一种基于效率矩阵的网络节点重要度评价算法

为了实现对网络节点重要性的有效评价,提出一种基于网络效率矩阵的节点重要度评价算法.该方法综合考虑节点的度值(局部重要度)和网络节点之间的重要性贡献(全局重要度),利用节点的度和效率矩阵表征网络节点的重要度贡献,克服重要性贡献矩阵法中节点只依赖于邻接节点的不足.考虑实际网络的稀疏性,该算法的时间复杂度为O(n²).通过算例分析验证了该算法的可行性和有效性,结果表明:该算法能够更加直观、简单有效地区分节点的重要度差异,并且对于大型复杂网络具有较理想的计算能力.     

沟道层厚度对室温制备的In2O3薄膜晶体管器件性能的影响

在室温下采用直流磁控溅射以SiO₂/Si为衬底制备了不同沟道层厚度的底栅式In₂O₃薄膜晶体管,讨论了沟道层厚度对底栅In₂O₃薄膜晶体管的电学性能的影响。实验结果表明:器件的特性与沟道层厚度有关,最优沟道层厚度的In₂O₃薄膜晶体管为增强型,其阈值电压为2.5 V,开关电流比约为10⁶,场效应迁移率为6.2 cm²·V^-1·s^-1。     

荧光染料掺杂的高效率、高亮度白色有机电致发光器件

制备了结构为 ITO/NPB（30 nm）/Rubrene（0.2 nm）/CBP：Bczvbi（8 nm,x%）/Bphen（30 nm）/Cs₂CO₃：Ag₂O（2 nm,20%）/Al（100 nm）的器件。研究了Bczvbi掺杂浓度（x=5,10,15）对白光器件性能的影响。综合利用发光层中主客体之间的能量转移和空穴阻挡层的空穴阻挡特性,得到了高效率、高亮度的白色有机电致发光器件。当Bczvbi的掺杂质量分数为10%时,器件的效率和亮度都为最大。驱动电压为7 V时,最大电流效率为4.61 cd/A;驱动电压为9 V时,最大亮度为21 240 cd/m²。当驱动电压从4 V增加到9 V时,色坐标从（0.36,0.38）变化为（0.27,0.29）,均处于白光区域。     

直流大气压电晕放电电子密度的光谱研究

利用自制针—板式放电装置,在大气中进行电晕放电实验。用发光区域照片光斑的大小,讨论了电晕层厚度与电源电压的关系。在相同针板间距下,电晕层厚度随着电压的升高而增大;在相同电压下,电晕层厚度随着针板间距的增大而减小。由于高能电子密度能够通过氮分子第二正带系337.1 nm的光谱强度大小反映,因此对氮分子第二正带系337.1 nm谱线的强度用发射光谱法进行了测量。实验结果发现在针尖附近高能电子密度最大,并且高能电子密度随电压的升高而增大;电压一定时,高能电子密度随针板间距的增大而减小。在针板间距和电源电压不变的情况下,高能电子密度随针尖曲率半径的减小而增大。     

中波红外3 μm～5 μm宽带通滤光片的研制

 中波红外宽带通滤光膜通常膜系层数多,膜层总厚度非常大（厚度达到10 μm左右）,膜层的镀制工艺难度较大。通过分析红外带通滤光片几种设计方法的特点,并结合实际镀制工艺技术,采用了长波通与短波通及非规整薄膜设计技术相结合的方法,设计了以锗材料为基底的中波3 μm～５ μm宽带通滤光膜。该设计大幅度降低了膜层的总厚度（约为8.65 μm）,缩短了膜层的镀制周期,提高了膜层的牢固度;在膜层的镀制工艺过程中,通过改变薄膜材料的蒸发速率、修正蒸发硫化锌材料时电子枪的扫描方式、调整蒸发材料在坩埚中的装载方法,使膜层获得了优异的光谱性能,其通带平均透过率大于96%,截止区域的平均透过率小于1%。     

Optical microstrip patch antennas design and analysis

This paper has presented transparent conductor oxide materials (TCOMs) based microstrip patch antennas with glass substrate and copper ground plane, which have been deeply analyzed in the visible spectrum region in comparison with the practical patch antenna model of indium tin oxide patch with glass substrate and different TCOMs based ground plane. As well as the study have investigated the effect of transparent oxide materials on patch antenna design instead of perfect conductor materials such as copper that has low cost and weight. The tradeoff between optical transparency and electrical conductivity will be evaluated for a range of visible regions. Microstrip transmission line feed method is used to predict the skin effects on a patch antenna and their impact on antenna efficiency, resonance frequency and optical transmission are also described. This study have discussed assessment of these tradeoffs and effect of TCOMs parameters on antenna design.     

A detailed study of metallic surface-relief grating

This paper presents a more detailed interaction of an electromagnetics light with a metallic surface-relief subwavelength grating utilizing the rigorous coupled-wave analysis. The focus of this work is the accurate modeling of undetermined aspects of diffraction patterns produced by binary metallic grating structures, specially gold grating. First-order diffraction efficiency for rectangular-groove gold grating with equal groove and ridge widths are presented for various wavelengths as a function of period, groove depth, polarization and angle of incidence. We also studied diffraction efficiency of both of TE and TM polarization modes against increasing of incident angle as well as TE polarization against increment of grating period. As a result, very low reflectivity at zero-order was found out for TE and TM polarizations at the pitch of Λ = 2λ. Having been studied diffraction efficiency of metallic surface-relief gratings, we also examined polarization-dependent efficiency of diffraction orders, for different groove depths. Simulation results have been completely presented.     

Color-stable,reduced efficiency roll-off hybrid white organic light emitting diodes with ultra high brightness

High-brightness and color-stable two-wavelength hybrid white organic light emitting diodes (HWOLEDs) with the configuration of indium tin oxide (ITO)/ N, N, N, N-tetrakis(4-methoxyphenyl)-benzidine (MeO-TPD): tetrafluoro-tetracyanoqino dimethane (F4-TCNQ)/N,N-di(naphthalene-1-yl)-N,N-diphenyl-benzidine (NPB)/ 4,4-N,N-dicarbazolebiphenyl (CBP): iridium (III) diazine complexes (MPPZ) 2 Ir(acac)/NPB/2-methyl-9,10-di(2-naphthyl)anthracene (MADN): p-bis(p-N,N-di-phenyl-aminostyryl)benzene (DSA-ph)/bis(10-hydroxybenzo[h] quino-linato)beryllium complex (Bebq2)/LiF/Al have been fabricated and characterized. The optimal brightness of the device is 69932 cd/m2 at a voltage of 13 V, and the Commission Internationale de l'Eclairage (CIE) chromaticity coordinates are almost constant during a large voltage change of 6-12 V. Furthermore, a current efficiency of 15.3 cd/A at an illumination-relevant brightness of 1000 cd/m2 is obtained, which rolls off slightly to 13.0 cd/A at an ultra high brightness of 50000 cd/m2. We attribute this great performance to wisely selecting an appropriate spacer together with effectively utilizing the combinations of exciton-harvested orange-phosphorescence/blue-fluorescence in the device. Undoubtedly, this is one of the most exciting results in two-wavelength HWOLEDs up to now.     

Investigation of proton channeling using nuclear-reaction resonances

To investigate orientation effects, an approach based on the measurements of γ-ray yields following the excitation of “narrow" isolated resonances in the reactions occurring on the nuclei of interstitial impurity atoms, that occupy certain positions in a crystal, has been proposed. The carbon atoms were shown to be located in octahedral interstitial sites of the Re-0.4 at. % ¹³C monocrystalline solution. The proton flux distribution in the (0001) channel was investigated via the 1.7476 MeV resonance of the ¹³C(p,γ)¹⁴N reaction. Some particular qualities of the reaction yield were found to be dependent upon the proton energy. The method of measurement of the electronic stopping power of channeled particles has been deduced. The γ-ray yield of the resonance reactions induced by the channeled protons was shown to be dependent on the amplitude of the thermal vibrations of carbon atoms.     

Comparison of detection efficiencies of negatively charged gold-alkanethiolate-, gold-sulfur- and gold-clusters in ToF-SIMS

In order to improve quantification of high mass ions, the influence of cluster composition on detection efficiencies has been studied using a TOF-SIMS IV with the extended capability of postaccelerating ions up to 20 keV. In this experimental study, we focus on the comparison of detection efficiencies for three types of negatively charged secondary cluster ions: gold-alkanethiolate-clusters (Au_xM_y), gold-sulfur-clusters (Au_xS_y) and gold-clusters (Au_x). The clusters were sputtered from self-assembled monolayers of hexadecanethiols on gold substrates using 10 keV Ar⁺ primary ions. The detection efficiencies were derived on the basis of a function for the secondary electron yield and a fourth-order approximated Poisson probability distribution for electron propagation and amplification within the microchannel plate.In addition to the well-known dependence of detection efficiencies on ion mass and energy, which has already been studied for positively charged ions, we were able to show a similar behaviour for the investigated negatively charged secondary ions. We have observed major variations among the three types of clusters at similar mass and energy as predicted in a theoretical approach. The observed differences are due to the different composition of the investigated clusters which has a major influence on the kinetic ion induced electron emission within the microchannel plate. For the first time it was possible to experimentally verify these predictions for detection efficiencies.