Numerical investigation of particle lateral migration in straight channel flows using a direct-forcing immersed boundary method

Inertia-induced cross-stream migration has been recently exploited for precise position of particles in confined channel flows. In this work, a three-dimensional finite volume based immersed boundary method has been developed to study the lateral migration and hydrodynamic self-assembly of neutrally-buoyant particles in pressure-driven flows. Simulation results show that, in 2D channel flows, the equilibrium position for a circular particle is closer to the centreline for larger particle Reynolds number due to the increasing flow rate, while in 3D square duct flow, the equilibrium position for a spherical particle is near a face centre and is closer to the wall for larger particle Reynolds number. Self-assembly of a pair of particles is observed in 3D square duct flows but not in 2D channel flows. Mechanisms for the self-assembly are discussed.     

放射性核素迁移研究的现状与进展

本文介绍了放射性核素迁移研究的方法、影响核素迁移的一些因素及一些重要核素迁移研究的现状与进展,对存在的一些问题及今后的发展方向进行了讨论。     

纺织品与食品包装材料中烷基酚及双酚A迁移量的液相色谱-串联质谱分析

建立了纺织品与食品包装材料中烷基酚及双酚A迁移量的液相色谱-串联质谱分析方法.纺织品和食品包装材料浸泡液经Supelclean Envi-Carb石墨化碳黑固相萃取柱净化,以Waters XBridge C_(18)(150 mm×2.1 mm,3.5 μm)色谱柱分离后,进行LC-MS/MS多反应监测模式下的定性及定量分析.烷基酚和双酚A在纺织品模拟汗液、食品模拟物介质中特定迁移量的定量下限分别为2、4 μg/kg.在低、中、高3个添加水平下,测得纺织品样品的回收率为83%～91%,相对标准偏差为4.1%～9.0%;食品包装材料样品的回收率为82%～94%,相对标准偏差为3.9%～8.7%.     

The limiting current density of copper electrodeposition on vertical electrode under the conditions of electrolyte natural convection

The problem of determining the limiting current density of copper electrodeposition on the vertical electrode under the conditions of electrolyte natural convection is solved numerically. The incomplete dissociation of copper sulfate and sulfuric acid by the second stage and the concentration dependences of physicochemical properties of solution are taken into consideration. The effect of incomplete dissociation of copper sulfate and sulfuric acid by the second stage on the ionic transport in the copper electrodeposition and on the limiting current density is estimated by comparing the results, which are calculated taking into account and ignoring the concentration dependences of dissociation constants, and also for the limiting cases of virtually complete dissociation of copper sulfate and sulfuric acid. It is shown that, in excess of supporting electrolyte, incomplete dissociation of copper sulfate and sulfuric acid only slightly affects the limiting current density: the limiting current density changes not more than by 10% with the variation of the dissociation constants by several orders of magnitude. At the moderate and small concentrations of supporting electrolyte, incomplete dissociation should be taken into account, because the error of limiting current density can exceed 50%.     

多壁碳纳米管固相萃取-高效液相色谱-串联质谱法测定食品接触材料中双酚-二环氧甘油醚的迁移量

建立了测定食品接触材料中6种双酚-二环氧甘油醚(双酚A二缩水甘油醚(BADGE)及其衍生物双酚A(2,3-二羟丙基)甘油醚(BADGE•H2O)、双酚A(3-氯-2-羟丙基)甘油醚(BADGE•HCl)、双酚A(3-氯-2-羟丙基)(2,3-二羟丙基)醚(BADGE•H2O•HCl)和双酚F二缩水甘油醚(BFDGE)及其衍生物双酚F双(3-氯-2-羟丙基)甘油醚(BFDGE•2HCl))迁移到食品中的迁移量的高效液相色谱-串联质谱法(HPLC-MS/MS)。样品以叔丁基甲醚(MTBE)为提取溶剂,超声提取,提取液经多壁碳纳米管(MWCNTs)固相萃取(SPE)柱富集、净化。以COSMOSIL C18为分析柱,流动相为0.1%甲酸的5 mmol/L醋酸铵溶液和甲醇。6种双酚-二环氧甘油醚在1.0～100 μg/L范围内线性关系良好(r2＞0.9991)。在3个添加水平下,6种目标化合物的回收率范围为78.6%～89.9%,相对标准偏差小于10%。方法检出限范围为0.5～1.5 μg/L。该方法操作简单,灵敏度高,可应用于食品接触材料中双酚-二环氧甘油醚迁移量的快速检测。     

婴幼儿奶瓶中迁移双酚A的高效液相色谱-电喷雾串联质谱检测方法研究

建立了婴幼儿奶瓶中双酚A(BPA)迁移量的高效液相色谱-电喷雾串联质谱(HPLC-ESI-MS/MS)测定方法。奶瓶食品模拟浸泡液经过弗罗里硅土玻璃层析柱净化,高效液相色谱分离,采用选择反应性监测模式(SRM)检测。以一级质谱得到的准分子离子m/z 227作为母离子,进行二级质谱(MS2)分析。选择MS2的碎片离子m/z 212、133、93定性确证,m/z 212作为定量离子定量。实验优化了质谱条件,并对二级质谱碎裂机理和特征离子进行了研究。测定结果的相对标准偏差不大于8.2%(n=7),回收率在87.7%～105%之间;检出限为2μg/L,能够满足欧盟、美国等对奶瓶中双酚A的限制要求。该法已成功应用于婴幼儿奶瓶中BPA迁移量的测定。     

高效液相色谱法测定食品接触材料中苯酚和4-叔丁基苯酚迁移量

提出了食品接触材料在水、3％(质量分数)乙酸溶液、乙醇(1+9)溶液、异辛烷4种食品模拟物中苯酚、4-叔丁基苯酚迁移量的高效液相色谱测定方法.不同种类的食品模拟物采用不同的样品前处理方法提取后,用Diamonsil C18色谱柱为固定相,甲醇-水为流动相梯度洗脱,以激发波长220 nm、发射波长312nm的荧光检测器进...     

在线富集/高效液相色谱与电感耦合等离子体质谱联用测定玩具中超痕量可迁移六价铬

采用在线富集/高效液相色谱(HPLC)与电感耦合等离子体质谱(ICP-MS)联用技术,建立了玩具中超痕量可迁移六价铬的测定方法。以10 mmol/L硝酸铵为流动相,样品在Agilent BIO WAX NP5阴离子交换柱(4.6 mm×50 mm,5μm)中富集,再通过阀切换,以75 mmol/L硝酸铵将六价铬洗脱至Dionex AG7阴离子柱(4.0 mm×50 mm,10μm)中分离,最后经ICP-MS进行分析。优化得到在线富集时间为4 min,进样量为900μL,富集流速为0.4 mL/min,洗脱流速为0.6 mL/min。结果显示,六价铬在2～20 ng/L范围内线性良好,检出限为1.93 ng/L,相对标准偏差(RSD)为3.9%。与直接进样相比,浓缩因子约为8.1倍,富集效率约为90%。对欧盟玩具安全指令2009/48/EC规定的3类玩具材料在5、10 ng/L的浓度水平下进行加标回收,回收率为93.4%～111%。     

3D HYBRID DEPTH MIGRATION AND FOUR-WAY SPLITTING SCHEMES

The alternately directional implicit （ADI） scheme is usually used in 3D depth migration. It splits the 3D square-root operator along crossline and inline directions alternately. In this paper, based on the ideal of data line, the four-way splitting schemes and their splitting errors for the finite-difference （FD） method and the hybrid method are investigated. The wavefield extrapolation of four-way splitting scheme is accomplished on a data line and is stable unconditionally. Numerical analysis of splitting errors show that the two-way FD migration have visible numerical anisotropic errors, and that four-way FD migration has much less splitting errors than two-way FD migration has. For the hybrid method, the differences of numerical anisotropic errors between two-way scheme and four-way scheme are small in the case of lower lateral velocity variations. The schemes presented in this paper can be used in 3D post-stack or prestack depth migration. Two numerical calculations of 3D depth migration are completed. One is the four-way FD and hybrid 3D post-stack depth migration for an impulse response, which shows that the anisotropic errors can be eliminated effectively in the cases of constant and variable velocity variations. The other is the 3D shot-profile prestack depth migration for SEG/EAEG benchmark model with two-way hybrid splitting scheme, which presents good imaging results. The Message Passing Interface （MPI） programme based on shot number is adopted.     

掺杂铕和铽的卤硼酸盐荧光体的制备及光谱特征

采用高温固相法在空气中合成了一系列掺杂稀土离子的卤硼酸盐荧光体, 研究了其发光性质和基质组成对稀土离子共掺杂的荧光体发光性质的影响. 研究结果表明, 在Eu3+和Tb3+共掺杂的体系中存在电子转移, 因此出现了Eu3+, Eu2+和 Tb3+共存于同一基质共同发射的现象. Ce3+对Eu2+和Tb3+具有敏化作用, 可增强其发射强度. 基质的组成对稀土离子的发射峰位和发射强度有明显影响.