Improved Photovoltaic Performance of MEH-PPV/PCBM Solar Cells via Incorporation of Si Nanocrystals

We have studied the effect of silicon nanocrystals （SiNCs） as a third component on performance of organic bulk heterojunction solar cells composed of poly[2-methoxy,5-（2＇-ethylhexyloxy）-l,4-phenylene vinylene] （MEH- PPV）：[6,6]-phenyI-C61-butyric acid methyl ester （PCBM） blend film. By adding suitable amounts of SiNCs into MEH-PPV：PCBM blend, the device performance such as external quantum efficiency, short circuit current density （Js（）, and power conversion efficiency （PCE） improved. Incorporation of 2.5% SiNCs in the blend led to 13.6% improvement of Jsc, which in turn resulted in 18% improvement of PCE up to 2.28%. The improved performance was mainly due to the improvements both in the charge generation from the interface of MEH-PPV/SiNCs and the charge collection at the cathode.     

基于绿色氢科学理念构筑从低碳制氢到高效储氢的氢能体系

本文从低碳制氢和高效储氢的角度思考及探讨氢能体系绿色化发展过程中的关键科学问题.提出＂绿色氢科学＂理念与＂低碳制氢,高效储氢＂技术发展路线图,以期通过相关科学问题的认识,来构建具有高度原子经济性及可持续性的绿色氢能体系.     

Polypeptide/Doxorubicin Hydrochloride Polymersomes Prepared Through Organic Solvent‐free Technique as a Smart Drug Delivery Platform

Rapid and efficient side‐chain functionalization of polypeptide with neighboring carboxylgroups is achieved via the combination of ring‐opening polymerization and subsequent thiol‐yne click chemistry. The spontaneous formation of polymersomes with uniform size is found to occur in aqueous medium via electrostatic interaction between the anionic polypeptide and cationic doxorubicin hydrochloride (DOX·HCl). The polymersomes are taken up by A549 cells via endocytosis, with a slightly lower cytotoxicity compared with free DOX ·HCl. Moreover, the drug‐loaded polymersomes exhibit the enhanced therapeutic efficacy, increase apoptosis in tumor tissues, and reduce systemic toxicity in nude mice bearing A549 lung cancer xenograft, in comparison with free DOX ·HCl.     

Estimation of the breakthrough volume of selected steroids for C‐18 solid‐phase extraction sorbent using retention data from micro‐thin layer chromatography

SPE method is a very popular technique, and is commonly used for the prepurification, concentration, and isolation of different organic compounds from variable matrices. In this work, the optimization of SPE process was carried out. The breakthrough volume of solid sorbents based on octadecylsilane was determined and three methods were compared: (1) calculation one – the breakthrough volume was calculated using retention factor k determined with micro‐TLC method, frontal analysis – (2) breakthrough volume was determined as volume of whole elution peak, and (3) breakthrough volume was determined as the center of peak gravity. For calculation method, the k values of key estrogens and progestogens were derived from the micro‐TLC experiment reported previously. By combining these three methods, we can point the start of elution, the maximum concentration of analyte in eluate, and the whole eluent volume, which is necessary to achieve an appropriate selectivity and high extraction recovery. Proposed calculation method allows to estimate the beginning of the steroid peak, when the analyte appears in the eluate flowing from the sorbent. Such observation advances the SPE optimization protocol that was described before and was based on the correlation between raw k_SPE and k_micro‐TLC data.     

An interesting two‐phase solvent system and its use in preparative isolation of aconitines from aconite roots by counter‐current chromatography

Two‐phase solvent system plays crucial role in successful separation of organic compounds using counter‐current chromatography (CCC). An interesting two‐phase solvent system, composed of chloroform/ethyl acetate/methanol/water, is reported here, in which both phases contain sufficient organic solvents to balance their dissolving capacities. Adjusting the solvent system to get satisfactory partition coefficients (K values) for target compounds becomes relatively simple. This solvent system succeeded in sample preparation of aconitine (8.07 mg, 93.69%), hypaconitine (7.74 mg, 93.17%), mesaconitine (1.95 mg, 94.52%) from raw aconite roots (102.24 mg, crude extract), benzoylmesaconine (34.79 mg, 98.67%) from processed aconite roots (400.01 mg, crude extract), and yunaconitine (253.59 mg, 98.65%) from a crude extract of Aconitum forrestii (326.69 mg, crude extract).     

Compressed matrix thin film (CMTF)-assisted laser desorption ionization mass spectrometric analysis

The inhomogeneous re-crystallization process of matrix materials is the major concerns associated with matrix assisted laser desorption/ionization (MALDI) analysis. We describe here the approach termed compressed matrix thin film (CMTF) in order to make a uniform matrix deposition. In this approach, solid matrix particles are compressed under 10 MPa of pressure by a compressor that is regularly used in infrared spectroscopic analysis. Then aqueous samples can be deposited on the surface of the matrix film. Major advantages of the CMTF approach are summarized as follows. (1) Reproducible sample preparation procedure. Size and thickness of matrix thin films can be controlled by using a fixed mold.force and known amount of matrix materials. (2) Significantly decreased shot-to-shot variations and enhanced reproducibility. (3) Tolerance for in situ salt washing. Because matrix materials are hydrophobic, salts can be washed away while proteins or peptides are retained on the surface of matrix thin films through hydrophobic interactions. (4) Improved sensitivity. The hydrophobic coating of MALDI sample plate by matrix thin films prevents the spreading of samples across the plate and confines analytes to a small area, leading to increased local concentration. (5) A new means for tissue analysis. Tissue sections can be directly transferred to the uniform surface of matrix materials for reproducible and quantitative comparison of different molecules in different localization. The proposed CMTF should be an enabling technique for mass spectrometric analysis with improved correlations between signal intensities and sample quantities.     

Automated,high performance,flow-through chemiluminescence microarray for the multiplexed detection of phycotoxins

A novel multiplexed immunoassay for the analysis of phycotoxins in shellfish samples has been developed. Therefore, a regenerable chemiluminescence (CL) microarray was established which is able to analyze automatically three different phycotoxins (domoic acid (DA), okadaic acid (OA) and saxitoxin (STX)) in parallel on the analysis platform MCR3. As a test format an indirect competitive immunoassay format was applied. These phycotoxins were directly immobilized on an epoxy-activated PEG chip surface. The parallel analysis was enabled by the simultaneous addition of all analytes and specific antibodies on one microarray chip. After the competitive reaction, the CL signal was recorded by a CCD camera. Due to the ability to regenerate the toxin microarray, internal calibrations of phycotoxins in parallel were performed using the same microarray chip, which was suitable for 25 consecutive measurements. For the three target phycotoxins multi-analyte calibration curves were generated. In extracted shellfish matrix, the determined LODs for DA, OA and STX with values of 0.5 ± 0.3 μg L⁻¹, 1.0 ± 0.6 μg L⁻¹, and 0.4 ± 0.2 μg L⁻¹ were slightly lower than in PBS buffer. For determination of toxin recoveries, the observed signal loss in the regeneration was corrected. After applying mathematical corrections spiked shellfish samples were quantified with recoveries for DA, OA, and STX of 86.2%, 102.5%, and 61.6%, respectively, in 20 min. This is the first demonstration of an antibody based phycotoxin microarray.     

Optimization of Chemo‐Enzymatic Epoxidation of Cyclohexene Mediated by Lipases

Abstract

This work describes the lipase‐mediated epoxidation of cyclohexene. Lipases were used to generate peroxyoctanoic acid directly from octanoic acid and hydrogen peroxide and applied in situ to obtain cyclohexene oxide. Various parameters, which could affect this reaction, were studied such as lipases from different sources, organic solvents, temperature and acyl donor concentrations. Highest conversions to cyclohexene epoxide were achieved using a two‐phase system of toluene or xylene/water with ROL (Amano F‐Ap15 free Rhizopus orizae lipase) (84 and 80%) or CALB (Novozymes 435®‐immobilized Candida antarctica lipase type B) (>9 and 84%) as biocatalysts. Using PSL (Amano PS‐free Pseudomonas sp) the conversions were in the range of 12–53%, but an improvement was obtained by the use of the ionic liquid 1‐butyl‐3‐methylimidazolium tetrafluoroborate (20 to 41% in water/methyl dichloride).     

Multifractal analysis for Cu/Ti bilayer thin films

Two bilayer thin films with different stacking sequences, Cu/Ti/Si and Ti/Cu/Si, were deposited by DC magnetron sputtering technique. X‐ray diffraction technique was used to measure the crystallization structures, and scanning electron microscopy and atomic force microscopy were used to measured surface morphology. The multifractal spectra f(α)‐α was used to characterize the surface morphology. The result of |q|_max ≤ 53 is obtained by multifractal analysis. The shape of the multifractal spectra f(α) ? α is hook‐like for Cu/Ti/Si and bell jar‐like for Ti/Cu/Si. The spectrum width Δα = α_max ? α_min and Δf(=f(α_min) ? f(α_max)) of the multifractal spectra is able to quantitatively analyze the growth and surface roughness of the Cu/Ti bilayer thin films. The surface of Ti/Cu/Si thin film is more uniform and smoother than the film of Cu/Ti/Si. Copyright © 2013 John Wiley & Sons, Ltd.     

Broadband dielectric characterization of piezoelectric poly(vinylidene fluoride)thin films between 278 K and 308 K

This work describes the dielectric properties of piezoelectric poly(vinylidene fluoride) (PVDF) thin films in the frequency and temperature ranges relevant for usual applications. We measured the isothermal dielectric relaxation spectra of commercial piezoelectric PVDF thin films between 10 Hz to 10 MHz, at several temperatures from 278 K to 308 K. Measurements were made for samples in mechanically free and clamped conditions, in the direction of the poling field (perpendicular to the film). We found that the imaginary part of the dielectric relaxation spectra of free and clamped PVDF samples is dominated by a peak, above 100 kHz, that can be characterized by a Havriliak-Negami function. The characteristic time follows an Arrhenius dependence on temperature. Moreover, the spectra of the free PVDF samples show two additional peaks at low frequencies which are associated with mechanical relaxation processes. Our results are important for the characterization of piezoelectric PVDF, particularly after the stretching and poling processes in thin films, and for the design and characterization of a broad range of ultrasonic transducers.