与银纳米颗粒及TiN薄膜三者的特征等离子体共振吸收峰。以该复合薄膜为SERS基底,对烟酸溶液进行拉曼检测。结果显示,贵金属/氮化钛复合薄膜对烟酸具有显著的SERS效应,最低检测浓度为10-5 mol·L-1,对1 033 cm-1处烟酸拉曼信号强度及浓度取对数,发现两者间呈一定线性关系,其R2为0.969,得益于TiN,Au和Ag之间可发生表面等离子体共振引起电磁场增强,以及电荷转移效应。研究还发现,烟酸通过COO-基团垂直吸附在贵金属/氮化钛基底表面;在酸性环境下,烟酸N原子质子化主要以阳离子N＋H（Ⅰ）形式存在;在碱性环境时,主要以阴离子COO-（Ⅲ）形式存在。绞股蓝总甙溶液中模拟烟酸非法添加,该复合基底对其最低的拉曼检测浓度是10-5 mol·L-1,为现场快速检测非法添加药物提供了新途径。     

Infrared absorption spectra and structure of TiO2-SiO2 composites

The composites xTiO₂-(1−x)SiO₂ (x = 0.1, 0.5, 0.9) were obtained by coprecipitation from solutions of alkoxides: tetraethoxysilane (TEOS) and titanium tetraisopropoxide (TIPT). Intermolecular interaction of the components of the composite is apparent in the IR absorption spectra in the 928–952 cm⁻¹ region, and is connected with bending vibrations of the Si-O-Ti bond. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 75, No. 5, pp. 724–728, September–October, 2008.