玻色─爱因斯坦关联半径和源半径对实验窗口的依赖及它们的差异

研究了１６０ＡＧｅＶＰｂ＋Ｐｂ反应中π源的玻色─爱因斯坦关联半径和源半径（均方根半径）的关系，以及它们对实验窗口的依赖。模型冗源由ＵＲＡＳｉＭＡ生成器产生。研究表明关联半径和源半径不仅数值不等，而且变化行为也不同。     

Ageing of wet-synthesized oxide powders

Wet chemical synthesis of precursor oxide ceramics is a method to obtain small particulate powders. Such powders are far more prone to ageing in air than more traditional precursors. Thermogravimetric analysis is used to highlight the species responsible for the ageing of ceramic precursors. Indeed water and carbon dioxide are observed to evolve from aged powders. Ceramics obtained from aged precursors can reach a very low final density with respect to the theoretical value. A large degree of the original sintering properties can be recovered after washing the aged powders with ethanol in a basic medium.     

Graphitic nanofillers in PMMA nanocomposites—An investigation of particle size and dispersion and their influence on nanocomposite properties

Mechanical, thermal, and electrical properties of graphite/PMMA composites have been evaluated as functions of particle size and dispersion of the graphitic nanofiller components via the use of three different graphitic nanofillers: “as received graphite” (ARG), “expanded graphite,” (EG) and “graphite nanoplatelets” (GNPs) EG, a graphitic materials with much lower density than ARG, was prepared from ARG flakes via an acid intercalation and thermal expansion. Subsequent sonication of EG in a liquid yielded GNPs as thin stacks of graphitic platelets with thicknesses of ～10 nm. Solution‐based processing was used to prepare PMMA composites with these three fillers. Dynamic mechanical analysis, thermal analysis, and electrical impedance measurements were carried out on the resulting composites, demonstrating that reduced particle size, high surface area, and increased surface roughness can significantly alter the graphite/polymer interface and enhance the mechanical, thermal, and electrical properties of the polymer matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2097–2112, 2007     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: Thermal treatment effect

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher than 2 MPa, the carbon dioxide solubility is larger in PLA 80:20 than in PLA 98:2, indicating that the L:D plays a dominant role on this property. The thermal treatments only affect the gas solubility in PLA 98:2. Sorption isotherms at temperatures 303, 313, and 323 K, below the glass transition temperature of the polymer, and pressures up to 5 MPa were measured and analyzed with three different models, the dual‐mode sorption model, the Flory–Huggins equation, and a modified dual‐mode sorption model where the Henry's law term was substituted by the Flory–Huggins equation. This last model performs especially well for CO₂ in PLA 80:20, due to the convex upward curvature of the solubility isotherms for that system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 616–625, 2007     

LD端抽运平直腔Nd:YVO4固态激光器的输出功率特性研究

对LD端抽运平直腔Nd:YVO₄固态激光器输出功率特性受激光器内在诸因素(热透镜效应、腔长、激活孔径等)的制约关系进行了研究.并用传播圆-变换圆图解分析方法给出了合理的解释，同时，对进一步提高其输出功率特性指出了方向. 关键词： 固体激光器 热透镜 变换圆 平直腔     

Regularization of some linear ill-posed problems with discretized random noisy data

For linear statistical ill-posed problems in Hilbert spaces we introduce an adaptive procedure to recover the unknown solution from indirect discrete and noisy data. This procedure is shown to be order optimal for a large class of problems. Smoothness of the solution is measured in terms of general source conditions. The concept of operator monotone functions turns out to be an important tool for the analysis.

     

中高温工质在蒸发器中的换热模拟分析

本文采用分布参数的方法,建立了水源热泵中普遍采用的壳管式蒸发器稳态数学模型.通过中高温水源热泵试验台的实验数据同模拟计算结果的对比,验证了数学模型的准确性。应用此数学模型对中高温工质HTR01、HTR02及R134a在蒸发器典型制热运行工况,进行了模拟计算。得出了三种工质制冷剂侧换热系数沿管长的变化关系并对三种工质的换热性能进行了对比分析,为采用中高温工质的水源热泵换热器设计提供了参考依据.     

离化团簇束法制备c轴取向的ZnO薄膜

为了探索低温可调控ZnO薄膜沉积技术,提出了一种新的ZnO薄膜制备方法,即离化团簇束（ICB）法,并自行设计研制了应用该方法制备ZnO薄膜的专门装置.采用超音速喷嘴获得高速锌原子团簇束,用Hall等离子体源产生氧离子束离化锌原子团簇,获得了较高的离化率.在沉积过程中,可以通过调节衬底偏压、氩氧比、衬底加热温度等参数,来控制成膜的质量;应用这个装置成功地在硅衬底上制备的ZnO薄膜,经XRD和EDS检测,薄膜的c轴取向一致,Zn、O原子百分比接近于1：1,成膜质量好.     

激光介质的多次吸收不均匀内热源模型

针对激光介质的内热源,以多次吸收作用为基础提出了适用于侧面双向泵浦板状激光介质的不均匀内热源模型,即多次吸收不均匀内热源模型,并与均匀内热源和一次吸收内热源模型进行了对比分析。研究表明,介质厚度及光吸收系数组成的无量纲参数不同时,三种内热源模型得到的内热源分布也有所不同。最后给出了内热源不均匀度及多次吸收模型与一次吸收模型之间的差异在不同目标值下的内热源模型适用准则。     

200MW非再热双抽供热机组变工况计算及工况图的绘制

工况图在热电厂的设计和运行中具有广泛的用途。本文根据引进型双抽非再热200MW供热机组的技术特点，通过编程在纯凝汽工况、单抽工业抽汽工况、单抽采暖抽汽工况和双抽供热等典型变工况计算的基础上，完成了当新蒸汽负荷、工业抽汽负荷和采暖抽汽负荷发生改变时的变工况计算，并绘制了该机组的运行工况图．